• 제목/요약/키워드: Airflow rate

검색결과 223건 처리시간 0.021초

대평판 글라스 이송용 공기 부상 이송장치의 개발 (Development of the Air Floating Conveyor System for the Large Glass Sheet)

  • 이태걸;유진식;정효재;김종형;김준현
    • 한국생산제조학회지
    • /
    • 제22권4호
    • /
    • pp.635-642
    • /
    • 2013
  • We have prepared a DEMO conveyor device for conveying a large 8G class glass sheet using ahorizontal air-cushion system. This device consists of the body frame and the driving frame that are combined to realize a frame for conveying glass without any contact.The driving frame comprises an air flotation table (bed), drive roller supported at both ends, and ASU. Part of the ASU serves to control the airflow as the chamber consists of a porous pad and fan. Fiber filters replace the porous pad and axial fans serve as an air compressor. In addition, to determine the appropriate glass levitation from the air table, this study examined the design specifications of the applied filter (discharge speed of HEPA and ULPA filters, and flow rate) as well as the height of the and the proper supporting roller height (14mm). Then, after adjusting the position of the ASU and the number of ASUs required to configure the UNIT air floating C/V, we analyzed the height and flatness of the glass and derived the appropriate layout (1140-mm distance between ASUs).

자동차 통풍 시트의 유량 평가 (Estimation of Air Flow Rate in Automotive Ventilated Seat)

  • 이현희;김태경;이광주
    • 한국산학기술학회논문지
    • /
    • 제17권12호
    • /
    • pp.34-40
    • /
    • 2016
  • 소비자들의 요구 증가로 고급차종에만 적용하던 통풍 시트는 점차 중소형 차종으로 확대 적용되고 있는 추세이다. 팬에서 발생한 유량이 폼 패드, 필터 폼 및 시트 커버 등을 통과하는 과정에서 많은 손실이 발생하기 때문에, 착좌면에 도달하는 유량의 정확한 해석은 쉽지 않다. 또한 유로 형상이 복잡하여 이의 정확한 모델링 없이는 착좌면에 도달하는 정확한 유량의 해석이 힘들다. 본 연구에서는 팬에서 발생한 유동이 통기 매트와 폼 패드를 통과하였을 때의 유량을 해석하였으며, 해석결과와 실험결과를 비교하였다. 해석에서 유동분산판 내부의 돌기 형상을 보다 정확하게 모델링함으로써, 해석결과와 실험결과의 경향을 정확하게 일치시킬 수 있었다. 유량이 통기성 재료인 패드 폼을 통과하는 과정에서 발생한 손실을 실험으로 측정하여 해석결과를 보정함으로써 해석결과와 실험결과를 정확하게 일치시킬 수 있었다. 다음으로 필터 폼과 시트 커버를 통과하여 착좌면에 도달하는 유량을 실험으로 측정하였다. 착좌면에서의 유량이 많지 않아서, 유량 콘을 사용하여 유량을 측정하였다. 팬에서 발생한 유량의 약 35.7%만이 최종적으로 착좌면에 도달하는 것을 확인할 수 있었다.

사각 천장형 루버 디퓨저의 토출 각도에 따른 실내유동에 관한 연구 (Study on Indoor Flow According to Vane Angle of Square Ceiling Type Louver Diffuser)

  • 장헌덕;이대희;이진호
    • 대한기계학회논문집B
    • /
    • 제36권7호
    • /
    • pp.683-687
    • /
    • 2012
  • 본 연구는 CFD 해석을 이용하여 사각 천장형 루버 디퓨저의 토출각도와 토출 유량에 따른 실내 공기유동 특성에 관한 것이다. CFD 툴은 상용프로그램인 ANSYS 13.0의 CFX를 이용하였다. 연구에 사용된 디퓨저는 적은 유량에서도 충분한 도달거리를 확보할 수 있도록 모델링하였으며, 실내 크기는 $6{\times}6{\times}2.7m$로 디퓨저의 대각선 방향으로 원형 배기구를 모델링 하였다. 토출 공기의 체적유량은 5.1CMM, 7.4CMM이며, 디퓨저의 토출각도를 $30^{\circ}$에서부터 $60^{\circ}$까지 $10^{\circ}$씩 변화하여 실내의 유동특성에 대하여 고찰하였다.

