• Korean Journal of Agricultural Science
• /
• v.40 no.4
• /
• pp.325-331
• /
• 2013

This experiment has been carried out to determine optimal culture conditions for the production of cut flowers and tubers of Calla (Zantedeschia 'Golden Affair' and 'Black Magic') in highlands. Treatments consisted of various levels of root zone environments, Results are as follows: Calla 'Golden Affair' were grown with different mulching materials such as Non-mulching, Black film, reflective film, Rice hull. Mulching materials resulted in no difference in the number of cut flowers but flower length was highest in reflective film. Calla 'Black Magic' were treated with various soil water content, soil type and watering time. Number of cut flowers and flower quality were greatest when the plants were watered at -80 kPa soil water content. No symptoms of soft rot (Erwinia carotovora) was observed at this soil water content. The occurrence of soft rot was observed with similar percentage according to soil type and the soil water content. When Calla 'Black Magic' were watered at the time of soil surface drying, growth was greater compared to others. Air temperature and PPF affected plant growth and photosynthesis. Photosynthetic rate was greatest at $25^{\circ}C$ and PPF $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, while lowest at $28^{\circ}C$ and PPF $800{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. Soft rot did not occur without regard to dipping treatment (0, 5, 10, 24, 48 hours) when the day and night temperature were maintained at $25^{\circ}C$ and $20^{\circ}C$, respectively.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.3
• /
• pp.63-71
• /
• 2014

We analyze the execution time of Reed-Solomon coding, which is the MAC-layer forward error correction scheme used in CDMA2000 1xEV-DO broadcast services, under different air channel conditions. The results show that the time constraints of MPEG-4 cannot be guaranteed by Reed-Solomon decoding when the packet loss rate (PLR) is high, due to its long computation time on current hardware. To alleviate this problem, we propose three error control schemes. Our static scheme bypasses Reed-Solomon decoding at the mobile node to satisfy the MPEG-4 time constraint when the PLR exceeds a given boundary. Second, dynamic scheme corrects errors in a best-effort manner within the time constraint, instead of giving up altogether when the PLR is high; this achieves a further quality improvement. The third, video-aware dynamic scheme fixes errors in a similar way to the dynamic scheme, but in a priority-driven manner which makes the video appear smoother. Extensive simulation results show the effectiveness of our schemes compared to the original FEC scheme.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.276-276
• /
• 2017

This study was examined to establish a conditions for producing Tteokbokki using dry-milling rice flour which can save manpower and labor time. Since the cost of producing rice flour milled in a wet condition is 500 to 700 won/kg, which is more than twice as much as that of 300 won wheat flour, it is necessary to directly make rice flour from raw rice. The dry-milling rice flour used in the experiment was produced by Air mill (Nara machinary co. ltd., Tokyo, Japan) from 5 rice cultivars (Samkwang, Dasan-1, Boramchan, Seolgaeng, Hanareum-2), which were cultivated in A-san in 2015 year. Their particle sizes were 50, 100 and $150{\mu}m$ for each cultivar, respectively. A control was a wet-milled rice flour milled with a roll mill after the rice was soaked in water for 4 hours. The moisture content of dry-milling rice flour based on cultivars was 11 ~ 12%, and added water up to 50~55% of dry-milling rice flour weight. The RVA characteristic of peak viscosity was the highest in Dasan-1 and Hanareum-2, the lowest in Seolgaeng. The setback value used as an indicator of aging was the highest in Dasan-1, therefore Dasan-1 was expected to be quick solidification, resulting in the low tendency of sensory evaluation. The damaged starch was high in Dasan-1 and Boramchan (p<0.05) compared to others. The Hunter color L were no significant among cultivars and b value increased in all cultivars of dry-milling rice flour compared with control. The hardness of dry-milling rice flour was higher than that of the control, especially Dasan-1 and Hanareum-2 were the highest. Based on the sensory evaluation, the best cultivars were Boramchan, Hanareum-2 and Samkwang. The overall preference of dry-milling rice flour was good in particle size of 50~100um.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.69-69
• /
• 2017

