• Structural Engineering and Mechanics
• /
• 제49권1호
• /
• pp.23-40
• /
• 2014

In this article, using finite element method of analysis (FEM), behavior of the endplate moment connection subjected to axial force and bending moment is investigated. In the FEM model, all the nonlinear characteristics such as material, geometry, as well as contact have been included. First, in order to verify the numerical model of the connection, an analysis of the endplate moment connection conducted without the application of the axial force. Results obtained from FEM indicating a close and good correlation with the experimental results. Then to investigate the influence of the axial forces, the connections subjected to axial forces as well as the bending moment are analyzed. To observe the overall effect of these actions, the momentaxial force interaction diagrams are drawn. It is observed that the presence of axial force even in a small value can change the behavior of the connection significantly. It is also shown that the axial forces can alter the failure mode of the connection; and therefore it could result in a different than the predicted moment capacity of the connection.

• Computers and Concrete
• /
• 제14권2호
• /
• pp.175-191
• /
• 2014

In recent years, the emergence of nanotechnology and nanomaterial has created hopes to improve various properties of concrete. Nano silica as one of these materials has been introduced as a cement replacement material for concrete mixture in construction applications. It can modify the properties of concrete, due to high pozzolanic reactions and also making a denser microstructure. On the other hand, it is well recognized that the use of mineral admixtures such as silica fume affects the mechanical properties and durability of cementitious materials. In addition, the superior performance of self-consolidating concrete (SCC) and self-consolidating mortars (SCM) over conventional concrete is generally related to their ingredients. This study investigates the effect of nano silica and silica fume on the compressive strength and chloride permeability of self-consolidating mortars. Tests include compressive strength, rapid chloride permeability test, water permeability, capillary water absorption, and surface electrical resistance, which carried out on twenty mortar mixtures containing zero to 6 percent of nano silica and silica fume. Results show that SCMs incorporating nano silica had higher compressive strength at various ages. In addition, results show that nano silica has enhanced the durability SCMs and reduced the chloride permeability.

• Earthquakes and Structures
• /
• 제19권3호
• /
• pp.197-214
• /
• 2020

Diagrid structures have been introduced as a fairly modern lateral load-resisting system in the design of high-rise buildings. In this paper, a novel diagrid system called tube-in-tube diagrid building is introduced and assessed through pushover and incremental dynamic analyses. The main objectives of this paper are to find the optimum angle of interior and exterior diagrid tube and evaluate the efficiency of diagrid core on the probability of collapse comparing to the conventional diagrid system. Finally, the seismic performance factors of the proposed system are validated according to the FEMA P695 methodology. To achieve these, 36-story diagrid buildings with various external and internal diagonal angles are designed and then 3-D nonlinear models of these structures developed in PERFORM-3D. The results show that weight of steel material highly depends on diagonal angle of exterior tube. Adding diagrid core generally increases the over-strength factor and collapse margin ratio of tall diagrid buildings confirming high seismic safety margin for tube-in-tube diagrid buildings under severe excitations. Collapse probabilities of both structural systems under MCE records are less than 10%. Finally, response modification factor of 3.0 and over-strength factor of 2.0 and 2.5 are proposed for design of typical diagrid and tube-in-tube diagrid buildings, respectively.

• Structural Engineering and Mechanics
• /
• 제53권3호
• /
• pp.497-517
• /
• 2015

In this study, nonlocal nonlinear buckling analysis of embedded polymeric temperature-dependent microplates resting on an elastic matrix as orthotropic temperature-dependent elastomeric medium is investigated. The microplate is reinforced by single-walled carbon nanotubes (SWCNTs) in which the equivalent material properties nanocomposite are estimated based on the rule of mixture. For the carbon-nanotube reinforced composite (CNTRC) plate, both cases of uniform distribution (UD) and functionally graded (FG) distribution patterns of SWCNT reinforcements are considered. The small size effects of microplate are considered based on Eringen's nonlocal theory. Based on orthotropic Mindlin plate theory along with von K$\acute{a}$rm$\acute{a}$n geometric nonlinearity and Hamilton's principle, the governing equations are derived. Generalized differential quadrature method (GDQM) is applied for obtaining the buckling load of system. The effects of different parameters such as nonlocal parameters, volume fractions of SWCNTs, distribution type of SWCNTs in polymer, elastomeric medium, aspect ratio, boundary condition, orientation of foundation orthtotropy direction and temperature are considered on the nonlinear buckling of the microplate. Results indicate that CNT distribution close to top and bottom are more efficient than those distributed nearby the mid-plane for increasing the buckling load.

