• 한국항공운항학회지
• /
• 제10권1호
• /
• pp.57-68
• /
• 2002

The economical aspects should be evaluated to decide the LCC(Life Cycle Cost) of the long life facilities or equipments. Airplane operators evaluate the economical aspects to decide whether they maintain the existing airplane or substitute the new one. This paper presents economic life cycle and economic life cost for both Cessna 172R and Mooney 20J that are operated for flight training in 'H' University. The residual value that is used to calculate the capital recovery rate of the airplane is calculated based on the data from Blue Book published in USA. The annual equivalent on operation cost is calculated based on the 500 flight hours per year which is the annual flight hour for the airplane in 'H' university. This paper showed that economic life cycle of Cessna 172R is nine years since it was introduced in 2001, and Mooney 20J which was introduced in 1991 exceeds the economic life cycle in 2002.

• 대한교통학회지
• /
• 제21권3호
• /
• pp.23-35
• /
• 2003

본 연구는 항공기 운항에 있어 주요 구성원들인 항공정비사와 조종사들 사이에 내재하고 있는 공유가치나, 양자간의 갈등정도, 영향력이 그들간의 신뢰나 업무만족, 운항성과에 어떠한 영향을 미치는지를 살펴보았다. 분석 결과, 항공정비사와 조종사의 공유가치가 높을수록 신뢰가 높아지며 업무만족도 높아졌다. 또한 그들간의 갈등이 적을수록 신뢰가 높아지며, 업무만족이 높아졌다. 항공정비사와 조종사들간의 영향력이 균형을 이룰수록 신뢰수준과 업무만족 또한 높아졌다. 그리고 신뢰수준과 업무만족의 정도에 따라 운항성과도 달라진 것으로 파악되었다. 이상의 연구결과는 상호업무의존성이 많은 운항업무에서 항공정비사와 조종사가 지각하는 상대방에 대한 태도가 운항성과와 관련이 있음을 제시한다.

• 항공우주시스템공학회지
• /
• 제7권3호
• /
• pp.39-44
• /
• 2013

On this study, climb performance related airworthiness requirements for small airplane on KAS Part 23 and flight test techniques for climb performance (Sawtooth climb) are introduced. Also, applicable procedures, test conditions and required test parameters of sawtooth climb flight test techniques are reviewed.

• 한국시뮬레이션학회논문지
• /
• 제12권3호
• /
• pp.1-11
• /
• 2003

The flight simulator should be made like a actual flight. For the scene of sight, instrument should show the condition of flight and the pilot should catch the altitude, speed, pose and rate of lift of the airplane. The paper describes 3D flight visual training program of driving airplane in practice. It is for beginners using joystick in PC, implements airplane physical equations. And it uses rendering technology to implement vision parts of flying object.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2003년도 춘계학술대회논문집
• /
• pp.37-42
• /
• 2003

The flight simulator should be made like a actual flight. For the scene of sight, instrument should show the condition of flight and the pilot should catch the altitude, speed, pose and rate of lift of the airplane. The paper describes 3D flight visual training program of driving airplane in practice. It is for beginners using joystick in PC, implements airplane physical equations. And it uses rendering technology to implement vision parts of flying object.

• 한국항공운항학회지
• /
• 제5권1호
• /
• pp.17-30
• /
• 1997

FAR 23, AC 23-8, 그리고 Order 8110.7을 이용하여 경비행기의 비행 시험 절차에 대한 연구를 수행하였다. 본 연구에서는 창공-91의 비행 시험을 통한 경험을 바탕으로 형식증명을 위한 주요 절차에 대한 연구를 수행하였다. 본 연구는 소형 비행기의 제작자, 항공관련 기술자, 비행 시험 기술자, 비행 시험 조종사, 그리고 관련 정부 관계자들에게 비행 시험에 관련된 기준을 이해하도록 하기 위해 수행된 연구이다. 본 연구에서 비행 시험 방법과 절차는 주로 소형 비행기의 형식증명에 관련된 것으로 관련자들에게 큰 도움이 될 것이다.

• Advances in aircraft and spacecraft science
• /
• 제3권4호
• /
• pp.399-425
• /
• 2016

The dynamical requirements are obtained for airplanes to travel on inclined circular trajectories. Formulas are provided for determining the load factor, the bank angle, the lift coefficient and the thrust or power required for the motion. The dynamical properties of the airplane are taken into account, for both, airplanes with internal combustion engines and propellers, and airplanes with jet engines. A procedure is presented for the construction of tables from which the flyability of trajectories at a given angle of inclination can be read, together with the corresponding minimum and maximum radii allowed. Sample calculations are shown for the Cessna 182, a Silver Fox like unmanned aerial vehicle, and a F-16 jet airplane.

• 한국항공운항학회지
• /
• 제16권3호
• /
• pp.1-6
• /
• 2008

The stalling speed flight test of light airplane, ChangGong-91, was performed to acquire the certification. With power-off engine condition, the wings level stall flight tests were conducted at the aircraft configuration of various flap angle - clean, 20degree, and full flap, respectively. They were performed considering with the combination of the maximum and minimum test weight, and forward and afterward center of gravity. The stalling speeds and the minimum speeds of light airplane were determined from the results of flight test. Also, the appropriateness of stall warning speeds are evaluated through the flight test measures. The airplane is recoverable only with pitch control and engine throttle from stall state without exceptional operation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.891-896
• /
• 2007

This paper contained the flight test calibration for the airspeed indicator and the altimeter of the light airplane ChangGong-91, which is the first type certified aircraft from Korean Ministry of Construction and Transportation, as a part of the flight test validation. The flight test for airspeed position error calibration was performed using tower fly by method in order to calibrate swivel head testboom which is attached to the right wing tip of the airplane, and using system to system method for airspeed indicator. The altimeter calibration was calculated using flight test data for airspeed calibration. The flight test was conducted at the basis of the 'Korean Airworthiness Standard' regulation of Korean Ministry of Construction and Transportation.

• Advances in aircraft and spacecraft science
• /
• 제5권5호
• /
• pp.551-579
• /
• 2018

This work is concerned with the motion of propeller driven airplanes, flying at constant velocity on ascending or descending rectilinear trajectories. Its purpose is to provide important features of rectilinear flights that are required for airplane trajectory planning but that cannot be found already published. It presents a method for calculating the amount of fuel used, the restrictions on the trajectory parameters, as inclination and speed, which result from the load factor, the lift coefficient, the positivity and upper boundedness of the power available. It presents a complete discussion of both ascending and descending flights, including gliding. Some original remarks are made about the parameters of gliding. It shows how to construct tables of parameters allowing to identify rapidly flyable trajectories. Sample calculations are shown for the Cessna 182 and a Silver Fox like unmanned aerial vehicle.