• 대한공간정보학회지
• /
• 제22권2호
• /
• pp.33-40
• /
• 2014

현재의 평면적 지적도 표현 방법은 입체적으로 변화하는 시대적 흐름 속에 놓여 있으며, 이는 GPS 기술 및 레이저기술의 발전과 무관하지 않다. 또한 이러한 자료를 수용할 수 있는 정보저장 장치의 발전과 맞물려 현실세계를 그대로 반영할 수 있는 가상의 3차원 공간정보 구현 매체의 도움도 3차원지적과 분리하여 설명할 수 없다. 본 연구에서는 지상의 높이 값을 정확하고 신속하게 취득할 수 있는 항공라이다측량 기술을 지적도에 적용하기 위하여 항공라이다의 수직 정확도를 평가하기 위한 실험을 실시하였다. 이를 위해 연구지역을 선정하여 항공라이다 측량을 실시했으며, 취득된 성과의 정확도를 확인하기 위해 지적비교점 측량을 실시하였다. 또한 이러한 자료를 근간으로 쌍체표본 t검정을 적용하여 항공라이다측량 성과와 지상측량 성과의 정확도를 통계적 방법론에 의해 비교하였다. 검정결과 t값이 0.322로 유의수준 5%에서 귀무가설을 기각할 수 없어 두 측량 성과가 동일함을 증명 할 수 있었다. 이와 같은 결과를 통해 항공라이다측량 성과를 향후 3차원지적 정보의 지형기반 자료 구축에 적용할 수 있음을 알 수 있었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.676-679
• /
• 2006

Mangrove crowns were delineated using active sensor LIDAR (LIght Detection And Ranging) data by a crown delineating model developed in this study. LIDAR data were acquired from airborne survey by a helicopter for the estuary of Macouria in the northeast coast of French Guiana. The canopy height image was derived from LIDAR vector data by calculating the difference between ground and non-ground data. The mangrove site in the study area was classified to three sectors by the time of mangrove settlement; Mangrove 1986, 2002 and 2003. The estimated crown of Mangrove 1986 was reliable defined for their size, number and volume because of larger crown size and bigger variation of crown height. The tree crown size of Mangrove 2002 and 2003 by the model was overestimated and the number of trees was much underestimated. The estimated crown was not for single crown but a crown group due to homogenous crown height and spatial resolution of LIDAR data. However the canopy height image derived from LIDAR data provided three-dimensional information of mangroves.

• 한국산림과학회지
• /
• 제96권3호
• /
• pp.251-258
• /
• 2007

항공 Lidar 기술을 이용한 산림조사 기법은 현지조사 및 항공사진을 이용한 기존 조사방법의 한계를 극복할 수 있는 대안으로 떠오르고 있다. 본 연구에서는 국내 산림지형의 특성을 고려하여 개체목 인식 및 수고(樹高)추출을 위한 항공 Lidar자료의 기본적인 처리기법을 제시하고자 한다. 경기도 유명산 조림지를 대상으로 촬영된 항공 Lidar 원시자료로부터 비지면점을 제거하는 기법을 적용하여 순수 지표면을 표현하는 수치표고모형자료(DEM)를 생성하였다. 이렇게 제작된 DEM자료를 기반으로 비지면점에 해당하는 신호값들을 추출한 후 수관고모형(CHM)자료를 생성하였다. CHM자료에 개체목의 수고를 추출하는 필터링 기법을 개발하였다. 연구 지역의 낙엽송 및 잣나무 표본임분을 대상으로 항공사진 및 현지 측정된 자료와 비교한 결과, 개체목의 본수는 90% 이상의 정확도로 추출되었으며, 수고는 평균 1.1m 낮게 추정되었다.

• 한국측량학회지
• /
• 제34권2호
• /
• pp.143-151
• /
• 2016

The distribution of seabed rock in the coastal area is relevant to navigation safety and development of ocean resources where it is an essential hydrographic measurement. Currently, the distribution of seabed rock relies on interpretations of water depth data or point based bottom materials survey methods, which have low efficiency. This study uses the airborne bathymetric Lidar data and the hyperspectral image to detect seabed rock in the coastal area of the East Sea. Airborne bathymetric Lidar data detected seabed rocks with texture information that provided 88% accuracy and 24% commission error. Using the airborne hyperspectral image, a classification result of rock and sand gave 79% accuracy, 11% commission error and 7% omission error. The texture data and hyperspectral image were fused to overcome the limitations of individual data. The classification result using fused data showed an improved result with 96% accuracy, 6% commission error and 1% omission error.