Due to the lack in storage facility, considerable amount of rice is stocked in the open air, which causes increased stale flavor and deteriorates palatability and merchantable quality. Lipoxygenase-3(LOX-3) is involved in the production of volatile constituents in stored rice, and the development of stale flavor is delayed in LOX-3 null rice. LOX activity in the rice grain is localized in bran fraction and the tropical Japonica cultivar 'Dawdam' was reported that the absence of LOX-3 is inherited as a simple recessive trait. Also, it was reported that the peroxidation of unsaturated fatty acids occurs at lower levels in the 'Dawdam' bran fraction during storage than in rice varieties with LOX-3. This study was conducted to develop LOX-3 null rice lines using 'Dawdam' and investigate changes of physicochemical properties of the lines stored at different storage temperatures and periods. So we analyzed texture, toyo glossiness value, germination rate and lipoxygenase activity of 15 LOX-3 null rice lines on the condition of which rough rice had been stored at different temperatures (high temperature condition at $35^{\circ}C$ and low temperature condition at $15^{\circ}C$ for 4months. Hardness and stickiness of the lines tendered to be increased when it was stored at high temperature and adhesiveness, springiness, cohesiveness and chewiness was not considerably different according to storage temperatures and periods. The germination rate of HR29062-B-98-2-1-B among LOX-3 null rice lines was higher than another lines, 99.3, 94.0% after 4months stored at low temperature and high temperature, respectively. The lipoxygenase activity was 3,304, 1,601unit/mg protein after 4months stored at low temperature and high temperatures, respectively. So, it is thought that this line will be useful to breed rice varieties with high storability after tested on agricultural traits.

• International Journal of Highway Engineering
• /
• v.3 no.4 s.10
• /
• pp.93-103
• /
• 2001

This study focused on the field applicability evaluation of SB latex-modified concrete (LMC) for concrete bridge deck overlay using mobile mixer. The main experimental factors were water-cement ratio(31, 33, 35 37%), latex contents(0, 5, 10, 15, 20%), and fine aggregate ratio(55, 56, 57, 58%) in order to evaluate the workability, mechanical properties, and durability property of LMC. The slump loss, air content, compressive and flexible strength tests were used to evaluate LMC workability and strength properties. Also, the rapid chloride permeability test was used to evaluate the relative permeability of LMC. As a results, the LMC with enough workability and good quality was produced when it was mixed in field using mobile mixer, satisfying the target compressive strength and flexural strength. The required water-cement ratio of LMC for same workability when mixing with mobile mixer was less than that when mixing in laboratory. Increasing the amount of latex produced concrete with increased flexural strength by mobile mixer. The required cement-water ratios for same initial $19{\pm}3cm$ slump were 37% and 33% at laboratory and mobile mixer, respectively. The mobile mixer was accurately calibrated satisfying the required specification.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.3
• /
• pp.213-232
• /
• 2009

This document was prepared to review and summarize the analytical methods for airborne and bulk asbestos. Basic principles, shortcomings and advantages for asbestos analytical instruments using phase contrast microscopy(PCM), polarized light microscopy(PLM), X-ray diffractometer (XRD), transmission electron microscopy(TEM), scanning electron microscopy(SEM) were reviewed. Both PCM and PLM are principal instrument for airborne and bulk asbestos analysis, respectively. If needed, analytical electron microscopy is employed to confirm asbestos identification. PCM is used originally for workplace airborne asbestos fiber and its application has been expanded to measure airborne fiber. Shortcoming of PCM is that it cannot differentiate true asbestos from non asbestos fiber form and its low resolution limit ($0.2{\sim}0.25{\mu}m$). The measurement of airborne asbestos fiber can be performed by EPA's Asbestos Hazard Emergency Response Act (AHERA) method, World Health Organization (WHO) method, International Standard Organization (ISO) 10312 method, Japan's Environmental Asbestos Monitoring method, and Standard method of Indoor Air Quality of Korea. The measurement of airborne asbestos fiber in workplace can be performed by National Institute for Occupational Safety and Health (NIOSH) 7400 method, NIOSH 7402 method, Occupational Safety and Health Administration (OSHA) ID-160 method, UK's Health and Safety Executive(HSE) Methods for the determination of hazardous substances (MDHS) 39/4 method and Korea Occupational Safety and Health Agency (KOSHA) CODE-A-1-2004 method of Korea. To analyze the bulk asbestos, stereo microscope (SM) and PLM is required by EPA -600/R-93/116 method. Most bulk asbestos can be identified by SM and PLM but one limitation of PLM is that it can not see very thin fiber (i.e., < $0.25{\mu}m$). Bulk asbestos analytical methods, including EPA-600/M4-82-020, EPA-600/R-93/116, OSHA ID-191, Laboratory approval program of New York were reviewed. Also, analytical methods for asbestos in soil, dust, water were briefly discussed. Analytical electron microscope, a transmission electron microscope equipped with selected area electron diffraction (SAED) and energy dispersive X-ray analyser(EDXA), has been known to be better to identify asbestiform than scanning electron microscope(SEM). Though there is no standard SEM procedures, SEM is known to be more suitable to analyze long, thin fiber and more cost-effective. Field emission scanning electron microscope (FE-SEM) imaging protocol was developed to identify asbestos fiber. Although many asbestos analytical methods are available, there is no method that can be applied to all type of samples. In order to detect asbestos with confidence, all advantages and disadvantages of each instrument and method for given sample should be considered.

