• 한국수소및신에너지학회논문집
• /
• 제19권1호
• /
• pp.10-17
• /
• 2008

This study has been focused on the partial oxidation(POX) of n-octane over Rh-containing catalysts supported on alumina. The catalysts for this reaction were prepared by incipient wetness(IW) and co-gel(CG) methods, followed by the calcination at $900{\circ}C$ or $1,200{\circ}C$. When applied to the POX of n-octane carried out at $600{\circ}C$ with C/O=3 and GHSV=3,450/h, the catalyst prepared by the CG method and calcined at $1,200{\circ}C$ showed the best activity, yielding 42% syngas($H_2$+CO) with the $H_2$/CO ratio of $2{\sim}2.4$. To enhance the activity and stability of catalysts, bimetallic catalysts were synthesized by the CG method. As a result, the performance of Rh-Ni/$Al_2O_3$ catalyst was superior to that of Rh/$Al_2O_3$ catalyst in terms of the catalyst stability, due to the retarding effect on the Rh-to-$Rh_2O_3$ transition by the addition of Ni. This result was confirmed by XRD, TEM, and TPR characterizations.

• Journal of Information Display
• /
• 제13권3호
• /
• pp.97-100
• /
• 2012

We have conducted two kinds of the so-called charge-compensated aliovalent element substitutions to control the photoluminescence properties of $NaAlSiO_4:Eu^{2+}$ with a special focus on the enhancement of the excitation intensity at 400 nm. The aliovalent element substitutions include cation-cation and cation-anion co-substitutions according to the general formulas $Na_{1-x}M_xAl_{1+x}Si_{1-x}O_4:Eu^{2+}$ and $Na_{1-x}M_xAlSiO_{4-x}N_x:Eu^{2+}$ (M = $Mg^{2+}$, $Ca^{2+}$, and $Sr^{2+}$), respectively. The increase in the relative excitation intensity at 400 nm has been achieved in both types of the co-substitutions. Thus, the present research has demonstrated the effectiveness of the charge-compensated element substitution.

• 반도체공학회 논문지
• /
• 제1권1호
• /
• pp.9-13
• /
• 2023

본 연구에서는 SnO₂ 나노입자와 Pd 금속의 이중층으로 구성된 촉매층을 갖는 AlGaN/GaN 이종접합 기반의 상온동작 수소센서를 제작하여 해당 센서의 안정성 개선 연구를 수행하였다. 제작된 센서를 고온 환경이 아닌 상온에서 수소에 노출 및 차단을 반복하며 동작 시켰을 때 시간에 따라 대기전류가 감소하는 불안정한 전류 드리프트 (current drift) 현상이 발생하였지만, 자외선 (UV) 조사를 함께 진행하면서 반복 측정을 하였을 때 해당 불안정성의 가시적인 개선 효과를 이루었다.

