• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.525-536
• /
• 2009

The current residential process adheres to a traditional method of construction involving wood framing on-site on poured concrete foundations which has been widely applied in North America. A conventional residential construction process can include seventeen distinct stages ranging from stake-out to pre-occupancy inspection. The current practice possesses short comings including high construction material wastes, long scheduling timelines, adverse weather conditions, poor quality, low efficiencies and negative environmental impacts from transportation and equipment use. Over CAN $5 billion dollars was spent in the construction sector during 2007 in Canada. Previous findings in CO₂ emissions during the construction process of a conventional dwelling emphasize more than 45 tonnes of CO₂ emissions. Hence, in Alberta alone during 2007, almost 50,000 residential units would release more than two million tonnes of CO₂. These numbers demonstrate the economical and environmental impact in building construction and its relationship with CO₂ emissions. The aim of this paper is to quantify the CO₂ emissions from the current residential construction process in order to establish the baseline for CO₂ emission reduction opportunities. The quantification collection methodology will be approached by identifying the seventeen various stages of construction and quantifying the contributions of CO₂ from specific activities and their impacts of work for each stage. The approach of separating these into separate stages for collection will allow for independent opportunities for analysis from various independent contractors from the entire scope of work. The use of BIM will be implemented to efficiently quantify CO₂ emissions. Based on the CO₂ quantification baseline, emission reduction opportunities such as an industrialized construction process will be introduced that allows homebuilders to reduce the environmental and economical impact of home construction while enabling them to produce higher quality, more energy efficient homes in a safer and shorter period of time.

• Korean Journal of Forensic Psychology
• /
• v.11 no.1
• /
• pp.37-61
• /
• 2020

Lee, Khogali, Despodova, and Penrod (2019) demonstrated that American participants whose races are different from a defendant and a victim rendered more punitive judgments against the defendant in a same-race crime (e.g., White observer-Black defendant-Black victim) compared to a cross-race crime (e.g., White observer-Black defendant-Hispanic victim). The aim of the current study was to test the replicability of their findings in a different country-South Korea. Study 1a failed to replicate the race-combination effect in South Korea with three new moderators-case strength, defendant's use of violence, and race salience. Study 1b was conducted with the same design of Study 1a in the United States to examine whether the failure of the replication in Study 1a was due to cultural differences between South Korea and the United States. However, Study 1b also failed to replicate the race-combination effect. Study 2 conducted a meta-analytic review of the data from Lee et al.'s (2019) study, along with the data from Study 1a and 1b and revealed that the race-salience manipulation in Study 1a and 1b might have caused the null results. We conclude that when people' races are different from both a defendant and a victim, they are likely to render more punitive judgments against the defendant in a same-race crime than a cross-race crime. However, the race-combination effect is only sustained when race-relevant issues are not salient in the crime.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4102-4110
• /
• 2022

Aiming at high-power and long-pulse operation up to 1000 s, some improvements have been made for both 2.45 GHz and 4.6 GHz lower hybrid (LH) systems during the recent 5 years. At first, the guard limiters of the LH antennas with graphite tiles were upgraded to tungsten, the most promising material for plasma facing components in nuclear fusion devices. These new guard limiters can operate at a peak power density of 12.9 MW/m². Strong hot spots were usually observed on the old graphite limiters when 4.6 GHz system operated with power >2.0 MW [B. N. Wan et al., Nucl. Fusion 57 (2017) 102019], leading to a reduction of the maximum power capability. With the new limiters, 4.6 GHz LH system, the main current drive (CD) and electron heating tool for EAST, can be operated with power >2.5 MW routinely. Long-pulse operation up to 100 s with 4.6 GHz LH power of 2.4 MW was achieved in 2021 and the maximal temperature on the guard limiters measured by an infrared (IR) camera was about 540 ℃, much below the permissible value of tungsten material (~1200 ℃). A discharge with a duration of 1056 s was achieved and the 4.6 GHz LH energy injected into the plasma was up to 1.05 GJ. Secondly, the fully-active-multijunction (FAM) launcher of 2.45 GHz system was upgraded to a passive-active-multijunction (PAM), for which the density of optimum coupling was relatively low (below the cut-off value). Good coupling with reflection coefficient ~3% has been achieved with plasma-antenna distance up to 11 cm for the new PAM. Finally, in order to eliminate the effect of ion cyclotron range of frequencies (ICRF) wave on 4.6 GHz LH wave coupling, the location of the ICRF launcher was changed to a port that is located 157.5° toroidally from the 4.6 GHz LH system and is not magnetically connected.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.3
• /
• pp.383-391
• /
• 2017

