• Journal of Aerospace System Engineering
• /
• v.6 no.2
• /
• pp.1-6
• /
• 2012

On this study, as a Human Factor(HF)'s point of view, typical PVI(Pilot Vehicle Interface) evaluation for small airplane cockpit design, PVI evaluation items and procedures to show compliance to KAS Part 23 "Airworthiness Standards : Normal, Utility, Acrobatic, And Commuter Category Airplanes" are introduced and reviewed. This study is based on the experience of Korean small civil airplane development and certification program.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2857-2861
• /
• 2007

Flow and aerodynamic characteristics were analyzed numerically for a commercial passenger airplane, Boeing 747-400, flying in the cruising condition. The model geometry with 100:1 in scale was obtained by the photo scanning measurement with the maximum error of 1.4% comparing with the real airplane dimension. The three-dimensional inviscid steady compressible governing equations were solved by the finite volume method in the unstructured grid system. The convective terms were treated by the Crank-Nicholson and first-order upwind schemes. In the computational results, the strong wing-tip vortices were clearly observed and the pressure contours on the airplane surface were suggested. The lift and drag forces in the wing with engines increase by 1.49% and 3.9%, respectively compared with the case without engines. The aerodynamic forces were estimated quantitatively for each element which consists of the airplane.

• Advances in aircraft and spacecraft science
• /
• v.4 no.4
• /
• pp.371-399
• /
• 2017

The motion of propeller driven airplanes, flying at constant speed on ascending or descending helical trajectories is analyzed. The dynamical abilities of the airplane are shown to result in restrictions on the ranges of the geometrical parameters of the helical path. The physical quantities taken into account are the variation of air density with altitude, the airplane mass change due to fuel consumption, its load factor, its lift coefficient, and the thrust its engine can produce. Formulas are provided for determining all the airplane dynamical parameters on the trajectory. A procedure is proposed for the construction of tables from which the flyability of trajectories at a given angle of inclination and radius can be read, with the corresponding minimum and maximum speeds allowed, the final altitude reached and the amount of fuel burned. Sample calculations are shown for the Cessna 182, a Silver Fox like unmanned aerial vehicle, and the C-130 Hercules.

• 한국항공운항학회:학술대회논문집
• /
• 2015.11a
• /
• pp.88-91
• /
• 2015

MISSING Malaysia Airlines flight MH370 has not been discovered and unknown whether it crashed on the ground or under the sea. There are a couple of emergency equipment in the airplane not only outside of airplane but inside airplane such as ELT(Emergency Locator Transmitter). Since the ELT developed, it is required to be installed in the airplane for regulation requirement. However, despite of its important function, it is not working properly or shows wide search range for rescue during the crash or ditching on the water. I would like to propose how to over come the up-to-dated position data just before the event. Connecting with ADIRS or GPS which is installed internal airplane system will help to reduce the rescue time for survival passenger.

• Journal of Aerospace System Engineering
• /
• v.8 no.3
• /
• pp.20-26
• /
• 2014

This paper presents the procedures and the results of the pitch control force via flight test for a light airplane in order to make out the stability of the aircraft and the compliance with concerned regulation. The flight test procedures were determined in order to obtain the aircraft type certification. The instrumentation equipments including airspeed indicator, accelerometer, and pitch control force measurement tools are used to perform the flight test. For the flight test, the airspeed and the pitch control force with related normal acceleration are measured sustaining turn flight with bank angle derived from trim speed. The flight test results showed that the handling qualities of the airplane are complied with the KAS-23, the regulation of the Korean government for the light airplane type certification.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.11 no.2
• /
• pp.43-58
• /
• 2003

To decide the type of airplane to purchase in air service agencies is a typical matter of multi-criteria decision making process. The selection of airplane type is very important because it has great impact on the budget and management of air service agency, once the decision has been made. AHP is being recognized as one of many effective methods of multi-criteria decision making processes. In this study, checklist for the selecting optimum type of light airplane to be purchased is developed by the AHP.