• Korean Chemical Engineering Research
• /
• 제45권6호
• /
• pp.566-572
• /
• 2007

본 연구에서는 DME 직접 합성을 위한 혼성촉매가 두 가지 방법으로 제조되었으며, 이들의 촉매적 활성이 조사되었다. DME 합성을 위한 혼성촉매는 메탄올 합성과 메탄올 탈수반응에 촉매적 활성을 가진 성분들로 제조되었다. 메탄올 합성촉매는 Cu와 Zn이 함유된 전구물질로부터 합성되었으며, 메탄올 탈수촉매는 ${\gamma}-Al_2O_3$를 이용하였다. 두 촉매는 물리혼합법과 침전법에 의해서 혼성촉매로 제조되었다. 물리혼합법은 두 촉매를 분말상태에서 혼합하는 것이며, 침전법은 ${\gamma}-Al_2O_3$ 촉매상에 Cu-Zn 또는 Cu-Zn-Al 성분을 퇴적시키는 방법이다. 제조된 촉매의 물리적 특성을 조사하기 위하여 X선 회절법에 의한 결정구조, 질소흡착에 의한 BET 표면적, $N_2O$ 화학흡착에 의한 Cu의 표면적 그리고 주사전자현미경에 의한 표면형상 등이 조사되었다. 또한 이들 혼성촉매의 촉매적 활성은 여러 가지 반응조건을 변화시키면서 조사되었다. 이때 반응온도는 $250{\sim}290^{\circ}C$, 반응압력은 30~70 atm, $[H_2]/[CO]$ 몰비는 0.5~2.0, 그리고 공간속도는 $1,500{\sim}6,000 h^{-1}$ 촉매활성이 조사되었다. 반응성 실험 결과로부터 침전법으로 제조된 혼성촉매(CP-CZA/D)가 물리혼합법으로 제조된 혼성촉매(PM-CZ+D)보다 우수한 반응성을 나타냄을 확인할 수 있었으며, 특히 반응 온도, 압력, $[H_2]/[CO]$ 비, 공간속도가 각각 $260^{\circ}$, 50 atm, 1.0, $3,000h^{-1}$인 조건에서 침전법에 의해 제조된 촉매의 CO 전화율이 72%로 물리혼합법으로 제조된 촉매보다 약 20% 이상 높았다. $N_2O$ 화학흡착실험으로부터 Cu 표면적을 측정한 결과, PM-CZ+D 혼성촉매보다 CP-CZA/D 혼성촉매의 Cu 표면적이 더 높았다. 그러므로 침전법으로 제조된 혼성촉매상의 Cu입자가 더 잘 분산되었기 때문에 촉매의 활성이 개선된 것으로 판단된다.

• 천문학회보
• /
• 제43권1호
• /
• pp.66.2-66.2
• /
• 2018

The probability distribution function of column density (N-PDF) has been used for studying the characteristics of molecular clouds. In particular, the properties of N-PDF can reveal the nature of turbulence and gravity inside the molecular cloud. We use the dust continuum emission at $450{\mu}m$ and $850{\mu}m$ observed as part of the JCMT Gould Belt Survey (GBS) (Mairs et al. 2016), the 12CO J=1-0 line observed with the 45 m telescope at Nobeyama Radio Observatory (NRO) (Shimajiri et al. 2011), 13CO, C18O and HCO+ J=1-0 observed with the 13.7 m telescope at Taeduk Radio Astronomy Observatory (TRAO), as part of the TRAO key science project, "mapping Turbulent properties In star-forming MolEcular clouds down to the Sonic scale" (TIMES; PI: Jeong-Eun Lee). We here present the N-PDFs derived from the continuum and the molecular line emission toward the Orion A molecular cloud and compare their behaviors in order to investigate the chemical and optical depth effects on the N-PDF.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1999년도 특별강연 및 춘계학술발표대회 개요집
• /
• pp.118-121
• /
• 1999

• 한국자기학회지
• /
• 제15권1호
• /
• pp.17-20
• /
• 2005

RF magnetron sputtering 법으로 Co-Fe-Al-O계 박막을 상온에서 제작하여 산소분압에 따른 포화자화, 보자력, 이방성자계, 고주파에서의 투자율(1 GHz)을 조사하였다. 최적조건인 4%의 산소분압에서 제조한 $Co_{69.9}Fe_{20.5}A_{14.4O_{5.2}$ 박막은 포화자속밀도 18.1kG, 보자력 0.82 Oe, 이방성자계 24 Oe, 실효 투자율(1 GHz) 1,024의 우수한 연자성을 나타내었다. Co-Fe-Al-OrP 박막의 전기비저항은 산소분압이 560.7 ${\mu}{\omega}cm$ 이었다. 따라서 약 560.7${\mu}{\omega}cm$의 높은 전기바저항과 24 Oe의 높은 이방성 자계 때문에 $Co_{69.9}Fe_{20.5}A_{14.4O_{5.2}$ 박막이 고주파에서 우수한 연자기적 성질을 가지는 것으로 판단된다.