In image processing, image segmentation has been studied by various methods in a long time. Image segmentation is the process of partitioning a digital image into multiple objects and face detection is a typical image segmentation field being used in a variety of applications that identifies human faces in digital images. In this paper, we propose a method for extracting the contours of faces included in images. Using the Viola-Jones algorithm, to do this, we detect the approximate locations of faces from images. But, the Viola-Jones algorithm could detected the approximate location of face not the correct position. In order to extract a more accurate face region from image, we use skin color in this paper. In details, face region would be extracted using the analysis of horizontal and vertical histograms on the skin area. Finally, the face contour is extracted using snake algorithm for the extracted face area. In this paperr, a modified snake energy function is proposed for face contour extraction based snake algorithm proposed by Williams et al.[7]

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.1
• /
• pp.1-14
• /
• 2010

Until now, the evaluation method of spalling depth using Martin et al. (1999)'s linear regression relations has long been known applicable. However, it is not likely that the proposed equation is applicable to the openings other than circular type and mostly overpredict the spalling depth in comparison with actual spalling cases. Moreover, the evaluation method to estimate the spalling width has not been presented yet; it is essential to evaluate the spalling width in addition to the spalling depth, because the shape of the spalled region influences the choice of suitable rock reinforcement. In this study, linear regression equations, in which normalized spalling depth ($d_f/W_D$) and normalized spalling width ($w_f/W_D$) are functions of three spalling evaluation indices, ${\sigma}_1/{\sigma}_c,\;D_{is}(={\sigma}_{max}/{\sigma}_c)$ and ${\sigma}_{dev}/{\sigma}_{cm}$, are established based on in-situ spalling observations and CWFS simulation results. Confidence intervals of 95% using the statistical inference theory are used in verifying the reliability of linear regression equations. Spalling depth ($d_f$) and spalling width ($w_f$) predicted from the proposed linear regression relations, which take three spalling evaluation indices into account, showed reasonable match with in-situ observations by adopting weighting factors considering the degree of variance of linear regression relations.

• International Area Studies Review
• /
• v.15 no.1
• /
• pp.469-493
• /
• 2011

This paper attempts to examine the economic impact of technological barrier to trade(TBT) between Korea and China by using international input-output approach. With the tariff/quota reduced or eliminated since WTO's launch, the interest in TBT as a non-tariff barrier has been increased, and then there have so far been a large number of empirical studies on quantifying its effect in foreign. But still this area of study in Korea is limited in the literature survey. In encouraged in this situation, focusing on bilateral trade between Korea and China, which has been significantly increased in recent years, we have tried to estimates the impact of TBT on their output and employment. We use Asian International Input-Output Table(AIIO) for the year 2000 published by IDE-JETRO, and also use the estimated sectoral TBT provided by Ha et al.(2010). According to the result, there will be generated $3.63 billions values in outputs, and 18.1 millions persons in employments at most. And also we found that there is weak interdependence in sectoral and spatial linkage between two countries.

• Journal of Service Research and Studies
• /
• v.14 no.2
• /
• pp.69-81
• /
• 2024

The The purpose of this study is to have a positive impact on the evaluation of the traditional market revitalization project by discussing the business details and implementation process of the commercial district revitalization project in depth. The research method uses practical methods for traditional market revitalization projects. First, the activation method of the place was examined through the concepts of Oldenburg's 'Third Place' and Carr et al.'s 'Five Demands for Public Space' and the theories related to non-face-to-face transactions were examined. The first study case was the commercial district revitalization project of the Cheongju Global Market Development Project(Seongan-gil Street Shopping Mall and Yukgeori traditional Market), which discussed revitalization of open space, revitalization through reproduction, and revitalization through festivals. The revitalization project through representation is a project to install a symbolic sculpture at the estimated location of the 'Namseokgyo' buried in Yukgeori traditional Market. The revitalization through the festival is the Korea Sale Festa, which is a vibrant business due to increased sales at traditional markets and shopping malls and floating population in open spaces. The second study case was the Cultural Tourism Promotion Project(Hanmin traditional Market), which discussed revitalization through the development of local brands and SNS content. In the conclusion, the relationship between the six projects and commercial district revitalization methods was discussed, and policy recommendations were made, mentioning the importance of reflecting regional characteristics in design planning. We hope that this study will be used to positively evaluate the traditional market revitalization project, showing that stakeholders are working hard to produce positive results within institutional limitations.

