• International Journal of Computer Science & Network Security
• /
• v.23 no.12
• /
• pp.115-122
• /
• 2023

Makkah Al-Mukarramah is the capital of Islamic world. It receives special attention from the Saudi government's rulers to transform it into a smart city for the benefit of millions of pilgrims. One of the 2030 vision objectives is to transform specific cities to smart ones with advanced technological facilitation, Makkah is one of these cities. The history of Makkah is not well known for some Muslims. As a result, we built the concepts of our application "Ain Makkah" to enable visitors of Makkah to know the history of Makkah by using technology. In particular "Ain Makkah" uses Augmented Reality to view the history of Al-Kaaba. A 3D model will overlay Al-Kaaba to show it in the last years. Our project will use Augmented Reality to build a 3D model to overlay Al-Kaaba. Future work will expand the number of historical landmarks of Makkah.

• Journal of the Korean Society for Heat Treatment
• /
• v.37 no.5
• /
• pp.221-227
• /
• 2024

The damping capacities in the strain-amplitude dependent and strain-amplitude independent regions were comparatively investigated for pure Mg and Mg-X%Al solid solutions (X : 1, 2 at%) to clarify the role of Al solute in the damping properties of Mg-Al binary solid solution. In order to rule out the effect of grain size on damping capacity, grain sizes of the samples were adjusted to an almost similar level by changing the heat-treatment or solution treatment times at 683 K (12 h, 24 h and 32 h for pure Mg, Mg-1%Al and Mg-2%Al alloys, respectively). The damping capacities of the heat-treated pure Mg and Mg-X%Al solid solutions exhibited a decreasing tendency with an increase in Al concentration both in the strain-amplitude dependent and strain-amplitude independent regions. The observed damping trends depending on strain-amplitude were analyzed and discussed in association with decreasing length between weak pinning points (Al solutes) in Granato-Lücke model.

• Journal of the Korean Ceramic Society
• /
• v.39 no.3
• /
• pp.315-320
• /
• 2002

Treatment effects of dilute hydrofluoric acid (6 wt% HF) on the surface properties of $Al(OH)_3$ were investigated at the molar ratio of F/Al(fluoride/aluminum)=0.15. Temperature and pH variations in the reaction system were recorded to analyze reaction mechanism between $Al(OH)_3$ and aqueous Hf. The reaction of HF to the surface of $Al(OH)_3$ accompanied with a quantity of heat evolution, resulting in increasing temperature of a reactionsystem. And also the reaction was proceeded as transitional state which metastable ${\alpha}-form\;AlF_3{\cdot}3H_2O$ was transferred to insoluble ${\beta}$-form. The resulting ${\beta}-form\;AlF_3{\cdot}3H_2O$ formed by a surface treatment was identified by FT-IR and X-ray diffractormetry. The formation of ${\beta}$-form aluminum fluoride hydrates with diameter less than $1{\mu}m$ on the surface of $Al(OH)_3$ could be visulaized by SEM imgae, making up a coating layer as precipitate-like. The surface whiteness of $Al(OH)_3$ treated with aqueous HF was furthermore increased approximately 6.6% due to the formation of surface hydrates.

• Economic and Environmental Geology
• /
• v.45 no.2
• /
• pp.89-104
• /
• 2012

The solubility of aluminum for two Andisol profiles formed on pyroclastic materials and basaltic rocks from Jeju Island, Korea was investigated. It is found that high organic carbon content and $Al_{pyrophosphate}/Al_{oxalate}$ ratios in the A horizons, suggesting the substantial amounts of reactive Al are associated with organic matter, whereas the low organic carbon content and the $Al_{pyrophosphate}/Al_{oxalate}$ ratios in the Bo horizons indicate that a major part of the reactive Al should be bound inorganically. The differential FT-IR spectra following acid-oxalate dissolution and heating up to 150 and $350^{\circ}C$, and transmission electron microscope (TEM) observation confirm that imogolite is in the Bo horizon. Our results of equilibration experiments demonstrate that the Al solubility in the Bo horizon for Andisols can be clarified by the congruent dissolution model for imogolite-type material (ITM), rather than by the simultaneous equilibrium with both ITM and Al hydroxy-interlayered aluminosilicate. With results from dialysis and aging procedures, it is noted that the formation of a proto imogolite sol showing its transformation to imogolite, which supports the congruent dissolution of ITM primarily controlling the Al solubility of Andisols in Jeju Island, Korea.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.3 s.36
• /
• pp.259-265
• /
• 2005

