Kim, Jae-Won;Kim, Du-Hyeon;Seo, Seong-Mun;Jo, Chang-Yong;Kim, Ju-Ryang;Choe, Seung-Ju
Korean Journal of Materials Research
/
v.9
no.8
/
pp.843-848
/
1999
The efect of A1 addition and sintering condition on mutization behavior between alumina and silica in alumina-based shell mold was investigated. A1 addition and high sintering temperature increased the degree of mullitization between alumina/silica but decreased the room temperature strentgh of the shell molds. It was identified that the sintered strength of the shell molds was in range of 2.0~2.6kg/$\textrm{mm}^2$. Al addition suppressed deflection of the shell molds at high temperature. Especially, no deflection was observed in the specimen which was sintered at $1000^{\circ}C$ for 1hr with 2.5wt% Al. The specimen sintered at $1500^{\circ}C$ for 4hrs with no Al addition also displayed no deflection.
$SrAl_2O_4$:$Eu^{2+}, Dy^{3+}$ 축광성 형광체의 합성에 있어서 $B_2O_3$는 일반적으로 고상반응의 촉진을 위한 플럭스로서 첨가된다. 본 연구에서는 플럭스로 첨가되는 $B_2O_3$가 $SrAl_2O_4$:$Eu^{2+}, Dy^{3+}$ 형광체의 결정구조 및 잔광 특성에 미치는 영향을 조사하였다. 합성된 $SrAl_2O_4$:$Eu^{2+}, Dy^{3+}$ 형광체는 520nm에서 최대 피크를 갖는 폭넓은 발광 스펙트럼을 나타내었고, $B_2O_3$ 첨가량의 5wt%일 때 최대값을 나타내었다. $B_2O_3$의 첨가에 의해 $SrAl_2O_4$:$Eu^{2+}, Dy^{3+}$ 결정 내부에는 균일 변형(uniform strain)이 발생하였고 이 결과로 결정격자의 a축과 c축의 길이 및 $\beta$각이 감소하여다. 그리고 $SrAl_2O_4$ 결정내부의 균일 변형은 $Eu^{2+}$이온의 여기과정에서 발생하는 정공(hole)의 포획 사이트인 음이온 결함(negative defect)을 다량 발생시키는 원인이 되고, 결과적으로 $SrAl_2O_4$:$Eu^{2+}, Dy^{3+}$ 결정의 잔광 특성을 향상시키는 것으로 생각되었다.
Journal of the Korea Academia-Industrial cooperation Society
/
v.20
no.11
/
pp.537-543
/
2019
Alumina(Al2O3) is a ceramic material used in industry with a range of particle sizes and characteristics. In this study, a boehmite sol was prepared by a hydrolysis and peptizing process using the Sol-Gel method from aluminum isopropoxide (AIP). γ-Al2O3 was prepared by drying and calcining. To prevent particle agglomeration during the manufacturing process, four kinds of polyvinyl alcohol (PVA) with molecular weights of 9,000~10,000, 31,000~50,000, 89,000~98,000, and 130,000 were added and three concentrations of HNO3 (0.1, 0.3, 0.5 molar ratio) were added to determine their effects on the particles. The crystal structure, composition, particle size and shape of the prepared γ-Al2O3 were confirmed through x-ray diffraction (XRD), x-ray fluorescence analyzer (XRF), particle size analyzer (PSA), and field emission scanning electron microscopy (FE-SEM). As a result, γ-Al2O3 with a purity of approximately 98.2% was synthesized, and the particle size decreased and the uniformity increased with increasing ratio of HNO3 addition and PVA molecular weight. From these results, the particle size can be controlled during the manufacturing process of γ-Al2O3 by controlling the addition ratio of PVA and HNO3.