• Bulletin of the Korean Chemical Society
• /
• 제18권12호
• /
• pp.1291-1295
• /
• 1997

The catalytic dehydrocoupling of di-n-butylstannane n-Bu2SnH2 by the Cp2MCl2/Red-Al (M = Ti, Zr, Hf) and M(CO)6/Red-Al in situ combination catalysts yielded a mixture of two kinds of catenated products: one is a cross-linked insoluble solid, and the other is a non-cross-linked soluble solid (≒Sn5) or viscous oil (≒Sn2). The soluble oligostannanes could be produced by simple dehydrocoupling of n-Bu2SnH2, whereas the insoluble polystannanes could be obtained via disproportionation/dehydrocoupling combination process of n-Bu2SnH2. The disproportionation/dehydrocoupling combination process may initially produce a low-molecular-weight oligostannane with partial backbone Sn-H bonds which could then undergo an extensive cross-linking reaction of backbone Sn-H bonds, resulting in the formation of an insoluble polystannane.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.594-597
• /
• 1999

The new green and red phosphors for PDP application activated by T $b^{3+}$ and E $u^{3+}$ were synthesized, and their photoluminance properties were investigated. It was found that the brightness of $Al_3$Gd $B_4$ $O_{12}$ :T $b^{3+}$ green phosphor under 147nm VUV irradiation was higher than that of commercial Z $n_2$ $SiO_4$:M $n^{2+}$ phosphor. But the emitting intensity of A1$_3$Gd $B_4$ $O^{12}$ :E $u^{3+}$ red phosphor was inferior to the commercial (Y,Gd)B $O_3$:E $u^{3+}$. $Al_3$Gd $B_4$ $O_{12}$ Phosphor had a strong excitation band at 160nm associated with the host absorption, and also the photoluminance excitation intensity of $Al_3$Gd $B_4$ $O_{12}$ :T $b^{3+}$ was higher than that of Z $n_2$ $SiO_4$:M $n^{2+}$, but the intensity of $Al_3$Gd $B_4$ $O_{12}$ :E $u^{3+}$ phosphor was smaller than (Y,Gd)B $O_3$:E $u^{3+}$ phosphor In the VUV range. C $e^{3+}$ co-doping in A1$_3$Gd $B_4$ $O^{12}$ :E $u^{3+}$ and substitution of $Al^{3+}$ by G $a^{3+}$ A1$_3$Gd $B_4$ $O^{12}$ :E $u^{3+}$ phosphor were tried, but they did not improved the optical property .d the optical property .ty .

• 대한치과기공학회지
• /
• 제30권1호
• /
• pp.25-31
• /
• 2008

Cp-Ti and Ti-6Al-4V alloys commonly used dental implant materials, particularly for orthopaedic and osteosynthesis because of its suitable mechanical properties and excellent biocompatibility. This alloys have excellent corrosion behavior in the clinical environment. The first factor to decide the success of dental implantation is sufficient osseointegration and high corrosion resistance between on implant fixture and its surrounding bone tissue. In this study, in order to increase corrosion resistance and biocompatibility of Cp-Ti and Ti-6Al-4V alloy that surface of manufactured alloy was coated with TiN by RF-magnetron sputtering method. The electrochemical behavior of TiN coated Cp-Ti and Ti-6Al-4V alloy were investigated using potentiodynamic (EG&G Co, PARSTAT 2273. USA) and potentiostatic test (250mV) in 0.9% NaCl solution at 36.5 $\pm$ 1$^{\circ}C$. These results are as follows : 1. From the microstructure analysis, Cp-Ti showed the acicular structure of $\alpha$-phase and Ti-6Al-4V showed the micro-acicular structure of ${\alpha}+{\beta}$ phase. 2. From the potentiodynamic test, Ecorr value of Cp-Ti and Ti-6Al-4V alloys showed -702.48mV and -319.87mV, respectively. Ti-6Al-4V alloy value was higher than Cp-Ti alloy. 3. From the analysis of TiN and coated layer, TIN coated surface showed columnar structure with 800 nm thickness. 4. The corrosion resistance of TiN coated Cp-Ti and Ti-6Al-4V alloys were higher than those of the non-coated Ti alloys in 0.9% NaCl solution from potentiodynamic test, indicating better protective effect. 5. The passivation current density of TiN coated Cp-Ti and Ti-6Al-4V alloys were smaller than that of the noncoated implant fixture in 0.9% NaCl solution, indicating the good protective effect resulting from more compact and homogeneous layer formation.