• International Journal of Internet, Broadcasting and Communication
• /
• 제14권1호
• /
• pp.201-208
• /
• 2022

As around the world, ground and underground transportation capacity is reaching its limit, centering on urban areas. As urban traffic becomes congested, time and cost are astronomical, and environmental destruction caused by urban pollution is becoming increasingly serious. As a way to solve this problem, the means of flying over the air are in the spotlight as the next generation of future transportation, and the concept of urban air mobility (UAM, Urban Air Mobility) is defined as systematic planning. The development of an electric-powered vertical take-off (eVTOL) aircraft that obtains electric power through a battery using a personal aerial vehicle (PAV) as a means of transportation has accelerated. As the aircraft development of new technology aircraft in the evtol method is actively carried out, the need to prepare systems such as aircraft certification standards, pilot qualification systems, and qualification management is emerging. The Federal Aviation Administration (FAA) and the European Union Aviation Safety Agency (EASA), which lead international standards, announced new special technical conditions and temporary regulations SCVTOL-01, respectively. However, the pilot qualification system for operating the uam aircraft has not yet been clearly announced. Therefore, this paper analyzes the recently announced FAA regulations and EASA regulations to identify differences and directions in perspectives on UAMs and study the existing vertical take-off and landing aircraft (VTOL) pilot qualification system to present directions for qualification classification.

• 항공우주시스템공학회지
• /
• 제7권3호
• /
• pp.45-50
• /
• 2013

This is a research report about the method of how to maintain qualification of certification flight test crews. KCA(Korea Certification Agency) have completed the KC-100 airplane certification flight tests which is the first time experienced flight tests operation. After the certification flight test, it has been found that annual flying time requirement of 100 hours to the certification flight test pilot is too strict, and other several requirements to maintain the qualification of the certification test crew such as aircraft certification introduction training, initial flight test pilot and flight test engineer certification training, crew resource management training, aviation physiology training, and survival training was difficult to implement in Korean civil aviation environments. In this study, it was suggested that 30 hours of flying time for maintaining certification flight test pilot qualification could be applied to contribute for safe operation of certification flight test and the other training requirements of the certification flight test crew could be fulfilled using self made training courses, existing FAA training courses and Korean Air Force training resources. Therefore, it is recommended that the regulation of maintaining the certification flight test crew qualification should be refined to implement the requirement practically.

• International Journal of Aerospace System Engineering
• /
• 제10권1호
• /
• pp.14-24
• /
• 2023

The materials applied to the aircraft fuselage, parts, and components must be verified by relative authorities in accordance with the procedures set by the airworthiness authority to achieve the aircraft type certification. There are no examples of domestic composite materials which were verified in order to be applied to aircraft structure. In this study, the composite material certification system of NCAMP, an American composite material standard certification organization, was reviewed and used as the fundamentals of the first aerospace composite material certification system in ROK(Fig 2,8). Also updated material certification documents were developed and confirmed by material certification engineers and inspectors. This aerospace composite material qualification system is intended to modernize the material certification system for AAM(Advanced Air Mobility) as well as aircraft and to enhance the understanding of related technicians and inspectors.

• Composites Research
• /
• 제36권5호
• /
• pp.361-368
• /
• 2023

항공기에 사용되는 복합소재는 항공기의 감항성 확보를 위하여 인증된 소재를 사용해야 하며 소재의 물리적 특성 및 공정을 확인하여 재료규격 및 공정규격서등의 인증 문서와 시스템을 승인하는 방식으로 인증이 진행된다. 국내 복합소재 인증시스템은 국토교통부의 항공기용 복합재료 시범인증 사업을 통해 마련되었으며 현재 항공기 전문검사기관인 항공안전기술원에서 인증 및 공유 데이터시스템을 구축하여 운영하고 있다. 본 논문은 실증을 바탕으로 구축된 항공기용 복합소재 인증체계의 개선사항을 식별하고 이에 대한 개선 방안 도출을 통해 국산 항공기용 복합소재의 인증 및 산업 활성화 방안을 제시하였다.

• 한국군사과학기술학회지
• /
• 제19권5호
• /
• pp.654-661
• /
• 2016

An unmanned aircraft refers to an aircraft which carries no human pilot and is operated under remote control or in autonomous operational mode. An unmanned aircraft system consist of a one system which include UAV(s), UAV control station and data link, etc. As the UAVs can perform the dull, dangerous and difficult missions, various kinds of UAVs with different sizes and weights have been developed and operated for both civil and military areas. It is important to develop the airworthiness certification criteria of the UAVs to minimize the risks of fatal impacts on human life and environment and to achieve the equivalent level of safety to the manned aircraft. Analysis of the KAS Part 23 and STANAG 4671 can provide guidelines for the generation of the airworthiness certification criteria for the UAVs in civil application.