Fracture behavior and martensite substructure of Ni-36.5at.%Al alloy were investigated with the addition of vanadium which is known as scavenging element of grain boundary. The fracture surfaces were examined by scanning electron microscopy and the EDX spectrometer was applied for composition analysis of fracture surfaces. The substructure of martensite was studied by transmission electron microscopy. By addition of vanadium, fracture surfaces show mixed modes of intergranular and transgranular fracture and more Al content is found on the grain boundaries. For Ni-36.5at.%Al alloy, the planar faults observed in the martensite plates are the internal twins. By increasing the vanadium content, the modulated structure with stacking faults and dislocations dominates while the twinned martensite disappears. The stacking fault is determined to be extrinsic due to the substitution of V for Al. It is concluded that the segregation of sulfur on the high-energy state stacking fault area suppresses the intergranular fracture.
The Co and Ni catalysts supported on $Al_2O_3$ for partial oxidation of methane producing hydrogen were synthesized using impregnation to incipient wetness. And the promotion effects of metals such as Mg, Ce, La and Sr in partial oxidation of methane over these $Co/Al_2O_3$ and $Ni/Al_2O_3$ were investigated. Reaction activity of these catalysts for the partial oxidation of methane was investigated in the temperature range of 450~$650^{\circ}C$ at 1 atm and $CH_2/O_2$ = 2.0. The catalysts were characterized by BET, XRD and SEM/EDX. The results indicated that the catalytic performance of these catalysts was improved with the addition of 0.2 wt% metal promoter. The Mg promoted $Co/Al_2O_3$ catalyst showed the highest $CH_4$ conversion and hydrogen selectivity at higher temperature than $500^{\circ}C$. The Ce and Sr promoted Ni catalysts superior to Co-based catalysts in the low temperature range. The addition of metal promoter to $Co/Al_2O_3$ and $Ni/Al_2O_3$ catalysts increased the surface area.
AI, AIN and additives such as Li$_2$CO$_3$, Y$_2$O$_3$ and CaCO$_3$ which promoted nitridation were mixed, formed and heat-treated in nitrogen atmosphere. The effect of solvent, additive and temperature on nitridation of AI-AIN system was studied. When ethanol containing 1 wt% oleic acid was used as a mixing solvent, the formation of oxide was minimized due to surface modification of AI and AIN particles. The addition of Li$_2$CO$_3$ or CaCO$_3$ as an additive extremely diminished the formation of oxide which formed during heat treatment for nitridation compared with the addition of Y$_2$O$_3$.
Proceedings of the Korean Vacuum Society Conference
/
2012.02a
/
pp.396-396
/
2012
산업 분야에서 TiN, CrN, CrAl-N, TiAl-N과 같은 Hard 코팅들은 기계적 특성이 우수하여 절삭 공구, 기계 부품분야에서 많이 사용되고 있다. 최근 연구 동향을 살펴보면 기존에 하나 또는 두가지 합금상태의 Hard 코팅을 넘어서 제3원소, 제4원소를 첨가하여 미세 구조적 변화를 통해 기존의 우수한 특성에 고온안정성, 내식성, 내산화성 등 다양한 기능성을 부여하는 다기능성 연구가 활발히 진행 중이다. 본 연구에서는 마그네트론 스퍼터를 이용하여 고경도 코팅인 Ti-Al계열에 Si, Cu, Cr, B을 첨가함에 따른 내식특성을 확인해보았다. 성분이 균일한 코팅을 만들기 위해 Ti-Al, Ti-Al-Si, Ti-Al-Cu, Ti-Al-Cr, Ti-Al-B 단일합금타겟을 제조하여 실험을 진행하였다. 기본 물성을 확인하기 위해 경도 측정과 SEM XRD 등을 분석하였다. 내식성 평가는 동전위 테스트와 염수분무 테스트를 진행하였고 전해질은 염수와 동일한 5%-NaCl로 진행하였다. 그 결과 Ti-Al-Cr이 내식성에 강한 것으로 나타났고 염수분무 실험에서도 1200시간 이상 지속되는 성과를 보였다.
