• 농업과학연구
• /
• 제38권3호
• /
• pp.505-512
• /
• 2011

Structural characteristics for standard models of single-span plastic greenhouse in Korea and high tunnels in North America were analyzed, and comparative analysis for greenhouse environments measuring in Korean farmhouse and Rutgers high tunnel was carried out to find structural and environmental improvements of single-span plastic greenhouses that occupy most of Korean greenhouse. Widths of high tunnels are similar to single-span plastic greenhouses but their heights are high comparatively and their side heights are fairly higher than single-span plastic greenhouses specially. Rafters, which are main frames, section sizes of high tunnels are bigger and their intervals are wider than single-span plastic greenhouses. Relative bending resistances compared with representative Korean greenhouse were analyzed by 0.92 to 1.42 in single-span plastic greenhouses, and 1.38 to 2.96 in high tunnels. Frame ratios of single-span plastic greenhouses were 6.8 to 8.6%, and those of high tunnels were 5.5 to 8.7%. We analyzed air temperatures and solar radiations measured in single-span plastic greenhouse and high tunnel on clear days in late March. There were outside temperatures in generally similar range, and judging by rise of indoor temperatures, ventilation performance of high tunnel is more excellent than single-span plastic greenhouse. Solar radiations of two areas were no big difference but light transmittance of high tunnel was a little bit higher than single-span plastic greenhouse. Single-span plastic greenhouses are disadvantageous in environmental managements such as ventilation performance and light transmittance because distance between greenhouses is too narrow and length of greenhouse is too long compared to high tunnels. To get the environmental improvement effects as well as to increase the structural resistance of single-span plastic greenhouses are achievable by widening the width of greenhouse in possible range, widening the space between rafters, and enlarging the section size of rafters. Also, we need to secure enough distance between greenhouses and to restrict the length of greenhouse by maximum 50 m in order to improve the ventilation performance and the light transmittance.

• 한국환경과학회지
• /
• 제19권3호
• /
• pp.295-304
• /
• 2010

Actual evapotranspiration (AET) in the Suyeong-gu was estimated and correlations between AET and meteorological factors were analyzed. The study area was Suyeong-gu lay at the east longitude $129^{\circ}$ 05' 40" ~ 129$^{\circ}$ 08' 08" and north latitude $35^{\circ}$ 07' 59" ~ $35^{\circ}$ 11' 01". The Kumryun mountain, the Bae mountain, the Suyeong river and the Suyeong bay are located on west, north, northeaster and south side in the study area, respectively. AET was estimated using precipitation (P), potential evapotranspiration (PET) and plant-available water coefficient. Meteorological factors to estimate PET were air temperature, dewpoint temperature, atmospheric pressure, duration of sunshine and mean wind speed (MWS). PET and AET were estimated by a method of Allen et al. (1998) and Zhang et al. (2001), respectively. PET was the highest value (564.45 mm/yr) in 2002 year, while it was the lowest value (449.95 mm/yr) in 2003 year. AET was estimated highest value (554.14 mm/yr) in 2002 year and lowest value (427.91 mm/yr) in 2003 year. Variations of PET and AET were similar. The linear regression function of AET as PET using monthly data was AET=0.87$\times$PET+3.52 and coefficient of determination was high, 0.75. In order to analyze relationship between the evapotranspiration and meteorological factors, correlation analysis using monthly data were accomplished. Correlation coefficient of AET-PET was 0.96 high, but they of AET-P and PET-P were very low. Correlation coefficients of AET-MWS and PET-MWS were 0.67 and 0.73, respectively. Thus, correlation between evapotranspiration and MWS was the highest among meteorological factors in Suyong-gu. This means that meteorological factor to powerfully effect for the variation of evapotranspiration was MWS. The linear regression function of AET as MWS was AET=84.73$\times$MWS+223.05 and coefficient of determination was 0.54. The linear regression function of PET as MWS was PET=83.83$\times$MWS+203.62 and coefficient of determination was 0.45.