• Journal of Korean Society of Transportation
• /
• v.33 no.5
• /
• pp.449-460
• /
• 2015

The reliability of air quality evaluation results for green transportation could be improved by applying correct emission factors. Unlike previous studies, which estimated emission factors that focused on vehicles in laboratory experiments, this study investigates emission factors according to road types and time using real driving data. The real driving data was collected using a Portable Activity Monitoring System (PAMS) according to road types and time, which it compared and analyzed fuel consumption from collected data. The result of the study shows that fuel consumption on national highway is 17.33% higher than the fuel consumption on expressway. In addition, the average fuel consumption of peak time is 4.7% higher than that of non-peak time for 22.5km/h. The difference in fuel consumption for road types and time is verified using ANOCOVA and MANOVA. As a result, the hypothesis of this study - that fuel consumption differs according to road types and time, even if the travel speed is the same - has proved valid. It also suggests correction factor of emission factors by using the difference in fuel consumption. It is highly expected that this study can improve the reliability of emissions from mobile pollution sources.

• Journal of Food Hygiene and Safety
• /
• v.19 no.2
• /
• pp.74-83
• /
• 2004

Raw-fish food contains a lot of moisture and is a high-protein food. It is a first-stage processed food taking a lot of manual work. Therefore, it is classified as a PHF food, very liable to cause a bacterial food-poisoning. But its manufacturers are usually small-sized and a systematic sanitation management is difficult to expect. But the manufacturer participating in this study produces chilled fresh raw-fish food. Fish are sliced into two fillets, which are packaged under vacuum, kept and distributed in refrigerators, and sold within a day. It is a newly-developed kind of raw-fish food, and a more improved kind of raw-fish food making possible a systematic sanitation management. The HACCP (Hazard Analysis and Critical Control Point) is a systematic and continuous process-control method which is very efficient for controling food sanitation and reducing the expenses. A new HACCP model has been developed to be applied to a large-sized chilled fresh raw-fish food manufacturer. To ascertain its efficiency, the baterial examination was done to its workplace and products. The significance test was done on its data by "SPSS 12.0 for Window" and "Mann-Whitney U Test". The numbers of bacteria on its final products were significantly different in flatfish and porgy. The number of bacteria tended to decrease in each time-differential sampling (P＜.00l). The final food products showed no food-poisoning bacteria in all the time-differential tests and in all the samplings, which proves that the CCP of the HACCP system is under control. After the SSOP program was applied, no pathogenic bacteria were found in the work-place, and the kinds and numbers of bacteria decreased. The numbers of general bacteria and colon bacilli also showed a significant difference from those before the SSOP program in the filleting board (P＜.05), in the skinning board (P＜.0l), in the neck-removing knife (P＜.05), and in the filleting knife (P＜.01). The working equipments, periodically disinfected, also showed a significant difference in sanitary conditions (in the dehydrator, P＜.05). The number of bacteria found on the food-touching surface was within the standard (below 500/l00 cm$^2$) After the SSOP program was applied, the general bacteria and colon bacilli were not found. The quality of water used in the food processing was also within the standard. The numbers of bacteria falling from the air in the work-place were negligible in all the samplings (＜30CFU/l000ι). The staphylococci and fungi were not found.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.1-10
• /
• 2012