• Korean Journal of Geomatics
• /
• 제3권2호
• /
• pp.115-122
• /
• 2004

NASA, NSF and USGS jointly conducted airborne LIDAR surveys to acquire numerous surface points with high densities over the Antarctic Dry Valleys and its vicinity, The huge set of these points retains two characteristics undesirable for DEM generation, which are unusually high blunder ratio and large variation of the local point densities. Hence, in order to not only reduce the undesirable effects due to these characteristics but also process the huge number of points within reasonable limits of time and resources, we developed an efficient, robust, nearly automatic approach to DEM generation. This paper reports about the application of this approach to generating high-resolution precise DEMs from the Antarctic LIDAR surveys and the evaluation of their accuracy.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.504-507
• /
• 2006

Airborn Lidar technology has been applied to diverse applications with the advantages of accurate 3D information. Further, Lidar intensity, backscattered signal power, can provid us additional information regarding target's characteristics. Lidar intensity varies by the target reflectance, moisture condition, range, and viewing geometry. This study purposes to generate normalized airborne LiDAR intensity image considering those influential factors such as reflectance, range and geometric/topographic factors (scan angle, ground height, aspect, slope, local incidence angle: LIA). Laser points from one flight line were extracted to simplify the geometric conditions. Laser intensities of sample plots, selected by using a set of reference data and ground survey, werethen statistically analyzed with independent variables. Target reflectance, range between sensor and target, and surface slope were main factors to influence the laser intensity. Intensity of laser points was initially normalized by removing range effect only. However, microsite topographic factor, such as slope angle, was not normalized due to difficulty of automatic calculation.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1374-1376
• /
• 2003

NASA, NSF and USGS jointly conducted a LIDAR survey over several sites in the Antarctic Dry Valleys and its vicinity, acquiring numerous surface points by NASA's Airborne Topographic Mapper (ATM) conical laser scanning altimetry system. The data set have high blunder ratio, and the conical scanning pattern resulted large variation of the point densities. Hence, to reduce the undesirable effects due to these characteristics and process the huge number of points with reasonable time and resources, we developed a novel approach to generate large-scale and high-resolution DEMs in robust, efficient and nearly automatic manners. Based on this approach we produced DEMs and then verified them with reference data.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.457-462
• /
• 2006

Coastline has been considered as fundamental geographic information of a nation. Recently, the coastlines of higher resolution and accuracy with less update period ever than before are increasingly required. This requirement cannot be easily satisfied with the most traditional methods based on field survey such as leveling or GPS measurements. The newly developed airborne LIDAR system can be used as a promising alternative since it rapidly acquire numerous three-dimensional points densely sampled from the terrain around the coastline. Hence, in this study we developed a nearly automatic method to extract the coastline from LIDAR data and applied it to real data to verify its performance. From the comparison of the extracted coastlines with those from a digital map, we conclude that the proposed method can provide more accurate and precise lines.

• 한국어업기술학회:학술대회논문집
• /
• 한국어업기술학회 2001년도 추계 수산관련학회 공동학술대회발표요지집
• /
• pp.26-27
• /
• 2001

Two sea survey instruments were introduced: continuous underway fish egg sampler (CUFES) and an airborne light detecting and ranging (LIDAR) for survey of epiplegic fish. We have used CUFES in ichthyoplankton surveys primarily for Pacific sardine (Sardinop sagax) eggs off California since 1996 and it is also being used in many parts of world for sardine and anchovy egg surveys. (omitted)

• 한국측량학회지
• /
• 제24권5호
• /
• pp.389-397
• /
• 2006

본 논문은 라이다 데이터를 활용하여 지형에 대한 3차원 해석을 보여 주는 것이다. 일반적으로, 라이다 측량은 항공레이저스캐너를 이용하여 지표의 정량 및 정성적 정보를 얻을 수 있는 방법이다 획득된 라이다 데이터를 사용해 불규칙 삼각망, 수치표면모형 및 수치표고모형 등의 지형 데이터를 만들어 지형의 가시성, 음영기복, 경사방향 및 경사도와 같은 요소들을 조사했다. 각 항목으로부터 얻은 해석 결과들은 지형해석에 있어서 주요한 요소로 사용되어지며, 라이다 측량이 지형해석을 위한 새로운 방법으로 이용되기를 기대한다.