• 한국항공우주학회지
• /
• 제45권1호
• /
• pp.79-84
• /
• 2017

본 연구는 미래 성장산업으로 각광을 받고 있는 무인비행장치 교육훈련 및 조종자격증명제도 개선방안을 항공선진국의 사례와 전문가 인터뷰를 통하여 제시하였다. 개선방안으로 무인비행장치 조종사에 대한 명확한 개념의 정립, 무인비행장치 자격증명 및 자격증명 유지를 위한 제도시행, 자격증명 취득을 위한 표준교재 개발과 보급, 모의비행장치 인증기준 마련 등을 제시하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 춘계 학술대회논문집
• /
• pp.14-16
• /
• 2007

A critical problem in the integration of stores into new and existing aircraft is the safe separation of the stores from the aircraft at a variety of flight conditions representative of the aircraft flight regime. Typically, the certification of a particular store/aircraft/flight condition combination is accomplished by a flight test. Flight tests are very expensive and do expose the pilot and aircraft to a certain amount of risk. Wind tunnel testing, although less expensive than flight testing, is still expensive. Computational Fluid Dynamics(CFD) has held out the promise of alleviating expensive and risk by simulating weapons separation computationally. The forces and moments on a store at carriage and at various points in the flow field of te aircraft can be computed using CFD applied to the full aircraft and store geometry. This study needs full dynamic characteristics study and flow analysis for securing store separation safety. Present study performs dynamic simulation of store separation with flow analysis using Chimera grid scheme which is usually used for moving simulations.

• 한국항공운항학회지
• /
• 제22권4호
• /
• pp.65-74
• /
• 2014

Unmanned aerial vehicles(UAVs) refer to the aircraft which carries no human pilot and is operated under remote control or in autonomous operational mode. As the UAVs can perform the dull, dangerous and difficult missions, various kinds of UAVs with different sizes and weights have been developed and operated for both civil and military application. As the avionics and communication technology related to the UAVs are matured, the demand for the UAVs is dramatically increased. Therefore, It is important to develope airworthiness process and regulations of the UAVs to minimize related risk to the man and environment. This paper describes related regulations and classification of the small UAVs for different international airworthiness authorities. The analysis of the CS-LURS verses Stanag 4702 and Stanag 4703 can provide guidelines for the generation of the airworthiness certification criteria for the small UAVs in civil sector. This paper conducted kinetic impact energy analysis of the loss of the small UAVs control scenarios and of the very small UAVs under 66 joules. Based on the analysis, the energy impact analysis can be considered before the design certification approval for the small UAVs.

• 한국항공운항학회지
• /
• 제29권2호
• /
• pp.117-121
• /
• 2021

Multi-crew Pilot License (MPL) is an international pilot certification adopted by the International Civil Aviation Organization (ICAO) in 2006 under the recognition of the need for efficient and systematic pilot training including the education of pilots with advanced aviation technology and ability to respond to flight environment, resolution of the human factor problems of pilots, and provision of stable training tools for transport aircraft pilots for potential risk of pilot shortage in the future. South Korea also has prepared a legal basis for operating an MPL system in the Aviation Act in 2009, but there has been no domestic MPL qualifier. The biggest reason for this seems to be the insufficient domestic MPL training system. Therefore, it is necessary to benchmark the international standards of the ICAO, and to promote the development of the Korean MPL training system through revision and supplementation of laws and regulations in consideration of Korean circumstances.

• 한국항공우주학회지
• /
• 제49권7호
• /
• pp.593-599
• /
• 2021

e-VTOL 항공기는 전기동력으로 인한 운용유지비의 절감, 친환경성, 수직이착륙으로 인한 도심운용, 자동화로 인한 조종의 편리성 등 미래 교통수단으로 향후 수요가 급증할 것으로 예상된다. 이에 전 세계적으로 활발한 연구 개발이 진행 중에 있으나 상용화를 위해서 필수적으로 요구되는 안전성 확보와 인증에 있어 기술적으로 해결해야 할 문제점들이 상존한다. 이러한 어려움으로 운송사업용 형식증명 및 표준감항증명을 받은 e-VTOL 항공기는 아직까지 전 세계적으로 없는 상태이다. 현행 항공기 감항기술기준에서 요구되는 안전도 수준은 상당히 높고 이를 입증하는 과정도 상당히 까다롭다. e-VTOL 항공기 인증도 현행 감항기술기준에서 요구하는 안전도 수준을 만족해야 하나 현행 기준의 적용성과 동등한 안전성 확보에 필요한 기술적인 한계와 문제점이 존재한다. 본 연구에서는 이러한 기술적 한계와 문제점들을 e-VTOL 항공기의 특징과 함께 제시하고자 한다.