• Journal of the Korean Home Economics Association
• /
• v.38 no.3
• /
• pp.1-9
• /
• 2000

Saururus-chinensis was used for the natural due stuff extraction and concentration to produce the condensed dye liquid. Using this liquid, the silk and the cotton fabrics were dyed. And then the K/S value, color difference were measured in order to determine the dye ability and the antimicrobial activity. The K/S values of silk were much higher than those of cotton. In terms of the silk fabric, the Al, Cr-premordanting and Fe, Cu-simmordanting method was most efficient of the mordanting method. The various suface colors on the dyed fabric were resulted according to used mordants and mordanting methods. The dye fastness was significantly improved when mordants were added. Among them, Al-mordant improved more than 1 level. The Cu, Fe-mordants showed the greatest antimicrobial activity on both of mordant treat silk and cotton.

• Journal of the Korean Home Economics Association
• /
• v.41 no.2
• /
• pp.107-121
• /
• 2003

This study was discussed the dyeing of wool and nylon fabrics with Chinese Scholar Tree extract. The extracts of Chinese Scholar Tree was prepared in the condition of heating at $95{\pm}5C$, for 1 hour and cooling to 40C. And then the extracts of color matter treate with vacuum concentration at $60{\pm}2^{\circ}C$, 30mmHg and dried with spray dryer. The dyeing of wool and nylon fabric in this experiment was also employed the mordant dyeing method such as pre-mordant, post-mordant and simultaneous mordant method. The mordanting agents used in this study were as followings ; aluminium potassium sulfate, copper(II) acetate monohydrate, chromium potassium sulfate$.$$7H_2O$, Tin(II) chloride dihydrate, iron(II)sulfate $7H_2O$. For an evaluation of the dyeing property of the mordanting agents, the pre-mordant method, the repeat dyeing and the fastness of the light, dry cleaning, washing and rubbing measured respectively. From the results of the dye absorption, the optimum dyeing condition of the wool and nylon fabrics with Chinese Scholar Tree extract is at 80C dyeing temperature for 60 minutes. The optimum concentration of mordanting agent is Al, Cr, Sn 1%, Fe, Cu 2% solution. In general, the fastness property of the dyed wool and nylon fabrics had a comparatively high grade.

• Journal of Fashion Business
• /
• v.8 no.6
• /
• pp.137-145
• /
• 2004

According to the experimental results, it has been reported by several researchers that the air-permeability values of the fabrics mostly decreased by the mordanting during the dyeing procedure. The exact quantitative information, however, has not been presented so far. In this study, the change of the fabric air-permeability was investigated quantitatively. At the same time, the change of the fabric air-permeability according to the dyeing procedure. In order to investigate the possibility of the detachment of the metal ions on the fiber or fabric surface, the change of the air-permeability was investigated after several rinsing of the mordanted fabrics. By comparing the color differences of the cochineal dyed fabrics which were subjected to rinsing procedure after mordanting, the effect of the rinsing of the mordanted fabrics on the dyeing of fabrics was investigated. At the range of mordant concentration, 2% Cu, 2% Sn, 2% Fe, 2% Cr, 5% Al, the metal ions are not excessively absorbed on the fiber surface. Also, any remarkable detachment of the metal ions does not accompany after the mordanting with the subsequent rinsing procedure.

• Textile Coloration and Finishing
• /
• v.12 no.6
• /
• pp.389-395
• /
• 2000

A natural colorants was extracted from cherry by 10wt% aqueous acetic acid solution as an extractant. Silk and cotton fabrics were dyed with the cherry extract in the temperature range of $40-80^\circ{C}$ and for the time range of 30-60min. by pre- and post-mordanting with various mordants, their dyeability and fastness were investigated. The natural cherry extract prepared in this study has a maximum absorbance at 520nm. It was found that the optimum dyeing temperature and time were $40^\circ{C}$ and 50min, respectively. The pre-mordanting method was more effective than post-mordanting. All mordants except $SnCl_2\cdot{2H}_2O\;and\;FeSO_4\cdot{7H}_2O$ were effective for silk fabrics. However, the dyeability on cotton fabrics increased in the order of $CrK(SO_4)_2\cdot{12H_2O>(CH_3COO)_2Cu\cdot{H}_2O>CuSO_4\cdot{5H}_2O>AlK(SO_4)_2\cdot{12H}_2O>FeSO_4\cdot{7H}_2O>SnCl_2\cdot{2H}_2O$ among the mordants used in this study Fastness(light, water, washing, perpspiration fastness) on the silk and cotton fabrics increased with using mordants. The post-mordanting using mordant$(CH_3COO)_2Cu\cdot{H}_2O$ among the various mordants in this study gave the best fastness.