자연공기(自然空氣)에 의(依)한 벼 건조(乾燥) 시뮤레이션(II) : 요인분석(要因分析) 및 열대기후하(熱帶氣候下)의 건조가능성(乾燥可能性) 조사(調査) (Simulation of Rough Rice Drying by Natural Air(II) : Factors Evaluation and Feasibility Study for Tropical Weather)

  • 장동일
    • 농업과학연구
    • /
    • 제11권2호
    • /
    • pp.270-277
    • /
    • 1984
  • 자연공기(自然空氣)에 의(依)한 벼 건조의 요인영향(要因影響)을 시뮤레이션 모델에 의(依)하여 분석(分析)하였다. 분석(分析)된 요인(要因)들은 송풍량(送風量), 수확시기(收穫時期), 초기수분함량(初期水分含量) 그리고 기상조건(氣상條件)이었다. 시뮤레이션을 위해서는 RICEDRY model 을 이용(利用)하였다. 그리고 개발(開發)된 시뮤레이션 모델이 외국(外國)의 기상조건하(氣象條件下)에서 적용(適用)될 수 있는가와 자연공기(自然空氣)에 의(依)한 벼 건조(乾燥)가 가능(可能)한가를 중남미(中南美)의 코스타리카의 기상자료(氣상資料)를 이용(利用)하여 시험(試驗)하였다. 이상(以上)의 연구(硏究)를 통(通)하여 다음과 같은 결론(結論)을 얻을 수 있었다. 1. 송풍량(送風量)이 많을수록, 건조시간(乾燥時間)이 짧았고 건물손실(乾物損失)이 적었다. 2. 수확시기(收穫時期)에 따른 건물손실간(乾物損失間)에는 현저(顯著)한 차이(差異)가 있었다. 3. 초기수분함량(初期水分含量)이 높을수록, 건조층내(乾燥層內)에서 건물손실(乾物損失) 변화도(變化度)가 컸다. 4. 건조층(乾燥層)의 최하부(最下部)의 벼 수분함량(水分含量)은 기상변화(氣象變化)에 매우 민감(敏感)하게 변화(變化)하였으며, 중간층(中間層)과 최상층(最上層)의 수분함량(水分含量)은 비교적(比較的) 기상변화(氣象變化)에 따른 변화(變化)가 적었다. 5. 시뮤레이션 모델(RICEDRY)는 외국(外國) 기상조건하(氣象條件下)에서도 적용(適用)될 수 있었으며, 열대기후하(熱帶氣候下)에서도 자연공기(自然空氣)에 의(依)한 벼 건조(乾燥)가 가능(可能)함을 알 수 있었다.

  • PDF

THE ROLE OF GINSENG DRYING IN THE HARVEST AND POST-HARVEST PRODUCTION SYSTEM FOR AMERICAN GINSENG

  • Bailey W.G.;Dalfsen K.B. van;Guo Y.
    • 고려인삼학회:학술대회논문집
    • /
    • 고려인삼학회 1993년도 학술대회지
    • /
    • pp.155-163
    • /
    • 1993
  • An American ginseng(Panax quillquefolium L) industry has emerged in British Columbia, Canada over the past ten years. Interest has grown very rapidly and with this development, attention is now moving away from field production issues and emphasis is being directed to enhancements in ginseng storage, drying and processing. There is a dearth of knowledge on these aspects even though they are crucial to international competitiveness. Enhancement dicatates the application of a systems approach to optimizing the harvest and post - harvest production system(crop digging, pre - washing cold storage. washing, drying and post - drying storage). Research in British Columbia to date has focussed on drying and storage issues and has resulted in the design of an enhanced commercial drying system. The role of dryer management, loading rates, airflow rates and pre - drying cold storage on American ginseng root drying rates and root quality were examined. From the dryer management experiments, there are distinct advantages to size sorting root to yield optimum drying rates. If unsorted root is used, efficiency is increased if the trays are systematically rotated. Loading rate experiments illustrate that increasing rates above those currently used in commercial dryers are possible without any sacrifice in quality. This has significant implications for commercial drying. Pre - drying cold storage is a most significant tool for managing drying operations. Over a period of six weeks, no discernable decrease in quality was found as a consequence of cold storage. Further, the moisture loss and the associated root surface changes(loss of surface soil in storage for example) provide new challenges for root quality management. Continued research and technological innovation will be crucial in addressing the demanding challenges of the future.