• Journal of Mushroom
• /
• v.22 no.1
• /
• pp.27-30
• /
• 2024

As a member of ectomycorrhizal fungi, Tricholoma matsutake has a symbiotic relationship with its host, Pinus densiflora. To cultivate T. matsutake artificially, the co-cultivation of T. matsutake mycelia and bacteria from shiro was introduced. In this study, bacteria were isolated from soil samples in Bonghwa-gun, and seven bacterial isolates (B22_7_B05, B22_7_B06, B22_7_B07, B22_7_B08, B22_7_B10, B22_7_B13, and B22_7_B14) promoted the growth of T. matsutake mycelia (147.48, 232.11, 266.72, 211.43, 175.17, 154.62, and 177.92%, respectively). Sequencing of the 16S rRNA region of the isolated bacteria was performed. B22_7_B05 and B22_7_B10 were identified as Bacillus toyonensis, B22_7_B06 and B22_7_B08 as Paenibacillus taichungensis, B22_7_B07 and B22_7_B14 as P. gorilla, and B22_7_B13 as P. odorifer. These bacterial isolates were associated with the shiro community and are expected to contribute to the cultivation of T. matsutake.

• Journal of Mushroom
• /
• v.22 no.1
• /
• pp.31-36
• /
• 2024

Plastics are widely used in industries in human society and because of their structural stability, degradation is a serious global issue. To estimate the degradation of plastic, 31 edible mushrooms were cultured with the selected plastic films (polyethylene [PE], polystyrene [PS], and poly(ethylene terephthalate) [PET]) for 3 months at 25 ℃. Measuring the weight of the films showed that four species of mushrooms, namely Porostereum spadiceum, Ganoderma lucidum, Coprinellus micaceus, and Pleurotus ostreatus, exhibited the highest degrees of plastic degradation. In addition, the mushrooms and fungi that exhibited the most significant plastic degradation were cross-cultured to promote this degradation. As a result, cross-cultivation of G. lucidum and Aspergillus niger showed a weight loss of 2.49% for the PET film. For the PS film, Aspergillus nidulans showed a weight loss of 4.06%. Cross-cultivation of A. nidulans and C. micaceus, which showed a weight loss of 2.95%, was noted as an alternative for PS biodegradation, but is harmful to humans. These bio-degradation effects of edible mushroom will contribute to the development of alternatives for eco-friendly plastic degradation.

• Journal of Embryo Transfer
• /
• v.19 no.2
• /
• pp.155-163
• /
• 2004

The aims of this study are 1) to test oocytes and embryos collected from in-vitro to achieving the valuable protocol by culturing, vitrifying and thawing of oocytes/embryos, and 2) to transfer them to recipient, and finally have resulted in pregnancies from recipient females after surgical or nonsurgical transfer. In vitro maturation and fertilization were performed according to Funahashi et al (1994). Glucose-free NCSU 23 supplemented with 5 mM sodium pyruvate, 0.5 mM sodium lactate and 4 mg/ml bovine serum albumin for 2 days at $39^{\circ}C$, and 10% fetal bovine serum albumin was added to the culture medium thereafter. Embryos were treated with 7.5 ${\mu}g/ml$ cytochalasin-B for 30 min, centrifuged at 13,000 rpm for 13 min and then exposed sequentially to an ethylene glycol(EG) vitrification solution, aspirated into OPS, and plunged/thawed into/from liquid nitrogen. In vivo embryos were surgically collected from three dornors after AI for control group. Forty-nine embryos were washed 3 times in mPBS + 10% FBS, followed treatments : cultured, centrifuged, vitrified, recovered and transferred to recipients as in vitro prepared embryos. Three recipients were transferred individually with 100, 100 frozen embryos derived from abattoir and 34 fresh embryos by surgically, and another three recipients were transferred individually with 150, 150 frozen embryos and 100 fresh embryos by nonsurgically, respectively. all recipient sows exhibited delayed returns to estrus. To our knowledge, theses results suggest that required an improved techniques, more vigorous embryos preparation and substitute to gilt with cleaner uterous condition.