• 대한안전경영과학회지
• /
• 제13권3호
• /
• pp.209-215
• /
• 2011

Currently, 10% of the domestic aircraft accidents and 9% of delays and cancellations were generated due to poor maintenance. Aircraft maintenance work is divided into works in material warehouse and in hangar. In material warehouse, the problem in aircraft maintenance work is occurred when the serial number of parts are identified and entered. In hangar, work order are duplicatively written. In addition, the maintenance information is not shared and then work order is wrong delivered. In this study, we analyzed the maintenance process and the informations that occurs in the material warehouse and hangar for large airline company to solve the problems. And serial numbers are replaced by QR code. And documented work order and manual are handled using the tablet PC. In conclusion, this paper studied smart work of maintenance process about tire parts. We expect to improve the inefficiency of identification of serial number and total maintenance time is reduced by real-time information sharing.

• 한국화재소방학회논문지
• /
• 제31권6호
• /
• pp.67-73
• /
• 2017

항공기 정비 격납고는 고가의 항공기를 보관하거나 정비, 점검등을 하는 건축물로 화재발생 빈도는 낮지만 화재발생 시 인적, 물적 피해가 매우 클 수 있다. 따라서 본 연구에서는 Fault tree를 이용하여 현재 운용중인 항공기 정비 격납고 소화시스템의 화재 안전성에 대한 정성적 분석을 시행하고, 도출된 기본사상에 대한 고장률 자료를 활용하여 정량적 분석을 실시한 후 정상사상의 발생 확률에 대한 Minimal cut set의 중요도를 분석하였다. Minimal cut set에 의한 정성적 분석결과 항공기 격납고 포헤드 소화시스템의 화재제어 실패로 대형화재로 확대될 수 있는 사고경로는 14개라는 것을 알 수 있었다. 또한 정량적인 분석 결과 대형화재로 확대될 확률은 $2.08{\times}E-05/day$이며, Minimal cut set의 중요도 분석 결과 화재 발생 시 4개의 Minimal cut set 즉, 구역별 화재 감지기 및 포헤드 동작과 항공기 날개 및 Fire plume에 의한 소화약제 차단이 동일하게 24.95%로 대형화재로 확대될 가능성의 대부분을 차지하였으며, 항공기 정비 격납고의 포헤드 소화시스템은 항공기 날개 하부화재에 대한 적응성이 없어 개선이 필요한 것으로 Fault tree를 이용하여 처음 확인하였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권2호
• /
• pp.125-129
• /
• 2020

In this paper, Zero velocity UPdaTe (ZUPT) is implemented on the navigation system of Remotely Piloted Aircraft for GNSS denied environment. RPA's navigation system suffers from lack or loss of satellite signal while maintenance or ground test inside a hangar. Although some of the hangars install GPS repeaters for indoor tests, the anti-jamming equipment with array antenna blocks the repeater signal regarding them as hostile jamming signal. With ZUPT, an aircraft navigation system can be tested free from the divergence of navigation solution without line-of-sight satellites. The designed ZUPT aided centralized Kalman Filter is implemented on the Embedded GPS&INS and simulated with Captive Flight Test data. The simulation result shows stable navigation solution without GNSS updates.

• 대한안전경영과학회지
• /
• 제13권1호
• /
• pp.183-188
• /
• 2011

Management of maintenance parts in the aircraft have difficulty because of high cost of part, necessity of separate managements, and very many kinds of parts. The serial number of parts was used in maintenance process and then the results was depended on worker's ability. Also the workers used printed work order and manual at every time in maintenance processes. In this study, we analyzed the maintenance process and the information that occurs in the material warehouse and hangar for large airline company to solve the problems about inventory and visualization. Based on above analysis we developed the maintenance process with integrated by information technologies such as QR code and tablet PC. We expect the reduced errors resulting from visually checking and decreased work hours and maintenance cost and will finally develop the smart work.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2011년도 춘계학술대회
• /
• pp.445-450
• /
• 2011

본 논문에서는 항공기 정비 분야에서 paperwork와 현장-사무실의 구분된 작업에 Mobile device를 적용하여 직접적인 부품의 입/출고, 정비작업을 제외한 부분에서 인적오류 및 낭비가 발생하여 항공기의 AOG(Aircraft On Ground)가 길어짐에 따라 항공기를 사용하지 못하는 시간적 손해를 제거하여 정비 작업의 효율성을 높이는 방법을 제시하였다. QR code와 RFID, Tablet PC를 작업 대상 부품의 확인과 현장중심의 업무처리에 사용하였으며, 실시간으로 정비 진행 현황을 확인 할 수 있는 방법을 제시한 것이 본 연구의 특징이다. Arena 10.0으로 시뮬레이션을 구현하였고, 실제 자재보관창고와 hangar의 작업자와의 인터뷰를 통해 문제점 및 연구사항을 정의하였으며, 항공기 부품 중 바퀴를 대상으로 작업시간의 변화를 비교하였다. 시뮬레이션 결과 작업시간은 바퀴 한 개당 35.31분이 감소하였으며, 필요 작업 인원도 20%가 감소하였고, 정비 현장의 paperless를 달성하였다.

• 한국항공운항학회지
• /
• 제25권3호
• /
• pp.123-134
• /
• 2017

In order to advance into the MRO industry, the Aviation maintenance organization with suitable for the standards for personnel, facilities and operations should be first approved by FAA and EASA. The purpose of study is designed to arrange the standards required for personnel, facility, operation rule for approval of Repair Station maintenance organizations certified by FAA PART 145 of the US Federal Aviation Regulation. Also to consider the following differences through the comparative analysis with domestic AMO certification of the information in the Management, Maintenance Process, and Quality System for approval of maintenance organization authorized, the additional EASA PART 145. As a comparative analysis on maintenance organization certification in the country between FAA and EASA, this study could show us that domestic maintenance organization, certified manual contents are used by applying just many of the FAA system. And we could know that as part of the EASA maintenance organization certification process, airmen personnel were relatively systematically segmented and controlled. For domestic maintenance organization certification, operational as policy implications we would like to present policy implications such as the implication of rating system of Aviation Mechanic License like EASA, the financial support of the training center to resolve the shortage of the FAA or EASA license holders, operational organization as "CAMO" for systematic aviation mechanic certified system should be required, continued construction of hangar or MRO for airworthiness repair under Governmental support, and varied application of DER system from FAA accordingly.