• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.551-552
• /
• 2006

The miniature fuel cells have emerged as a promising power source for applications such as cellular phones, small digital devices, and autonomous sensors to embedded monitors or to micro-electro mechanical system (MEMS) devices. Several chemicals run candidate at a fuel in those systems, such as hydrogen. methanol, ethanol, acetic acid, and di-methyl ether (DME). Among them, hydrogen shows most efficient fuel performance. However, there are some difficulties in practical application for portable power sources. Therefore, more recently, there have been many efforts for development of micro-reformer to operate highly efficient micro fuel cells with liquid fuels such as methanol, ethanol, and DME In our experiments, we have integrated a micro-fuel processor system using low temperature co-fired ceramics (LTCC) materials. Our integrated micro-fuel processor system is containing embedded heaters, cavities, and 3D structures of micro- channels within LTCC layers for embedding catalysts (cf. Figs. 1 and 2). In the micro-channels of LTCC, we have loaded $CuO/ZnO/Al_2O_3$ catalysts using several different coating methods such as powder packing or spraying, dipping, and washing of catalyst slurry.

• 한국지반환경공학회 논문집
• /
• 제25권5호
• /
• pp.29-37
• /
• 2024

본 연구는 산화칼슘 개질제로 제강슬래그를 사용하여 연약점토와 혼합 시 발생하는 화학적 성분의 변화가 수경성 및 양생시간에 따른 압축강도 발현 특성을 파악하고자 XRF시험과 SEM 촬영, 베인전단강도, 일축압축강도시험을 수행하였다. 제강슬래그로부터 용출되는 칼슘(Ca)은 점토 내 Ca 함량을 증가시키고, SiO₂ 및 Al₂O₃ 성분과의 화학적 반응으로 칼슘실리카게이트 수화물 (CaO-SiO₂-H₂O) 반응으로 점토의 피막층이 형성되어 결정체 입자수를 증가시킨다. 따라서, 중량혼합비 Rss 30%(제강슬래그 30% + 점토 70%) 상태에서 초기 비활성영역의 베인전단강도는 4.4~18.4kN/m²로 나타났다. 활성영역의 경우 양생시간 480시간 경과 시 최대일축압축강도는 431.8kN/m²까지 증가되었으며, 이는 포졸란 반응에 의해 점토의 겉보기 점착(Attraction) 강도를 증가시킨다. 본 연구를 통해 토목현장에서 제강슬래그의 재활용을 위해 연약점토와 혼합 시 제강슬래그의 혼합율(Rss)에 따라 연약점토는 강도발현이 되므로 활용성을 높일 수 있다.

• 한국환경보건학회지
• /
• 제42권1호
• /
• pp.27-33
• /
• 2016

Objectives: Alumina nanoparticles ($Al_2O_3$, Al-NPs) are used for various purposes, including as coating agents and paint additives. Their potential toxicity has raised concern for human health. This study focuses on exploring the toxic effects on the brain and kidneys caused by Al-NPs exposure in rats. Methods: The animals were orally administered Al-NPs at 10, 50 and 100 mg/kg body weight for 28 days following OECD TG 407. To determine the targeted toxicity of Al-NPs, histopathological examination and gene expression analysis were conducted on the rats. Results: The Al-NPs treatment induced kidney tubular dilatation. In the rat cerebrums, the expression levels of 126 genes experienced two-fold or greater increases in response to Al-NPs, including other genes encoding proteins involved in cell differentiation, transcription and signal transduction. In the rat kidneys, the expression levels of 152 genes also showed two-fold or greater increases in response to Al-NPs, including other genes encoding proteins involved in apoptosis, transcription and signal transduction. Conclusion: These results suggest that exposure to Al-NPs influences cellular signal pathways of kidney and cerebrum, and it can be a toxic indicators of nanometrials.

• 한국재료학회지
• /
• 제28권3호
• /
• pp.135-141
• /
• 2018

Stainless steel is being used in various industries such as automobile and aerospace for its cheap manufacturing cost and excellent mechanical properties. However, stainless steel failed to stably protect a specimen with a $Cr_2O_3$ protective layer at temperatures above $1000^{\circ}C$. Thus, improving the high temperature flame resistance of the specimen through additional surface coating was needed. In this study, multilayer coatings of YSZ and $Al_2O_3$ were performed on SUS 304 specimens using pack cementation coatings and thermal plasma spray. The multilayer coated specimen showed enhanced thermal properties due to the coated layers. The microstructures and phase stability are discussed together with flame conditions at $1350^{\circ}C$.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.58-63
• /
• 2014

This paper deals with the effects of counterpart materials on the wear behavior of thermally sprayed STS316 coatings. STS316 powders were flame-sprayed onto a carbon steel substrate. Dry sliding wear tests were performed using the applied loads of 15 N. AISI52100, $Al_2O_3$, $ZrO_2$ and $Si_3N_4$ balls were used as counterpart materials. Wear behavior of STS316 coatings against different counterpart materials were studied using a scanning electron microscope(SEM) and energy dispersive X-ray spectroscopy (EDS). The results show that the wear behavior of thermally sprayed STS316 coatings strongly depends on the type of counterpart material. Dominant wear mechanism was similar for all studied materials as failure of adhesion film except for Si3N4 used as counterpart material. In the case of Si3N4 used as counterpart material, dominant wear mechanism was abrasion.