• 대한기계학회논문집B
• /
• 제38권4호
• /
• pp.337-346
• /
• 2014

본 연구는 주기적 강제 진동이 가해지는 표면의 액적 모드 특성과 표면에 놓인 액적의 제거에 대한 조건을 실험적으로 이해하는 것을 목적으로 하고 있다. 액적의 거동을 명확하게 관찰하기 위해 아크릴 표면에 Teflon 코팅을 진행하여 접촉각을 높였고, 히스테리시스는 25도 이내로 진행하여 액적의 거동이 보다 쉽게 진행되도록 하였다. 본 실험은 먼지가 적은 청정실에서 실험이 진행되었다. 제작된 소수성 표면에 놓인 액적의 실제 공진 주파수를 예측하기 위해 이론 및 실험적 해석을 통해 두 접근방법의 타당성을 파악하였으며, 두 개의 초고속카메라를 액적의 상면과 측면에 설치하여 2가지 측면에서 액적의 다양한 형상 변형 특성- 모드 형상, 분리, 미소 액적의 발생, 그리고 좌우 비틀림의 특성을 관찰하였다. 이론 값 비교결과 실제 공진 주파수 값들의 차이가 약 18% 이하로 관찰되었으며, 이러한 차이는 접촉선 마찰, 비선형 벽 고착, 실험의 불확실성 등에 가장 큰 영향을 받는 것으로 판단된다. 사용된 스피커에 상대적으로 낮은 전압을 인가할 경우 액적의 접촉선은 고정된 상태에서 좌우 대칭적인 액적 형상진동이 나타났다. 반면, 높은 전압을 인가할 경우 액적의 접촉선은 비고정된 상태가 되면서 더 활발한 형상 진동이 나타났다. 가진 주파수가 모드 주파수와 일치할 경우에는 액적의 로브 크기가 주변부 주파수 일 때 보다 비교적으로 컸으며, 같은 전압을 인가 할 경우, 표면에 놓인 액적의 미소 액적 발생 및 완전한 제거는 2차 모드에서만 진행되는 것을 실험을 통해 규명하였다.

• 대한간호
• /
• 제29권3호
• /
• pp.25-35
• /
• 1990

It is a fact that there are recent increasing trends or incidence of the colorectal carcinoma among other colorectal diseases. In such trend, the early detection remain to be most important by the air contrast barium enema and total colonofiberscopy. There are several ways to prepare the colon for barium enema and colonofiberscopy which include several agents. The mechanical cleansing have been used most frequently since Brown's method was adapted to be most perfect for colon deansing. The ideal laxatives and enema solutions were limited to adequate dose, it's effectiveness, patient's diet and bowel habit, minimal side effect, low cost and simple to perform. In order to compare the effectiveness of various cleansing solutions, six experimental methods were formed as shown; 1. normal saline enema, 2. castor oil with normal saline enema, 3. castor oil with soap suds enema, 4. magnesium citrate with normal saline, 5. magnesium citrate with soap suds enema and 6. ingestion of Golyetly solution. The authors have compared and determined the degree of cleanness by an experienced endoscopist. The total number of patients was 247, age distribution was $43{\pm}15$ years old, and sex distribution was 133 males and 114 females. The grade I and II represented no difficulties at performing the colonofiberscopy, but grade ill and N had some difficulties, even unable to perform the colonofiberscopy. The effectiveness the cleansing agents, represented with grade I and II was 95.9% (47/49) in method 6, 93.2%(54/58) in method 2, 83.3%(30/33) in method 3, 70.0%(28/10) in method 5, 66.7%(16/24) in method i, and 45.7%(18/40) in method 4. Method 2 and 6 were the most effective in normal bowel habit patients. In constipated patients, method 6 was the most effective and all method except method 11 were effective in diarrhea patients. The degrees of less mucosal irritation by various bowel cleansing method were in the order of method 6(100%), 1(100%), 5(74%), 2(69%). In subjective symptoms and cleansing groups, abdominal distension, pain, nausea and vomiting were complained, and that's subject symptoms were in the order of method 3(88.9%), 6 (79.6%), 1(75%), 5(72.5%), 2(72.4%), 4(67.5%). In conclusion, we believe that the Golytely of the mechanical cleansing solution for colonofiberscopy was the most effective, but others depended on the patient's condition und bowel habit.