Mobility and quality of service (QoS) are becoming the more important issues in wireless communications. The traditional Internet service is expanding into new access media and applications. Since wireless communication services are accompanied by frequent handovers at remote sites, scalable and fast handover has become a prerequisite for ubiquitous communication. In this paper, the differentiated service (Diffserv) model is deployed in heterogeneous proxy mobile IPv6 (PMIPv6) networks to satisfy the QoS guaranteed service and fast handover requirements. The operational procedures for QoS guaranteed global roaming are presented. In addition, QoS management and handover cost evaluation schemes based on a mobile host's movement scope are proposed. This paper analyzes the reduction in handover delay in a network-based localized mobility management framework. We propose and analyze a PMIPv6 optimized with a global mobile access gateway (G-MAG), which is a network-based entity, to further improve the handover performance in terms of handover delay while maintaining minimal signaling overhead in the air interface among converged heterogeneous wireless networks. The handover signaling procedures with host-based MIPv6 are compared with network-based proxy MIPv6 (PMIPv6) and fast PMIPv6 assisted by G-MAG to show how much handover delay reduction can be achieved. Analytical results show that the handover delay is significantly reduced.

• Journal of Environmental Health Sciences
• /
• v.32 no.5 s.92
• /
• pp.404-411
• /
• 2006

이 연구의 목적은 유치원에서 총 휘발성 유기화합물의 농도를 평가하고, 총 휘발성 유기화합물 농도와 대표적인 8개 방향족 화합물의 상관관계를 조사하는데 있다. 도시에 위치한 11개 유치원의 실내와 실외에서 각각 30개, 11개의 지역시료를, 시골에 위치한 4개 유치원에서는 각각 10개, 4개의 시료를 테낙스 튜브를 이용하여 오전에 1-2시간 채취하였다. 채취한 시료는 열탈착하여 가스크로마토그래피-질량분석기로 분석하였다. 13가지 물질을 각각의 표준물질로 개별 정량하여 이중 빈번히 발견되는 8가지 방향족 유기화합물은 상관관계 평가에 사용하였다. 총 휘발성 유기화합물은 톨루엔을 기준으로 정량하였다. 도시에 위치한 유치원 실내의 총 휘발성 유기화합물 농도가 높았고, 조사 건수의 50%가 환경부 및 교육인적자원부의 가이드라인($400{\mu}g/m^{3}$)을 초과하였다. 도시지역의 유치원 실내 및 실외의 기하평균은 각각 $387.9{\mu}g/m^{3}$과 $134.9{\mu}g/m^{3}$이었고, 시골지역 유치원에서는 각각 $189.6{\mu}g/m^{3},;74.4{\mu}g/m^{3}$이었다. 톨루엔, 크실렌, 에틸벤젠, 정량한 유기 화합물 총합, 총 휘발성 유기화합물은 기하정규분포를 하였다. 벤젠, 톨루엔, 에틸벤젠, 크실렌(BTEX)은 도시에 위치한 유치원에서 농도도 높고, 총 휘발성 유기화합물중 함량도 높았고, 시골지역에서는 농도와 상대적 함량이 낮았다. 도시지역에서는 총 휘발성 유기화합물 중 BTEX의 비중이 25.2%였고 정량한 13가지 유기화합물 중에서는 35.6%를 차지하였다. BTEX 각각 개별물질은 미국 환경보호청이 제시하는 일일 노출 기준량(Reference Concentration; RfC) 보다는 현저히 낮았다. 총 휘발성 유기화합물읜 농도는 실내가 실외 보다 높았다(I/O ratio 2.5). BTEX의 상대적 함량도 실내가 실외보다 높아 실내에도 발생원이 있음을 암시하고 있다. 자료 분석결과 유치원 실내의 벤젠은 실외로부터 유입되고 있었고, 톨루엔, 에틸벤젠, 크실렌은 실외뿐 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.