• Structural Engineering and Mechanics
• /
• 제61권2호
• /
• pp.231-244
• /
• 2017

The aim of this study is to develop a semi-analytical method to investigate fluid-structure coupling of concentric double shells with different lengths and elastic behaviours. Co-axial shells constitute a cylindrical circular container and a baffle submerged inside the stored fluid. The container shell is made of functionally graded materials with mechanical properties changing through its thickness continuously. The baffle made of steel is fixed along its top edge and submerged inside fluid such that its lower edge freely moves. The developed approach is verified using a commercial finite element computer code. Although the model is presented for a specific case in the present work, it can be generalized to investigate coupling of shell-plate structures via fluid. It is shown that the coupling between concentric shells occurs only when they vibrate in a same circumferential mode number, n. It is also revealed that the normalized vibration amplitude of the inner shell is about the same as that of the outer shell, for narrower radial gaps. Moreover, the natural frequencies of the fluid-coupled system gradually decrease and converge to the certain values as the gradient index increases.

• Steel and Composite Structures
• /
• 제24권3호
• /
• pp.323-337
• /
• 2017

This paper presents the results of a comprehensive experimental investigation on the compressive behaviour of steel tube-confined concrete (STCC) stub columns with active and passive confinement. To create active confinement in STCC columns, an innovative technique is used in which steel tube is laterally pre-tensioned while the concrete core is simultaneously pre-compressed by applying pressure on fresh concrete. A total of 135 STCC specimens with active and passive confinement are tested under axial compression load and their compressive strength, ultimate strain capacity, axial and lateral stress-strain curves and failure mode are evaluated. The test variables include concrete compressive strength, outer diameter to wall thickness ratio of steel tube and prestressing level. It is shown that applying active confinement on STCC specimens can considerably improve their mechanical properties. However, applying higher prestressing levels and keeping the applied pressure for a long time do not considerably affect the mechanical properties of actively confined specimens. Based on the results of this study, new empirical equations are proposed to estimate the axial strength and ultimate strain capacity of STCC stub columns with active and passive confinement.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권3호
• /
• pp.366-370
• /
• 1999

Samples of whole plant, leaf and stem of Akbar, Neelum, UM-81 and lZ-31 cultivars of maize fodder harvested up to 14 weeks at different growth stages were drawn and analysed for dry matter contents and various cell wall constituents such as NDF, ADF, hemicellulose, cellulose, lignin, cutin and silica. The dry matter contents of whole maize plant, leaf and stem increased significantly (p<0.01) with advancing plant age. Maximum dry matter was found in the leaf fraction of the plant. The cell wall components continued to increase significantly (p<0.001) in whole maize plant and its morphological fractions as the age advanced. Maximum values for NDF, ADF, cellulose and lignin were observed in stem followed by whole plant and leaf, whereas hemicellulose, cutin and silica contents were higher in leaf fraction of the plant. The cultivars were observed to have some effects on chemical composition of all plant fraction. The results indicated that maturity had a much greater effect on the concentration of all the structural components than did the cultivars. It was concluded that maize fodder should be cut preferably between 8th to 9th week of age (flowering stage) to obtain more nutritious and digestible feed for livestock. Among the maize cultivars, Neelum proved to be the best, due to its higher dry matter contents and lower lignin concentration.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권8호
• /
• pp.1228-1233
• /
• 1999