  • PDF

대단면 석회석 광산 갱도 내 국부선풍기 승압력 및 통기효과 비교 연구 (A Comparative Study on the Auxiliary Fan Pressure and the Ventilation Efficiency in Large-opening Limestone Mine Airways)

  • 박동준;강현호;이창우
    • 터널과지하공간
    • /
    • 제27권1호
    • /
    • pp.1-11
    • /
    • 2017
  • 국내 지하 석회석 광산은 대부분 대단면 갱도로 개발되고 있으며 갱내통기는 주요 선풍기에 의한 통기방식보다는 자연통기 및 국부통기에 의존하고 있다. 국부통기는 국부선풍기와 풍관을 이용한 급배기 통기방식을 적용하고 있으나 대단면 갱도 특성과 갱내 굴진 운반장비의 디젤화에 따라 소요통기량이 대폭 증대하여 통기의 효율 및 경제성 확보가 주요과제로 대두되고 있다. 본 연구에서는 대단면 갱내 작업장 국부통기를 위한 선풍기 용량 최적화를 위하여 축류식 및 프로펠러 선풍기를 개발하여 갱내 승압력 및 통기효과를 비교 분석함을 목적으로 한다.

Impregnated Active Carbon-Shelf Life Studies and Its Evaluation Against Cyanogen Chloride with and without Canister

  • Singh, Beer;Saxena, Amit;Srivastava, Avanish Kumar;Dubey, Devendra Kumar;Gupta, Arvind Kumar
    • Carbon letters
    • /
    • 제8권4호
    • /
    • pp.280-284
    • /
    • 2007
  • Samples of active carbon of $1150\;m^2/g$ surface area were impregnated with ammoniacal salts of copper, chromium and silver, with and without triethylenediamine. The samples of impregnated carbon were aged at $50^{\circ}C$, with and without 90% RH (relative humidity), for a little more than one year and chemically evaluated periodically. Initially copper (II) and chromium (VI) reduced very fast in the samples in humid atmosphere to the extent of 30% and 60% respectively in four months. These values were found to be unaffected by the presence of triethylenediamine (TEDA) indicating that the chemical did not retard the reduction process of chromium (VI) and copper (II). However, in the absence of humidity the reduction of the impregnants was significantly less (10-12%, w/w) in four months. It was quite evident; therefore, that the moisture was mainly responsible for the reduction of chromium (VI) and copper (II) species in impregnated carbons. The prolonged ageing of the samples with and without triethylenediamme after four months with and without humid atmosphere showed that the extent of reduction of chromium (VI) was very low, i.e. 5-10% and of copper (II) was 2-25%. Silver is not reduced due to carbon, as it remained unchanged in concentration on storage. The impregnated carbon samples (100 g) without triethylenediamine, which were aged at room temperature for 5 years in absence of humidity and unaged when evaluated against cyanogen chloride (CNCl) at a concentration of 4 mg/L and airflow rate of 30 lpm showed a high degree of protection (80- 110 minutes).

성대마비와 성대구증의 강도 변화에 따른 최대발성지속시간 비교 (Comparison of Maximum Phonation Time Associated with the Changes in Vocal Intensity in Patients with Unilateral Vocal Fold Palsy and Sulcus Vocalis)

  • 최세진;최홍식;김재옥;최예린
    • 말소리와 음성과학
    • /
    • 제4권1호
    • /
    • pp.125-131
    • /
    • 2012
  • The patients with incomplete glottic closure have an important feature decreasing the maximum phonation time (MPT) because airflow rate or air leakage is greater than people without voice disorders. Also they can appear a problem in the intensity regulation. This study analyzed MPT difference based on the comfortable intensity and louder intensity and the correlation between MPT and respiration volume of unilateral vocal fold palsy (UVFP) and sulcus vocalis (SV) group. The twenty with UVFP, the 21 with SV, the 21 normal subjects measured MPT in /a/ vowel prolongation task with comfortable intensity and louder intensity and compared analysis by measuring FVC, $FEV_1$, $FEV_1/FVC$ to analyze the correlation between MPT and respiration volume. First, a comparison of MPT according to the intensity between groups is that MPT of the normal group was statistically significant long compared to the patient group in comfortable intensity, but MPT between groups was not statistically significant difference in the louder intensity. Second, an analysis of the correlation between MPT and respiration volume is that this was statistically significant correlation between MPT in comfortable intensity and MPT in louder intensity. But this did not show statistically significant correlation between intensity and respiration volume. This study can be supported the preceding study results deduced that shorting MPT of the patient group compared to the normal group was originated in the problem of laryngeal valving mechanism at the level of vocal folds rather than a problem of respiratory function. Also at the phonation by varying the intensity, the result can deduce that in the case of patient group, the length of MPT had been improved by increasing the glottal closure ratio in the louder intensity. These results can support the theoretical basis that should be applied to the clinicians by varying the intensity at the voice evaluation and voice therapy for the patients with the glottis incompetence.

