• 한국기계가공학회지
• /
• 제20권4호
• /
• pp.127-134
• /
• 2021

In this study, the adhesive fracturing characteristics of a DCB specimen due to single and heterogeneous bonding materials under tearing load was investigated. The experiments were conducted to examine the fracturing properties of the adhesive DCB specimen. As an experimental condition, a forced displacement of 3mm/min was applied to one side while the other side was fixed. As a result of the experiment, it was found that the AL6061-T6 material was superior to the CFRP material in terms of maximum stress, specific strength, and energy release rate when compared to the adhesive fracturing property of a single material. We tested CFRP-AL, a heterogeneous bonding material, and compared its experimental results to the results from the single materials. Based on these results, CFRP-AL with a heterogeneous bonding material was observed to have the superior structural safety compared to single materials for the mode III fracture type.

• 한국산학기술학회논문지
• /
• 제20권2호
• /
• pp.7-13
• /
• 2019

본 연구에서는 이종경량재료의 마찰교반용접을 모사할 수 있는 유한요소 해석모델을 개발하고, 이를 통해 기초분석과 실용적 적용 가능성에 대해 고찰하였다. Coupled Eulerian Lagrangian 에 기반한 유한요소모델을 구성하였으며, 해석 모델은 외연적 시간적분을 이용하여 열-온도, 변위-응력 물리계로 이루어진 다중 물리계를 복합적으로 계산하며, 용접툴 표면과 피용접 재료 간 마찰, 극심한 소성변형으로 인한 열에너지 발생, 그리고, 밑면을 통한 열에너지 소산 등 열발생원과 열전달 메카니즘이 모두 고려되었다. Al6061T6와 AZ61 판재의 맞대기용접을 고려하였으며, 주요 용접변수인 용접 속도와 용접툴 회전속도를 변화시킨 세 가지 조건에 대해 해석을 실시하였다. 각 해석은 피용접물의 온도분포, 결함의 분포, 소성변형률 분포가 출력이 가능하였다. 구축한 모델을 이용한 해석 결과 알루미늄보다는 마그네슘부에서 더 높은 온도가 발생하였으며, 회전속도가 커질수록 최대 온도가 증가하기보다는 알루미늄쪽으로 높은 온도가 분산되어 가는 경향을 보였다. 또한, 회전속도가 커질수록 피용접물 재료가 위로 올라오는 플래시 결함의 경향 예측이 가능하였으나, 툴 주변 결함 형성예측은 메시가 세밀하지 못하여 정확한 결과를 산출하기에는 부족하다고 볼 수 있다. 본 모델은 마찰교반용접 중 발생 가능한 여러 물리계의 여러 물리적 현상을 실제에 가깝게 반영하고 있으며, 실험적으로 밝히기 어려운 기초 분석에 응용될 수 있으나, 1달이 넘는 해석소요시간을 감안하면 실용적으로 최적의 용접조건 도출에 응용되기는 어렵다고 판단된다.

• Journal of Welding and Joining
• /
• 제34권3호
• /
• pp.23-30
• /
• 2016

This paper discusses the optimization of friction stir spot welding (FSSW) process parameters for joining Aluminum alloy (AA6061-T6) with Magnesium alloy (AZ31B) sheets. Prior to optimization an empirical relationship was developed to predict the Tensile Shear Fracture Load (TSFL) incorporating the four most important FSSW parameters, i.e., tool rotational speed, plunge rate, dwell time and tool diameter ratio, using response surface methodology (RSM). The experiments were conducted based on four factor, five levels central composite rotatable design (CCD) matrix. The maximum TSFL obtained was 3.61kN, with the tool rotation of 1000 rpm, plunge rate of 16 mm/min, dwell time of 5 sec and tool diameter ratio of 2.5.

• 천문학회보
• /
• 제37권2호
• /
• pp.215.1-215.1
• /
• 2012

일반적인 천체 망원경의 반사경은 유리재질의 소재를 원하는 형상의 반사면으로 가공한 후 그 위에 알루미늄 코팅을 하여 사용한다. 하지만 본 연구에 사용된 망원경은 주경과 부경을 모두 알루미늄(Al-6061 T6)을 직접 가공하여 제작하였다. 알루미늄을 직접 가공하여 반사경을 만들 경우의 장점은 냉각이 필요한 기기에서 광구조물과 반사경의 열팽창 계수 차이를 신경 쓸 필요가 없으며 DTM(Diamond Turning Machine)을 이용할 수 있다는 것이다. 본 망원경은 망원경의 성능을 향상시키기 위하여 3매의 보정 렌즈를 사용한 반사굴절 망원경이며 구경은 200mm, 초점거리는 750mm, F수는 3.75이다. 주경과 부경은 각각 200 mm와 90 mm의 쌍곡면으로 설계 및 제작되었다. 본 연구에서는 DTM을 이용해 알루미늄 재질의 주경과 부경을 제작하고 이 반사경들의 측정 결과를 토대로 측정 결과와의 오차가 가장 작은 새로운 반사경 설계식을 유도하였다. 이 설계식을 이용하여 광학 설계 프로그램에서 망원경의 성능을 예측하였으며 실제 제작된 망원경을 이용하여 얻은 이미지와 비교한다.

