• Korean Journal of Materials Research
• /
• v.23 no.2
• /
• pp.135-142
• /
• 2013

The Ti-6Al-4V extra low interstitial (ELI) alloy has been widely used as an orthopedic implant material because of its excellent mechanical properties and biocompatibility. However, it still has many problems, including a high elastic modulus and toxicity of the Al and V elements. Therefore, non-toxic biomaterials with a low elastic modulus need to be developed. A high energy mechanical milling (HEMM) process is introduced to improve the effect of sintering. Rapid sintering of spark plasma sintering (SPS) under pressure was used to make an ultra fine grain of Ti-25 wt.%Nb-7 wt.%Zr-10 wt.%Mo-(10 wt.%CPP) composites with bio-attractive elements for increasing strength. These composites were fabricated by SPS at $1000^{\circ}C$ at 60 MPa using HEMM powders. During the sintering process, $CaTiO_3$, TixOy, and CaO were formed because of the reaction between Ti and CPP. The effects of CPP content on the physical and mechanical properties of the sintered Ti-Nb-Zr-Mo-CPP composites were investigated. The biocompatibility and corrosion resistance of the Ti-Nb-Zr-Mo alloys were improved by the addition of CPP.

• Journal of the Korean Chemical Society
• /
• v.54 no.5
• /
• pp.506-514
• /
• 2010

A new series of ligands N-[(benzoylamino)-thioxomethyl]-amino acid (HL) were synthesized by reaction of benzoylisothiocyanate with various amino acids namely aspartic acid [BATA] (1), glutamic acid [BATG] (2), methionine [BATM] (3), leucine [BATL] (4), and tryptophan [BATT] (5). The ligands were characterized by elemental analysis, IR and NMR spectra. Some transition metal complexes ($ML_2$) for these ligands (6-8) were prepared; [M=Cu(II), Co(II), or Ni(II)], and characterized by elemental analysis, IR and $^1H$ NMR spectra. Antibacterial study showed that all the ligands have no antibacterial activity, whereas ($ML_2$) complexes; [M = Cu(II), Co(II), or Ni(II)] have antibacterial activity towards (Gram -ive) Escherichia (NCTC5933) and (Gram +ive) Staphylococcus (NCTC6571) and have no toxicity on (BALB/C) Albino mice.

• Restorative Dentistry and Endodontics
• /
• v.19 no.1
• /
• pp.64-72
• /
• 1994

Zinc Phosphate Cement hand been used for about more than 100 years in luting of cast gold inlay. But many scientists had been trying to develop the new form of luting agent because the ZPC hand shown the lack of adhesiveness on the tooth structure and the toxicity to the pulp tissue. Recently many researches about the surface treatment of the cast body are being done to increase the adhesion of cement to it. The conventional Class I gold inlays were fabricated in the 20 permanent molars. After the internal surface of the cast body was sandblasted with $Al_2O_3$ particles and was tin-plated, the inlays were cemented with adhesive cement [G I cement and resin cement(Super-Bond & $Panavia_{EX}$)] and the evaluation on the adhesion pattern, adhesive strength and the fracture pattern of the adhesive cast gold inlay was compared to that of the cast gold inlay cemented conventionally with ZPC. The results were as follows : 1. The surface roughness of the cast body was increased significantly after sandblasting with the $Al_2O_3$ particles and the tin oxide layer, which was consisted of round particles, came into being. 2. The bond strength was in the order of Super-Bond, ZPC, Fuji I, $Panavia_{EX}$ group. The group cemented with Super-Bond showed statistically greater strength than the other groups(p<0.05). 3. The group cemented with ZPC was fallen apart by principal adhesion failure and that with Fuji I was by complete adhesion failure. But the group with Super-Bond showed pricncipal cohesive failure pattern and in the group with $Panavia_{EX}$, complete cohesive fracture pattern was shown and small protion of tooth structure was fractured out with cast body and the fractured surface showed the figure just as the enamel prism. 4. Various gaps were shown at the pulpal side regardless of little gap at the side walls of the cavity in all groups. Only the Super-Bond was attached to the tooth structure and the other cements were detached from both the tooth and the cast body.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.7
• /
• pp.514-520
• /
• 2014