한냉과 온열의 적용 시간과 전달 방식이 장딴지근의 근 활성도에 미치는 영향 (The Effect of Transfer Modality, Temperature, and Application Time on Gastrocnemius Muscle Activation in Healthy People)

  • 이영신;배세현
    • 대한물리의학회지
    • /
    • 제12권2호
    • /
    • pp.1-8
    • /
    • 2017
  • PURPOSE: The purpose of this study was investigate the changes of gastrocnemius (GCM) muscle activity by applying different hot and cold therapeutic modalities. METHODS: A total of 20 healthy subjects were enrolled into the study. We selected transfer modalities that are frequently used in clinical settings: conduction, radiation, and convection. We performed hot pack, ice pack, and infrared therapy for 10, 20, and 30 minutes. After each application, a break was taken between each day. In addition, we performed cryotherapy for 3 min (airflow rate = $-6{\sim}-20^{\circ}C$). We measured muscle activity changes in the GCM muscle. RESULTS: For the conduction method, muscle activity significantly increased after ice pack therapy for 10 min and 20 min but decreased after hot pack therapy for 10 min and 20 min. For the radiation method, muscle activity significantly decreased after infrared therapy for 10 min and 20 min. For the convection method, muscle activity significantly increased after cryotherapy for 3 min and 10 min. There were no differences in the change of muscle activity in the conduction and radiation transfer method using heat. However, there were differences in the change of muscle activity in the conduction and convection transfer method with cold application. CONCLUSION: For a reduction in muscle activity, regardless of the transfer type, thermal application for 20 min would be effective. For an increase in muscle activity, cold pack application or cryotherapy for 20 min would be effective. This study could contribute toward therapeutic modality application in changing muscle activity.

Measurement Uncertainty of Nicotine in Environmental Tobacco Smoke (ETS)

  • Lee, Jeong-Il;Lee, Cheol Min;Shim, In-Keun;Kim, Seong-Mi;Lee, Woo-Seok;Kim, Yoon-Shin
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권8호
    • /
    • pp.2394-2398
    • /
    • 2013
  • Nicotine is the main component of environmental tobacco smoke, and its presence in indoor air is widely used as a secondhand-smoke indicator. Environmental tobacco smoke is a major source of indoor air pollution, but sufficient investigation of the uncertainty of its measurement, which mirrors the reliability of nicotine measurement, has not been performed. We calculated the uncertainty of measurement of indoor air nicotine concentration at low, medium, and high concentrations of 11.3798, 10.1977, $98.3768{\mu}g/m^3$, respectively, and we employed the Guide to the Expression of Uncertainty in Measurements (GUM), proposed by the International Organization for Standardization (ISO). The factors considered in determining the uncertainty were uncertainty of the calibration curve (calibration curve and repeated measurements), desorption efficiency, extraction volume, and sampling airflow (accuracy and acceptable limits of flowmeter). The measurement uncertainty was highest at low concentrations; the expanded measurement uncertainty is $0.9435{\mu}g/m^3$ and is represented as a relative uncertainty of 63.38%. At medium and high (concentrations, the relative uncertainty was 13.1% and 9.1%, respectively. The uncertainty of the calibration curve was largest for low indoor nicotine concentrations. To increase reliability of measurement in assessing the effect of secondhand smoke, measures such as increasing the sample injection rate ($1{\mu}L$ or more), increasing sampling volume to increase collected nicotine, and using gas chromatography-mass spectrometry (GC/MS) or GC/MS/MS, which has a lower quantitation threshold, rather than gas chromatography with nitrogen phosphorous detector, should be considered.