• 한국기계가공학회지
• /
• 제17권5호
• /
• pp.70-75
• /
• 2018

This study analyzes the change of Al 6061-T6 specimen surface shape when undergoing microparticle spraying and analyzes the influence of factors on the experiment. Fine particle spraying is applied to the specimen and the surface shape of the processed surface is measured through a surface shape measuring device. The measured data was analyzed by the ANOVA method to investigate the effect of factors such as particle, nozzle diameter, pressure, injection height, and injection time on the injection depth and injection diameter.

• 한국정밀공학회지
• /
• 제13권5호
• /
• pp.122-130
• /
• 1996

In this study, machinability of some aluminum-magnesium alloy are experimentally investigated using polycrystalline diamond tool with turning, and evaluated some independent cutting variables affected micrometal cutting characteristics as cutting force, specific cutting resistance, shear angles. To know the effect of cutting parameters of single point diamond machining, experiments were performed to measure cutting forces for high speed turning of aluminum alloy 6061-T6, SM45C and FC20 with poly- crystalline diamond and coated cemented carbide tool. Independent cutting variables were changed to a variety of cutting speed, feed rate, rake angles, material properties of workpiece and tool. Futhermore. Some useful informations are obtained in this study can guide micro metal cutting of aluminum alloy with diamond tool.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.145-148
• /
• 2006

Cold gas dynamic spray is a relatively new coating process by which coatings can be produced without significant heating during the process. Cold gas dynamic spray is conducted by powder sprayed by supersonic gas jet, and generally called the kinetic spray or cold-spray. Cold-spray was developed in Russia in the early 1980s to overcome the defect of thermal spray method. Its low process temperature can minimize thermal stress and also reduce the deformation of the substrate. Most researches on cold-spray have focused on micro scale coating, but our research team tried to apply this method to macro scale deposition. The macro scale deposition causes deformation of a thin substrate which is usually convex to the deposited side. In this research, the main cause of the deformation was investigated using 6061-T6 aluminum alloy and properties of deposited aluminum layer such as coefficient of thermal expansion, Elastic modulus, hardness, electric conductivity were measured. From the result of the analysis, it was concluded that compressive residual stress was the main reason of substrate deformation while CTE had little effect.

• 소성∙가공
• /
• 제27권6호
• /
• pp.331-338
• /
• 2018

Electrohydraulic forming (EHF) process is a high speed forming process that utilizes the electric energy discharge in fluid-filled chamber to deform a sheet material. This process is completed in a very short time of less than 1ms. Therefore, finite element analysis is essential to observe the deformation mechanism of the material in detail. In addition, to perform the numerical simulation of EHF, the material properties obtained from the high-speed status, not quasi static conditions, should be applied. In this study, to obtain the parameters in the constitutive equation of Al 6061-T6 at high strain rate condition, a surrogate model using an artificial neural network (ANN) technique was employed. Using the results of the numerical simulation with free-bulging die in LS-DYNA, the surrogate model was constructed by ANN technique. By comparing the z-displacement with respect to the x-axis position in the experiment with the z-displacement in the ANN model, the parameters for the smallest error are obtained. Finally, the acquired parameters were validated by comparing the results of the finite element analysis, the ANN model and the experiment.

• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.2091-2099
• /
• 2001

Fatigue crack growth behavior of inclined cracked Al 6061-T6 thick aluminum plate(6mm) repaired with the bonded composite patch was studied. A 0°inclined crack bonded reinforced composite patch and 15°, 30°, 45°, 60°inclined crack plates were tested. The effect of patch and inclined angle were studied and compared to each other. Also we investigated to the crack propagation direction and debonding behavior during the fatigue crack growth test. In this paper. a study was con(ducted to get an fatigue life, fatigue crack growth ratio and crack growth direction. Finally, the effectiveness of composite patch on inclined cracked plate was investigated. The results demonstrated thats there was a definite variation in fatigue life and fatigue crack growth behavior depending on the inclined crack angle.

• 대한기계학회논문집A
• /
• 제37권4호
• /
• pp.483-490
• /
• 2013

알루미늄 소재의 냉간 판재성형에서는 낮은 성형성과 성형 후 과도한 스프링백에 의한 치수정밀도가 저감되는 문제가 있다. 이에 본 연구에서는 기존 제조공법의 문제점을 개선하기 위해 새로운 제조공법인 Hot forming quenching(HFQ)을 제시하고자 한다. HFQ 은 용체화처리 온도로 가열된 알루미늄 판재를 열간성형하고, 다이 내에 설치된 냉각채널에 의해 ��칭하여 열간성형과 열처리를 동시에 함으로써 성형성 향상, 스프링백 저감 효과를 얻을 수 있다. 기존의 냉간성형 대비 HFQ 의 성형성 향상효과를 에릭슨 시험을 통해 평가하였다. 스프링백 특성을 파악하기 위해 V-beding 시험에 HFQ 를 적용하여 굽힘 성형된 제품의 치수정밀도를 기존의 냉간성형과 비교하였다. 또한 강도 및 경도를 측정하여 기존 냉간 성형에 의한 값들과 비교함으로써 알루미늄 제품 성형에 HFQ 을 적용하기 위한 타당성을 평가하였다.