In this study, the production potential of alternative coagulant ($Al_2(SO_4)_3$ solution) having the identical coagulation activity with respect to the commercial coagulant was investigated. The raw material of alternative coagulant was a spent catalyst including aluminium (waste activated alumina) generated in the manufacturing process of the polymer. The alternative coagulant was produced through a series of processes: 1) intense heat and grinding, 2) chemical polymerization and substitution with $H_2SO_4$ solution, 3) dissolution and dilution and 4) settling and separation. To determine the optimal operating conditions in the lab-scale autoclave and dissolver, the content of $Al_2O_3$ in alternative coagulant was analyzed according to changes of the purity of sulfuric acid, reaction temperature, injection ratio of sulfuric acid and water in the dissolver. The results showed that the alternative coagulant having the $Al_2O_3$ content of 7~8% was produced under the optimal conditions such as $H_2SO_4$ purity of 50%, reaction temperature of $120^{\circ}C$, injection ratio of $H_2SO_4$ of 5 times and injection ratio of water of 2.3 times in dissolver. In order to evaluate the coagulation activity of the alternative coagulant, the Jar-test was conducted to the effluent in aerobic reactor. As a result, in both cases of Al/P mole of 1.5 and 2.0, the coagulation activity of the alternative coagulant was higher than that of the existing commercial coagulant. When the production costs were compared between the alternative and commercial coagulant through economic analysis, the production cost reduction of about 50% was available in the case of the alternative coagulant. In addition, it was identified that the alternative coagulant could be applied at field wastewater treatment plant without environmental problem through ecological toxicity testing.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.1
• /
• pp.12-16
• /
• 2005

As a silicate source to rice, a coal ash was selected and mixed with phosphor-gypsum (50:50, wt $wt^{-1}$) to reduce the potential of boron toxicity and to supply calcium element. We expected that high con tent of calcium in this mixture might convert water-soluble phosphorus to less soluble forms and then reduce the release of soil phosphorus to surface runoff. The mixture was applied with the rate of 0, 20, 40, and 60 Mg $ha^{-1}$ in paddy soil (Nagdong series, a somewhat excessively drained loamy fine sand) in Daegok, Jinju, Korea The mixture reduced significantly water-soluble phosphorus (W-P) in the surface soils by shifting from W-P and Fe-P to Ca-P and Al-P during whole rice cultivation. In contrast with W-P, plant available phosphorus increased significantly with the mixture application due to high content of phosphorus and silicate in the mixture. The mixture of coal ash and phosphor-gypsum (50:50, wt $wt^{-l}$) would be a good alternative to reduce a phosphorus export in rice paddy soil together with increasing rice yields.

• Biomolecules & Therapeutics
• /
• v.7 no.4
• /
• pp.342-346
• /
• 1999

This study was performed to investigate the effect of cyclosporine (CsA) on glucose tolerance and peripheral insulin sensitivity in normal Sprague-Dawley rats. After daily treament of CsA (10 mg/kg, i.p.) for two weeks, glucose tolerance tests were carried out by the treatment of glucose (Glu, 2 g/kg, i.p.) alone or in conjunction with exogenous insulin (Ins; human regular insulin, 5 U/kg, s.c.) and measured the decrement of area under the time-plasma glucose concentration curve ($AUC_{o\longrightarrow120}$; g.min/ml) by the trapezoidal rule. The rats were divided into three groups (Glu- (Control), Ins+Glu- and CsA+Ins+Glu-, n=7 in each group). The $AUC_{o\longrightarrow120}$ of the CsA+Ins+Glu-group was significantly (p<0.01) lower than that of Glu-group (61.0% of control) and significantly (p<0.05) higher than that of Ins+Glu-group (197.4% of Ins+Glu-). The CsA+Ins+Glu- grou showed higher levels of maximal blood glucose concentration and higher $AUC_{o\longrightarrow120}$ than those of Ins+Glu-group in normal rats. Besides direct pancreatic toxicity of CsA previously reported (Hahn et al., 1972), these results suggest that CsA also make the possibility to induce peripheral insulin insensitivity and glucose intolerance in normal rats.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.452-452
• /
• 2013