To improve the ductility of $Al_3Hf$ and $Al_3Ta$ intermetallic compounds, which are the potential temperature structural materials, the mechanical alloying behaviour and the effect of ternary additions on the $Ll_2$ phase formation were investigated. During the mechanical alloying by the SPEX mill, the $Ll_2$$Al_3Hf$ intermetallic compound was formed after 6 hours of milling in AL-25%Hf system. In AL-25%Ta system, however, only the $D0_{22}$$Al_3Ta$ intermetallic compound was formed until 30 hours of milling and the $Ll_2$ phase was not observed. In AL-12.5%M-25%Ta(M=Cu, Zn, Mn, Fe, Ni) systems, the additions of Cu and Zn had no effect on the $D0_{22}$ structure of the binary $Al_3Hf$ and the additions of Mn, Fe and Ni produced the amorphous phase. Therefore it was considered that these ternary additions could not overcome the energy difference between $Ll_2$ and $D0_{22}$ structures in the $Al_3Hf$ intermetallic compound. In AL-12.5%M-25%Hf(M=Cu, Zn, Mn, Fe, Ni)systems, the additions of Cu and Zn did not affect the $Ll_2$ structure of the binary $Al_3Hf$ but the additions of oMn, Fe and Ni produced the amorphous phase as they did in AL-12.5%M-25%Ta systems. Therefore, it was considered that the Ni, Mn and Fe additions promote the formation of amorphous phase in $Al_3X$ intermetallic compounds.
Proceedings of the Korean Vacuum Society Conference
/
1999.07a
/
pp.246-246
/
1999
TFT-LCD 제조공정의 발전에 따라, 박막층(a-Si, SiNx, gate 전극, ITO 등)에 대한 습식공정을 대치하는 건식식각이 선호되고 있다. scan signal의 전파지연시간을 단축시키는 장점을 갖는 Al gate 전극의 건식식각의 경우, 높은 식각속도와 slope angle의 조절, 그리고 식각균일도가 요구된다. 이러한 Al gate 전극물질로는 Al에 Ti이나 Nd와 같은 금속을 첨가하여 post annealing 동안에 발생하는 hillock을 방지하고 더불어 낮은 resistivity(<10$\mu$$\Omega$cm)와 열과 부식에 대한 높은 저항성을 얻을 수 있다. 그러나 Al-Nd alloy 박막은 식각속도와 photoresist에 대한 식각선택도가 낮아 문제로 지적되고 있다. 본 실험에서는 고밀도 플라즈마원의 일종인 자화된 고밀도 유도결합형 플라즈마를 이용하여 식각가스 조합, inductive power, bias voltage 그리고 공정압력 등의 다양한 공정변수에 따른 Al-Nd film의 기본적인 식각특성 변화를 관찰하였다. 식각시 chloring gas를 주요 식각가스로 사용하고 BCl, HBr 등을 10mTorr의 일정한 압력을 유지하는 조건하에서 첨가하였으며 inductive power는 5100W~800W, bias voltage는 -50V~-200V까지 변화를 주었다. 식각공정의 전후를 통하여 Al-Nd 박막표면의 조성변화를 관찰하기 위하여 X-ray photoelectron spectroscopy(XPS)를 이용하였으며 공정변수에 따른 식각후 profile 관찰은 scanning electron microscopy(SEM)을 통하여 관찰하였다. Al-Nd 식각속도는 100% Cl2 플라즈마에 비해 BCl3의 양이 증가할수록 증가하였으며 75%의 BCl3 gas를 첨가하였을 때 가장 높은 식각속도를 얻을 수 있었다. 또한 SEM을 이용한 표면분석으로 roughness가 감소된 공정조건을 찾을 수 있었다.
For melt-spun Fe-Nd-C alloy variation of phase development and magnetic properties with the variety of small Al addition was investigated. As the amount of Al addition increased the amorphization of Fe$_{14}$/Nd$_{2}$/C or $\alpha$-Fe was retarded and the residual Fe$_{14}$/Nd$_{2}$/C or $\alpha$-Fe did not eliminated after heat treatment resulting in poor coercivities of the ribbons. The grain size of Fe$_{14}$/Nd$_{2}$/C increased with the increase of Al addition and the abnormal grain was often found out in the ribbon heat treated for more then 10 min. The enhancement of coercivity was the highest with the addition of 0.5at%Al. As the amount of Al addition increase the coercivities dropped rapidly. The highest coercivity obtained so far is 13.9kOe which about 16% higher than that(11.2kOe) obtained from the Al-free specimen.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.