• Progress in Superconductivity
• /
• 제7권2호
• /
• pp.152-157
• /
• 2006

New precursor solution with dichloroacetic acid (DCA) was developed for fabricating high $J_c$ REBCO film. DCA based-precursor solution was coated on $LaAlO_3$(001) substrate by dip coating method. Processing parameters such as oxygen partial pressure, water vapor, ramping rate and pyrolysis temperature were controlled in order to obtain a good epitaxial film. The film with thickness of 0.5 micrometer was obtained by single coating and no crack was observed at calcined films. Oxygen partial pressure was controlled in the range of $100{\sim}1,000$ ppm and conversion heat treatment was carried out at the temperature range of $705-765^{\circ}C$. A critical transition temperature ($T_c$) of 90 K and a critical transport current density ($J_c$) of $>0.5\;MA/cm^2$ (77 K and self-field) were obtained for the GdBCO film. It is thought that fluorine-free MOD solution using DCA is promising precursor solution for fabricating high quality REBCO films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 광주전남지부
• /
• pp.107-108
• /
• 2006

High $J_c$ $YBa_2Cu_3O_x$, superconducting films were fabricated by MOD method using fluorine-free dichloroacetic acid(DCA) as chelating solvent for preparing precursor solution. DCA-MOD precursor solution was coated on a single crystal (001) $LaAlO_3$(LAO) substrate by a dip coating method with a speed of 25 mm/min. Coated films were calcined at lower temperature up to $500^{\circ}C$ and Conversion heat treatment was performed at various temperatures of $780{\sim}810^{\circ}C$. SEM observations showed that films have very dense microstructures for the films prepared at the temperature higher than $800^{\circ}C$ regardless of diluting solvent; methanol or 2-methoxyethanol. A High critical current density ($J_c$) of 1.28 $MA/cm^2$ (@77 K and self-field) was obtained for the YBCO film prepared using 2-methoxyethanol as a solvent.

• 한국산업융합학회 논문집
• /
• 제20권2호
• /
• pp.149-155
• /
• 2017

Mechanical properties of carbon coated $SiC_f/SiC$ composites have been investigated, in conjunction with a detailed analysis of microstructure. Especially, the fracture behavior of $SiC_f/SiC$ composites by the induction of carbon coating layers has been examined. The matrix region of $SiC_f/SiC$ composites with ultra-fine SiC powders were consolidated by a liquid phase sintering (LPS) process, using a sintering additive of $Al_2O_3-Y_2O_3$ powder compound. In this composite, plain and satin- woven Tyranno SA fabrics were also utilized as a reinforcing material. A carbon interfacial layer was coated around satin-woven SiC fabrics. The characterization of LPS-$SiC_f/SiC$ composites was investigated by means of SEM and three point bending test.

• 청정기술
• /
• 제28권3호
• /
• pp.218-226
• /
• 2022

최근 선진국들은 수소경제 및 탄소중립 사회로의 전환을 위해 수소에너지의 수요가 급격히 증가하고 있으며, 이산화탄소(CO₂)를 배출이 없는 친환경적인 수소(H₂) 생산 기술에 대한 관심이 높아지고 있다. 본 연구에서는 암모니아(NH₃) 분해 수소 제조를 위해 루테늄 알루미나(Ru/Al₂O₃) 분말 촉매와 함께 알루미나 졸(alumina sol)의 무기바인더(inorganic binder)와 메틸 셀룰로오스(methyl cellulose)의 유기바인더(organic binder)를 사용하여 딥 코팅(dip coating) 방법으로 루테늄 알루미나 메탈 모노리스 코팅 촉매를 제조하였다. 딥 코팅을 위한 촉매 슬러리의 최적 비율로 촉매와 무기바인더의 중량 비율을 1:1로 고정하여 유기바인더 0.1일 때 1회 딥 코팅 시 촉매 코팅양은 61.6 g L^-1이다. 이때 메탈모노리스 표면에 코팅된 촉매 층의 균일한 두께 (약 42 ㎛)와 결정상을 주사전자현미경(Scanning Electron Microscope, SEM)과 X-ray 회절분석(X ray diffraction, XRD)을 통해 확인하였다. 또한, 암모니아 분해 수소 제조의 최적 공정조건을 찾고자 반응표면분석법(Response Surface Method, RSM)을 이용하여 반응온도와 공간속도의 독립변수에 따른 암모니아 전환율에 대한 수치 최적화 회귀식 모델을 계산하였다. 이러한 결과로부터 암모니아 분해 수소생산을 위한 상업적 규모의 공정운전 기본설계 자료로 활용이 가능하다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.29-29
• /
• 2010

Engineering plastics have excellent electrical properties, mechanical strength and various characteristic which include chemical resistance, environmental resistance, weatherability at a wide temperature range. It has good characteristic(light weight, good productivity) as compare with epoxy or porcelain insulators. However, engineering plastics not suited to outdoor insulator because it isn't hydrophobic. Therefore, to over come these critical problems, we improve the surface insulation characteristics of engineering plastic by coating micro-, nano- size inorganic fillers added to RTV-SIR(Room temperature vulcanized-silicone rubber) at this plastic surface. The effect is analyzed through salt-fog test, tracking test. In conclusion, the engineering plastic coated RTV with micro-$Al_2O_3$20[phr], nano-Al(OH)3 1 ~ 3[phr] improved much better than the others.