A study was conducted on four maize cultivars to determine the dry matter and fibre digestibility as influenced by advancing plant age. Samples of maize cultivars Akbar, Neelum, UM-81 and IZ-31 were harvested at weekly intervals/ growth stages. The samples of morphological fractions such as leaf and stem were also collected at various growth stages. Whole mixed fodder and different fractions of maize plant were analysed for their chemical composition and in vitro digestibility. The results showed that in vitro dry matter digestibility (IVDMD) of whole maize plant, leaf and stem decreased significantly with advancing stage of maturity. Digestibility of NDF, ADF, hemicellulose and cellulose decreased significantly in all plant parts with advancing plant age/growth stages. Maximum values for the digestibility of dry matter and various cell wall constituents were observed in leaf, followed by whole plant and stem fractions. Cultivars were observed to have significant effect of IVDMD and digestibility of NDF, ADF and cellulose in all plant fractions. The results indicated that digestibility of maize fodder was affected by stage of maturity and cultivars. However, maturity had a greater effect on digestibility in all plant fractions than did cultivars. Dry matter contents were found to be significantly and negatively correlated with IVDMD of whole plant and its leaf and stem fractions. Based on correlations, regression equations were computed to predict IVDMD.

• CELLMED
• /
• 제4권3호
• /
• pp.19.1-19.6
• /
• 2014

The most important reason mentioned for the early discontinuation of breast feeding and introduction of supplementary bottles is Perceived Insufficient Milk (PIM), which is relatively common in women. This is of public health concern because the use of breast milk substitutes increases the risk of morbidity and mortality among infants in developing countries and shortens birth intervals. Thus, a literary search in classical text for aetiopathogenesis, symptoms and treatment of PIM were appraised to implement in contemporary era. The classical Unani texts viz., Al Qanon fit Tib (Canon of Medicine), Al Hawi (Continens Liber), Zakheera Kharzam Shahi, Tarjuma Kamilus Sana, Tibbe Akbar, Akseer Azam, and Kitabul Kulliyat were reviewed. Further certain galactogogue herbs which are in use since antiquity such as fenugreek, cotton seeds, cumin, asparagus, black cumin etc were explored in different search engines on website for proven galactogogue activity. The causes of PIM are abnormal temperament of body or breast, anaemia, anxiety, depression, malnutrition etc. The principle treatment is treating the cause viz., the temperament is corrected by diet and drugs in abnormal temperament, elimination of humour is required in dominance of humour etc. The aforementioned drugs are proven scientifically for their galactogogue activity. The classical texts are having valuable information regarding PIM, which can be implemented in present era. Aforementioned Unani drugs are proven scientifically for with their galactogogue effect, however, clinical trials are scarce. Therefore, further randomized controlled clinical trials are recommended.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권6호
• /
• pp.2669-2673
• /
• 2014

Aim: To evaluate the predominant colorectal polyps in the Almadinah region of Saudi Arabia. Materials and Methods: In this iretrospective study, we analyzed pathology reports of colonoscopies performed in King Fahad Hospital, Madinah, Saudi Arabia during the period 2006 to 2013. Data based on patient age, gender, size, site and type of polyps and the degree of dysplasia were analyzed by software SPSS 17 and compared with other published studies from different geographic regions of the world. Results: During these years, 224 patients had colonic polyps, of whom 149 (66.5%) were men and 75 (33.5%) were women. The most common types of polyps were adenomatous (166), followed by hyperplastic polyps (24), juvenile (18), inflammatory (13), lipomatous (2) and one patient with Peutz-Jegher polyps. Tubulovillous adenoma was the commonest adenomatous polyp (102), followed by tubular (41) and villous (23) types. The sigmoid colon was the most commonly involved region (36.6%). Dysplasia was significantly associated with female patients who had large size tubulovillous polyps located in the left colon. Conclusions: The type and distribution of colorectal polyps in Saudi Arabia is very similar to Western countries. Patient gender, and size, histological type and location of polyps are closely related to dysplastic change in colonic polyps.