ZnO is one of the most attractive transparent conductive oxide (TCO) films because of low toxicity, a wide band gap material and relatively low cost. However, the electrical conductivity of un-doped ZnO is too high to use it as TCO films in practical application. To improve electrical properties of undoped ZnO, transition metal (TM) doped ZnO films such as Al doped ZnO or Ti doped ZnO have been extensively studied. Here, we prepared Ti doped ZnO thin films by atomic layer deposition (ALD) for the application of TCO films. ALD was used to prepare Ti-doped ZnO thin films due to its inherent merits such as large area uniformity, precise composition control in multicomponent thin films, and digital thickness controllability. Also, we demonstrated that ALD method can be utilized for fabricating highly ordered freestanding nanostructures of Ti-doped ZnO thin films by combining with BCP templates, which can potentially used in the photovoltaic applications.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.14
• /
• pp.5863-5868
• /
• 2015

Nicotine-derived nitrosamine ketone (NNK) is considered a key tobacco smoke carcinogen inducing lung tumors. Physalis peruviana L (harankash) is considered one plant with marked health benefits. This study aimed to evaluate Physalis peruviana L effect on the toxic effect of NNK induced lung cancer in the rats by using pulmonary histopathological, immunohistochemical and DNA flow cytometric analyses. Sixty adult male rats were divided into four groups, each consisting of fifteen animals. The first group received saline, the second received two successive toxic doses of NNK only while the third received two successive toxic doses of NNK with a single daily dose of Physalis peruviana L. The fourth group received a single daily dose of Physalis peruviana L only. Toxic doses of NNK induced hyperplasia and adenocarcinoma in the lung and positive immunoreactivity for Ki-67 and p53 staining with disturbance of the lung DNA content. Administration of Physalis peruviana L with NNK led to a mild pulmonary hyperplasia and weak expression of Ki-67 and p53 with an improvement in the lung DNA content. Physalis peruviana L may protect against NNK induced lung carcinogenesis due to its antioxidant and anti-proliferative effects.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2003.10a
• /
• pp.177-177
• /
• 2003

Methylmercury (MeHg) is a well-known neurotoxicant that causes severe damage to the central nervous system in humans. Many reports have shown that MeHg is poisonous to human body through contaminated foods and has released into the environment. Despite many studies on the pathogenesis of MeHg-induced central neuropathy, no useful mechanism of toxicity has been established so far. In this study, suppressive subtractive hybridization (SSH) was performed to identify differentially expressed genes on human neuroblastoma cell line, SH-SY5Y treated with DMSO and MeHg (6.25 uM) for 6 hr. Differentially expressed cDNA clones were sequenced and were screened by dot blot to eliminate false positive clones. 13 of 35 screened genes were confirmed using real time RT-PCR. These genes include EB1,90-kDa heat-shock protein, chromosome condensation-related SMC-associated protein and brain peptide Al, etc. Analysis of these genes may provide an insight into the neurotoxic effects of MeHg in human neuronal cells and a possibility to develop more efficient and exact monitoring system of heavy metals as ubiquitous environmental pollutants.

• The Korean Journal of Ecology
• /
• v.26 no.2
• /
• pp.87-89
• /
• 2003

Although a forest damage of large area due to air pollution has not yet been found in Korea, declines of Korean red pine (Pinus densiflora Sieb. et Zucc.), the most common coniferous species, have been locally reported. To evaluate the effect of air pollution and acid deposition on the forests, SO$_2$ concentration, acid load, soil pH and tree decline were monitored for 13 years from 1988 to 2001 in Namsan, Doowang and Gyebangsan with the gradient of air pollution. During the study period, annual mean SO$_2$ concentration in Namsan, Doowang and Gyebangsan were 14 ppb, 13 ppb and 6 ppb, respectively. Annual mean acid loads in Namsan and Doowang were three to four times more than that in Gyebangsan. As respected, forest surface soils in Namsan and Doowang were acidified to pH 4.1 and 4.3, whereas that in Gyebangsan showed normal value as pH 5.4. On the other hand, decline degrees of Korean red pines in Namsan and Doowang in both 1996 and 2001 were higher than those in Gyebangsan. It is reasonable that the severer tree declines in Namsan and Doowang could be closely related with the higher air pollution, acid load, and the effects (possibly Ca deficit and Al toxicity) of soil acidification.