• Current Research on Agriculture and Life Sciences
• /
• v.30 no.2
• /
• pp.76-81
• /
• 2012

In this study the natural colorant was extracted from black bean seed coat in aqueous solution and used to dye silk and cotton fabrics. To obtain the optimal dyeing conditions it was examined at various dyeing condition (temperature, pH, time and liquor ratio). The dyeing behavior and the depths of shade which were evaluated in terms of K/S and CIELAB color difference values of the dyed and mordanted fabrics were also investigated. The dyeing fastness evaluated standard light and wash fastness tests. The obtained results were as follows ; The most K/S value of silk and cotton fabrics were obtained when the pH was 4.0 and 4.8, respectively and it increased slightly with dyeing time passes when the dyeing temperatures were at $40^{\circ}C$ and $60^{\circ}C$ but, it increased at $80^{\circ}C$. The color of silk fabrics changed from yellowish red to yellow at only Fe mordanting among various mordanting. Sn and Ti mordanting of silk fabric and only Ni mordanting of cotton fabric increased the $L^*$ values, but the others decreased. The light fastness of silk fabrics showed 4-6 grade without mordant, 4-5 grade with Al, 3-4 grade with Cu and Sn, and 2-3 grade with Fe as mordant, and that of cotton fabrics showed 1-2 grade without mordant, 2-3 grade with Fe, 2 grade with Cu, 1-2 grade with Al and Sn as mordants. All mordanting coluld not improve the light fastness of fabrics. Washing fastness(fade) of silk fabrics showed 2 grade without mordants and 2-3 grade with mordants and those of cotton fabrics showed 4 grade with Cu, 3 grade without mordant and with Al, Sn and Fe. All of the washing fastness(stain) of both fabrics showed 4-5 grade.

• Journal of Fashion Business
• /
• v.18 no.5
• /
• pp.69-81
• /
• 2014

Fabric made of 100% silk was dyed with Undaria pinnatifida extracts under different conditions such as varing colorant concentration, temperature, time and dyebath pH. The dye uptake (K/S, value), CIE L*,a*,b* and Munsell values of the dyed samples and mordanted samples were measured. Colorfastness, antibacterial property and UV protection property were also evaluated. As colorants concentration increased, the dye uptake increased progressively and maximum color strength was obtained at 100% V/V. Dye uptake also increased with increasing temperature and time, and the maximum color strength was obtained at $80^{\circ}C$ and 60min. With pre-mordanting, the color of the Al and Fe mordanted silk fabrics was yellow on the Munsell color system, while the Cu mordanted fabric was a greenish color. Al and Fe post-mordanted fabrics had a yellow tone, and the Cu post-mordanted fabric had a yellow greenish tone. The light fastness property of the Cu mordanted silk fabric was relatively good, The effect of Al and Fe mordanting on fastness was insignificant. The antibacterial activity of dyed and unmordanted silk fabric was excellent, whereas fabric dyed and mordanted with Undaria pinnatifida extract demonstrated superior ultraviolet protection.

• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.119-129
• /
• 2020

Unlike synthetic dyes, natural dyes do not affect the human body or create atmosphere pollution that are also mothproof, antibiotic and sterilized. This study examined the changes in dye adsorption properties according to mordant types and mordanting method to qualify trends using sage and rosemary extracts. Dyeability of sage extract is often similar to rosemary extract regardless of dyeing conditions. Dyeing properties of herb colorants on cotton, silk and wool fiber and effect of dyeing conditions on dye uptake were also compared. Dyed fabric showed a yellowish color and the dyeing affinity was somewhat good with rosemary extract. The surface color of the dyed fabrics was darkened by mordant treatment. The K/S value of herb colorants of protein fiber was higher than cellulose fiber. The concentration of mordant having the highest dyeing affinity was different from the mordant type. Regardless of the type of fiber, the K/S value of premordanting was the highest in mordanting method, and the K/S value of simultaneous mordanting indicated no noticeable mordant effect. The fastness of washing of silk fabric was reduced the most by mordant treatment. The lightfastness was reduced in Al mordant treatment regardless of the type of fiber. The lightfastness of wool increased somewhat by mordant treatment.