Characteristics of electroplated Ni films and $Ni-Al_2O_3$ composite films, such as yield strength, fracture elongation, and $Al_2O_3$ content, were evaluated as a function of electroplating current density. $Al_2O_3$ content was $11.48\~11.64\;vol\%$ for $Ni-Al_2O_3$ composite films electroplated at $5\~20\;mA/cm^2$, and decreased to $8.41\;vol\%$ at $30\;mA/cm^2$ $Ni-Al_2O_3$ possessed yield strengths higher than those of Ni films. Especially, $Ni-Al_2O_3$ fabricated at $5\;mA/cm^2$ exhibited $50\%$ improved yield strength. Fracture elongations of Ni and $Ni-Al_2O_3$ decreased with increasing the electroplating current density. $Ni-Al_2O_3$ electroplated at $5\;mA/cm^2$ exhibited more uniform dispersion of $Al_2O_3$ and higher yield strength and larger fracture elongation than the composite films processed at other current densities.

• Korean Journal of Food Science and Technology
• /
• v.28 no.5
• /
• pp.801-805
• /
• 1996

This study was performed to investigate the effect of serum enzyme activities in rats after administration of aluminum compound. Seventy five male Sprague-Dawley rats were divided into five groups consisting of control, $250\;ppm\;AlCl_3,\;500\;ppm\;AlCl_3,\;250\;ppm\;Al_2(SO_4)_3$ and $500ppm Al_2(SO_4)_3$ groups and kept on the diet for 2 weeks. The weight gain increased from 0.53 to 3.35% in $AlCl_3$ adiministration groups but decreased from 2.82 to 6.16% in $Al_2(SO_4)_3$, administration groups as compared to control group. As compared to control group, activities of lactate dehydrogenase (LDH) and aspartate amino transaminase (AST) in serum increased 29.43 to 57.68% and 0.68 to 9.97% in $AlCl_3$ adiministration groups, and 74.60 to 29.33% and 21.04 to 24.79% in $Al_2(SO_4)_3$ adiministration groups, respectively. However, alanine amino transminase (ALT) decreased from 12.69 to 25.42% in $AlCl_3$ adiministration groups and from 24.32 to 39.62% in $Al_2(SO_4)_3$ administration groups. Cholinesterase activity increased from 28.98 to 12.73% as compared to control group by administration of $AlCl_3$ and decreased from 3.93 to 14.48% by administration of $Al_2(SO_4)_3$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.6
• /
• pp.282-288
• /
• 2017

In this paper, GaAs/AlGaAs multi-layer structure was grown by liquid phase epitaxy with graphite sliding boat, which can be used as a device structure of a photocathode image sensor. The multi-layer structure was grown on an n-type GaAs substrate in the sequence as follows: GaAs buffer layer, Zn-doped p-type AlGaAs layer as etching stop layer, Zn-doped p-type GaAs layer, and Zn-doped p-type AlGaAs layer. The Characteristics of GaAs/AlGaAs structures were analyzed by using scanning electron microscope (SEM), secondary ion mass spectrometer (SIMS) and hall measurement. The SEM images shows that the p-AlGaAs/p-GaAs/p-AlGaAs multi-layer structure was grown with a mirror-like surface on a whole ($1.25mm{\times}25mm$) substrate. The Al composition in the AlGaAs layer was approximately 80 %. Also, it was confirmed that the free carrier concentration in the p-GaAs layer can be adjusted to the range of $8{\times}10^{18}/cm^2$ by hall measurement. In the result, it is expected that the p-AlGaAs/p-GaAs/p-AlGaAs multi-layer structure grown by the LPE can be used as a device structure of a photoelectric cathode image sensor.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.1
• /
• pp.7-12
• /
• 2017