• Journal of Chest Surgery
• /
• 제30권8호
• /
• pp.739-746
• /
• 1997

기관결손을 대체할 이장적인 보철물을 개발하려는 다양한 실험연구가 있었다. 인공기관보철물의 조건으로 는 공기에 비투과성, 적이지 않는 형태의 안전성, 생체내에서 섬 유아세포의 증식과 상피세포 재생에 필요한 생체적합성이 요구된다. 생체적합성이 우수한 포리우레탄 소재의 다공성포리우레탄 튜브에 gelatin으로 도포하고 isoplastic고리를 보강하여 외경 20 m길이 30 m의 인공기관보철물을 제작하였다. 인공기관의 생체적합성과 상피세포재생을 촉진하기위해 콜라겐 물질인 gelatin을 감마선으로 고정하여 도포하였다. 인공기관보철물을 잡종성견 10마리를 대상으로 경흉부기관에 이식하였다. 실험군에서는 다공성 폴리머에 gelatin으로 피복한 인공기관을 이식하였고 대조군에서는 gelatin으로 피복하지않은 인공기관과 ,다공성 폴리머에 gelatin을 피복한 기관에 자가심장 편을 접합시킨 것을 이식하여 실험하였다. 다공성 폴리머에 gelatin피복한 기관과 자가심낭편을 접합한 기관 을 이식한 후 6주째에 인공기관 내면에 상피화가 관찰되었다. gelatin 피복한 기관을 대상으로 외번문합과 내 문합을 비교한 결과 외번문합에서 문합부의 육아종 협착이 더 심하게 생겼다. 심낭편을 접착한 기관에서는 문합부와 접착부에 감염과 염증이 있었다. 본 실험결과 다공성포리우레탄 튜브에 gelatin을 도포한 인공기관 보철물은 상피재생과 생체적합성이 우수하며 재질개선과 문합부의 협착을 막는 연구보완이 되면 임상적용 을 기대 할수 있다.

• 한국축산시설환경학회지
• /
• 제16권2호
• /
• pp.109-114
• /
• 2010

$\bigcirc$ 현장조사 결과 우리나라 개방식 돈사의 측벽 비율은 윈치시설이 90% 이상이었고, 반무창은 5%였으며 무창 또한 5% 전후로 조사되었다. $\bigcirc$ 리모델링 돈사는 복도덕트로 입기를 하였고 지붕 또는 측벽배기로 하였고 이때 돈사의 폭 10~12 m, 길이 30~50m 전후로 조사되었다. $\bigcirc$ 에너지 절감효과를 위한 복도 설치는 개방식 돈사의 리모델링 개조시 돈사 출입문에 복도 2~3 m (돈사길이 비율 7~8%)를 설치가 양호하였다. $\bigcirc$ 리모델링 돈사의 환기시스템은 복도에서의 덕트를 통한 입기를 실시하고 양쪽 측벽을 판넬 등으로 밀폐화 (무창)를 하고 측벽배기를 하였다. $\bigcirc$ 폐사율 저감은 개선전 11% (47두)에서 개선후 3% (12두) (73% 감소) 되었으며, 에너지 절감효과는 개선전 155만 원 (5,595 kw)에서 개선후 73만 원이었다. $\bigcirc$ 경제성을 분석한 결과 400두 돈사를 리모델링 할 경우 겨울철 4개월 (12월부터 3월까지) 사육할 경우 2,835,680원 이익을 얻을 수 있었다.

• 한국산학기술학회논문지
• /
• 제16권4호
• /
• pp.2415-2423
• /
• 2015

본 논문은 12.7mm 원관을 변형하여 만든 세장비 0.6(짧은 직경 10.0mm, 긴 직경 16.5mm)의 타원관이 적용된 사인 웨이브 핀-관 열교환기의 습표면 공기측 성능실험에 관한 것이다. 핀 핏치와 열 수를 변화시켜 총 12개의 시료에 대하여 실험을 수행하였다. 타원관에서 핀 핏치 변화에 따른 j, f 인자의 영향은 미미 하였으나, 열수에 따라서는 1row에서 j인자가 가장 낮았다 (가장 높은 2row의 81%). 하지만 원관에서는 1row에서 가장 높게 나타나는 차이점을 보였다. 이는 타원관에 적용된 사인 웨이브 채널의 유동 특성에 기인한 것으로 판단된다. 원관 열교환기와 $j/f^{1/3}$값을 비교한 결과 1열을 제외하고는 타원관 열교환기의 전열성능이 우수함을 알 수 있다. 즉, 타원관 열교환기의 $j/f^{1/3}$값이 원관의 값보다 2열에서 1.6~2.5 배, 3열에서 1.4~2.4 배, 4열에서 1.2~1.8배 크게 나타났다.