• Journal of Fashion Business
• /
• v.10 no.2
• /
• pp.18-26
• /
• 2006

In this study, the effects of chitosan pre-treatment on the mordanting effect and dyeability were investigated in the dyeing using Japanese pagoda tree. The chitosan treatment effects were evaluated mainly focused on the colors after dyeing of cotton and nylon fabrics which were treated with acidic aqueous solution of chitosan. In the case of chitosan untreated fabrics, the mordanting effects on the cotton and nylon were insignificant and the dyeability was very low. Regardless of the mordant types(Al, Sn, and Fe), the dyed fabrics exhibited almost identical yellowish colors. In the case of chitosan treated fabrics, dark colors were obtained compared to the case of chitosan untreated and ${\Delta}E$ values were increased significantly. In cotton fabrics, the most excellent result was obtained under the condition of unmordanted and chitosan treated fabrics. This verifies the fact that routin coloring matters establish direct linkages with the chitosan components, which exhibit cationic nature, easily. In nylon fabrics, the effects of mordanting treatment and chitosan treatment are so insignificant that the routin coloring matters are presumed to establish direct dyeing with the nylon molecular chains.

• Fashion & Textile Research Journal
• /
• v.19 no.3
• /
• pp.337-343
• /
• 2017

The purpose of this study is to investigate the optimal dyeing conditions and human-friendly properties of the extract from the branches of Alnus firma tree which is widely used for forestation and to provide basic information for quantification and commercialization of natural dyeing by discovering such as dye material. The optimal dyeing conditions, as a result, were shown at 100% of dye concentration, $90^{\circ}C$ of dyeing temperature and 40 minutes of dyeing time. In terms of dye uptake depending on the mordanting methods, it showed the best result in order of Fe, Sn, Cu and Al at pre-mordanting while found strong in order of Fe, Cu, Al and Sn at post-mordanting. Color fastness to washing and dry cleaning was found strong at grade 4-5 and fastness to light was rated at 2. The grade of change in color to rubbing and perspiration was good at 4-5. In aspects of functional properties, it showed excellent results of 98% deodorization rate at 120 minutes of dyeing time, 96.1% UV protection rate and 99.9% bacterial reduction against Staphylococcus aureus and Klebsiella pneuminiae. It is considered, therefore, the extract from Alnus firma tree is of great value as an eco-friendly natural dyestuff.

• Fashion & Textile Research Journal
• /
• v.17 no.6
• /
• pp.1004-1012
• /
• 2015

The purpose of this study is to investigate the loess dyeability of soybean fabric using loess as colorants. Recent days, various textile products such as inner wears, sheets and interior goods are manufactured using materials dyed with loess emphasizing its improved metabolism, anti-bacterial, deodorizing properties, and far infrared ray emissions. Soybean fabric was dyed with loess solution according to concentration of loess, dyeing temperature and dyeing time. To improve washing fastness, soybean fabric and dyed soybean fabric with loess were mordanted by mordanting agents such as sodium chloride(NaCl), Acetic acid(CH₃COOH) and Aluminium Potassium Sulfate(AlK(SO₄)₂·12H₂O). Dyeability and color characteristics of dyed soybean fabric were obtained by CCM observation. Particle size distribution of loess, the dyeability(K/S) of soybean fabric, morphology and washing durability of loess dyed soybean fabric were investigated. The results obtained were as follows; Mean average diameter of loess was 1.08µm. The main components of loess used in this study were silicon dioxide(SiO₂), aluminium oxide(Al₂O₃), and iron oxide(Fe₂O₃). The content of these three component was above 75 weight %. The dyeability of soybean fabric was increased gradually with increasing concentration of loess. The optimum dyeing temperature and dyeing time were 90℃ and 60minutes expectively. The fastness to washing according to concentration of loess and mordanting method indicated good grade result as more than 4 degree in all conditions.