3YSZ + (x) $Al_2O_3$ composites (x = 20, 40, 60, 80 wt%) were fabricated and the influences of particle sizes of $Al_2O_3$ on their microstructures and mechanical properties were investigated with XRD, SEM, vickers hardness and fracture toughness. $Al_2O_3$-3YSZ composites containing $Al_2O_3$ powder of a $0.3{\mu}m$ and an $1.0{\mu}m$, which are here in after named as $Al_2O_3$($0.3{\mu}m$)-3YSZ and $Al_2O_3$($1.0{\mu}m$)-3YSZ, respectively, were made by mixing raw materials, uni-axial pressing and sintering at $1,400^{\circ}C$, $1,500^{\circ}C$, and $1,600^{\circ}C$. $Al_2O_3$($0.3{\mu}m$)-3YSZ composites show the higher density and the better mechanical properties than $Al_2O_3$($1.0{\mu}m$)-3YSZ composites. The Vickers hardness of the $Al_2O_3$($0.3{\mu}m$)-3YSZ composites show a peak value of 1,997 Hv at the content of 60 wt% $Al_2O_3$, which is a slightly higher value in comparison with 1,938 Hv of the $Al_2O_3$($1.0{\mu}m$)-3YSZ composite. However, the fracture toughness of $Al_2O_3$-3YSZ composites monotonically increases with decreasing the content of $Al_2O_3$ without any peak values. $Al_2O_3$($0.3{\mu}m$)-3YSZ and $Al_2O_3$($1.0{\mu}m$)-3YSZ composites sintered at $1,600^{\circ}C$ have a maximum value of a $6.9MPa{\cdot}m^{1/2}$ and a $6.2MPa{\cdot}m^{1/2}$, respectively at the composition of containing 20 wt% $Al_2O_3$. It should be noticed that the mechanical properties and the sintering density of the $Al_2O_3$-3YSZ composites can be enhanced by using more fine $Al_2O_3$ powder due to their denser microstructure and smaller grain size.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.4
• /
• pp.401-408
• /
• 1985

The yeast cell wall lytic action of the alkaline AL-protease, which was found out of the crude Zymolyase that a kind of yeast cell wall lytic $endo-{\beta}-1$, 3-glucanase produced from Arthrobacter luteus, was investigated with the viable cells of S. sake and it's cell wall preparation. AL-protease on the lysis of the viable yeast cells showed very low activities with the alone, but the lytic activities were highly increased with the combination of AL-protease and Zymolyase. On the stepwise treatment of the viable yeast cells with AL-protease and Zymolyase, the cells were lysed highly only by the course having a treatment with Zymolyase after pretreatment with AL-protease. Thus synergistic action of AL-protease was not observed with any some commercial enzymes, known as a type of alkaline and serine protease such as AL-protease, and was also found to be affected greatly by the culture conditions and species of the yeast tested. AL-protease caused the release of some peptide and a lot of sugar from the cell wall preparation, but could not lysed the cell wall more than 66%. Whereas Zymolyase could lysed the cell walls almost completely with alone. On the basis of these results, the synergistic action of AL-protease on the lysis of S. sake cells is hypothesized that at first AL-protease bind to the yeast cell surface layer consisting of mannan and protein, and then changes their conformation to facilitate the penetration of Zymolyase from the outside to the inside framework layer constituted of alkali insoluble ${\beta}-1,\;3-glucan$.

• Journal of the Korean Ceramic Society
• /
• v.39 no.4
• /
• pp.413-419
• /
• 2002

Particulate composites of $Al_2O_3$/TiC/SiC, $Al_2O_3$/TiC and $Al_2O_3$/SiC have been fabricated by hot pressing and their R-curve behaviors and mechanical properties were investigated. $Al_2O_3$ containing 30 vol% TiC particles showed higher toughness by 8% than that for monolithic alumina and its fracture strength was increased significantly by approximately 30%. On the other hand, the addition of 30 vol% SiC of $3{\mu}m$ in $Al_2O_3$ decreased the fracture strength slightly but induced a rising R-curve behavior owing to the strong crack bridging of SiC particles. In case of $Al_2O_3$/TiC/SiC, arising R-curve behavior was also observed and the fracture toughness reached 6.6 MPa${\cdot}\sqrt{m}$ at the crack length of $1000{\mu}m$, which was lower than that of $Al_2O_3$/SiC, however, while the fracture strength was higher by about 20%. The fracture toughness seemed to be decreased as smaller TiC particles roughened the SiC interface and pullout of the SiC particles for crack bridging became less active.