• 한국대기환경학회지
• /
• 제21권1호
• /
• pp.119-129
• /
• 2005

The ambient TSP data measured at Seoul, Incheon. Taean, Daegu, Busan in Korea were used to explain the chemical composition and general features of Asian Dust (AD) observed in Korea. 9 episodes out of 19 were sampled from 2000 through May 2002, and measurements were conducted covering ionic and metal components with mass concentration. The results showed that daily averaged mass concentration (TSP) during the AD episodes was 458 $\mu\textrm{g}$/㎥, and ionic and metal concentrations were 27.93 $\mu\textrm{g}$/㎥ and 71.7 $\mu\textrm{g}$/㎥, respectively, accounting for 6.1 % and 15.5% of the total aerosol mass. TSP concentrations during episodes were varied from 120 to 1742 $\mu\textrm{g}$/㎥ according to the impact of Asian Dusts and had a tendency of showing higher values at sites in the west side of Korea, which can be explained by the effect of diffusion and deposition. In this study, ionic components like Ca (NO$_3$)$_2$, CaSO$_4$, NaNO$_3$, Na$_2$SO$_4$ were prominent types in secondary aerosol during AD periods and also indicated that V, Co as well as soil elements such as Ca, Fe, Mg, Mn, K correlated well with Al, while Cu, Cd, Pb, Zn didn't agree well with it. In addition, enrichment factors (EFs) for each metal component were obtained to provide simple information about source contribution of Asian Dust, and the results were compared with those from other AD studies. In this study, the results showed that aerosol properties in Korea during the Asian Dust were considerably different from those of general atmospheric condition and specially varied from case to case rather than site to site, which implies that there are certain variations in the soil of source region, pathways of air mass, and meteorological condition. For the enhanced study, those factors should be combined with the features of Asian Dust resolved from this study.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2004년도 제20회 발표논문집
• /
• pp.15-24
• /
• 2004

The Seokgatap pagoda composed of mainly alkali granite and other minor pink-feldspar granite, fine-grained granite, granodiorite, diorite, gabbro, and tuff. Despite the small loss and damage derived from joints, its peel-off and exfoliation are serious enough to cause the heavy deterioration on the stone surface. The chemical and petrological weathering has partly replaced the original rock-forming minerals with clay minerals and iron oxyhydroxides. Based on the petrogenesis, rock materials of the pagoda is very similar to rocks of Dabotap pagoda and the Namsan granite in the Gyeongju. The central fart of the pagoda has sunken highly, which caused all the corners to split and the structural transformation to become worse. The reverse V-shaped gaps between the materials have broken stones filled in a coarse way. The iron plates inserted between the upper flat stone laid on other stones and tile pagoda body in the north and east side has been exposed in the air and corroded, discoloring of the adjacent stones. The overall diagnosis of the Seokgatap pagoda is the deteriorated functions of the stone materials, which calls for a long-term monitoring and plans to reinforce the stone surfaces. But the main body including the pagoda roof stone needs washing on a regular basis, and the many different cracks should be fixed with glue by using the fillers or hardeners designed for stone cultural properties after removing the cement mortar. In case of the replacement of the stone materials with new stones, it's necessary to examine the pagoda for the center of gravity and support intensity of the materials. The structural stability of the pagoda can be attained by taking a reinforce measure in geotechnical engineering and making a drainage. The ground humidity, which has aggravated weathering and structural instability, should be resolved by setting up a humidity reduction facility. The contamination of lichens and bryophyte around the pagoda and on the surface is serious. Thus biochemical treatments should be given too in order to prevent further biological damages and remove the vegetation growing on the discontinuous planes.

• 한국가스학회지
• /
• 제21권6호
• /
• pp.52-60
• /
• 2017

반도체 제조공정 중 확산공정 배기라인에 "반응 부산물인 $ZrO_2$와 TEMAZ, TMA, $O_3$ 등 미반응 물질"과 "퇴적되어 있는 분체"를 제거하여 배관 내 운송효율을 높이고자 히터 자켓을 사용하여 배관온도를 $80^{\circ}C$이상으로 올리던 중 진공펌프 후단의 신축배관이 파열되는 사고가 발생하여 사례연구를 진행하였고 사례연구를 통해 동일한 사고가 발생하는 것을 예방하고자 한다. 사고원인을 분석해보면 진공펌프 흡입 측의 틈새발생으로 외부 공기 배관유입과 히터 자켓으로 배관을 가열함으로서 미 반응된 TEMAZ가 분해되어 발생하는 가스의 부피팽창으로 배관 내 과압이 발생하였고 배관 중에서도 가장 취약한 벨로우즈에서 파열된 것으로 추정할 수 있다. 이와 같은 사고를 예방하기 위하여 배관파열사고의 원인물질로 추정되는 TEMAZ에 대한 물리적 위험성을 평가하여 배관파열사고의 원인을 규명하고 동종재해를 예방하기 위한 안전대책을 수립하고자 하는데 목적이 있다.