• Advances in aircraft and spacecraft science
• /
• v.10 no.5
• /
• pp.473-494
• /
• 2023

This article introduces a formalism for the analysis of airplane trajectories on which the motion is determined by specifying the power of the engines. It explains a procedure to solve the equations of motion to obtain the value of the relevant flight parameters. It then enumerates the constraints that the dynamical abilities of the airplane impose on the amount of fuel used, the speed, the load factor, the lift coefficient, the positivity and upper boundedness of the power available. Examples of analysis are provided to illustrate the method proposed, with rectilinear and circular trajectories. Two very different types of airplanes are used in the examples: a Silver Fox-like small UAV and a common Cessna 182 Skylane.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.3
• /
• pp.207-213
• /
• 2005

This paper deals with an autonomous flight guidance and control algorithm design for TR301 tilt-rotor airplane under development by Korea Aerospace Research Institute for simulation purpose. The objective of this study is to design autonomous flight algorithm in which the tilt-rotor airplane should follow the given waypoints precisely. The approach to this objective in this study is that, first of all, model-based inversion is applied to the highly nonlinear tilt-rotor dynamics, where the tilt-rotor airplane is assumed to fly at helicopter flight mode(nacelle angle=0 deg), and then the control algorithm, based on classical control, is designed to satisfy overall system stabilization and precise waypoint following performance. Especially, model uncertainties due to the tiltrotor model itself and inversion process are adaptively compensated in a simple neural network(Sigma-Phi NN) for performance robustness. The designed algorithm is evaluated in the tilt-rotor nonlinear airplane in helicopter flight mode to analyze the following performance for given waypoints. The simulation results show that the waypoint following responses for this algorithm are satisfactory, and control input responses are within control limits without saturation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.7
• /
• pp.552-560
• /
• 2013

Airplane Buhwal is the first light airplane which is designed and made in South Korea. Restoration of airplane Buhwal is designed based on the one made by Korean Airforce in 2004 but there are some changes also. It uses aluminum main wing, electronic indicator, BRS(Ballistic recovery parachute) and black box for improved performance. In this paper, for the restorated Buhwal, major design changes are introduced, structure, aerodynamic and stability analysis are reviewed and improved performances which is proven through flight test are shown. This study will be a big help for domestic light airplane development.

• Advances in aircraft and spacecraft science
• /
• v.4 no.6
• /
• pp.651-677
• /
• 2017

For the past ten years' efforts have been made to introduce environmentally-friendly "green" electric-taxi and maneuvering airplane systems. The stated purpose of e-taxi systems is to reduce the taxiing fuel expenses, expedite pushback procedures, reduce gate congestion, reduce ground crew involvement, and reduce noise and air pollution levels at large airports. Airplane-based autonomous traction electric motors receive power from airplane's APU(s) possibly supplemented by onboard batteries. Using additional battery energy storages ads significant inert weight. Systems utilizing nose-gear traction alone are often traction-limited posing serious dispatch problems that could disrupt airport operations. Existing APU capacities are insufficient to deliver power for tractive taxiing while also providing for power off-takes. In order to perform comparative and objective analysis of taxi tractive requirements a "standard" taxiing cycle has been proposed. An analysis of reasonably expected tractive resistances has to account for steepest taxiway and runway slopes, taxiing into strong headwind, minimum required coasting speeds, and minimum acceptable acceleration requirements due to runway incursions issues. A mathematical model of tractive resistances was developed and was tested using six different production airplanes all at the maximum taxi/ramp weights. The model estimates the tractive force, energy, average and peak power requirements. It has been estimated that required maximum net tractive force should be 10% to 15% of the taxi weight for safe and expeditious airport movements. Hence, airplanes can be dispatched to move independently if the operational tractive taxi coefficient is 0.1 or higher.