• 한국자동차공학회논문집
• /
• 제5권6호
• /
• pp.128-140
• /
• 1997

A new super compact condenser(SCC), which has been developed recently is especially suitable for an alternative refrigerant HFC-134a due to its high performance and compactness. The SCC is composed of two pipe headers, baffles, narrow multi-rectangular channels, and louvered fin arrays. Alternating inlet and outlet by the inserted baffles in pipe headers guide refrigerant to and from the narrow multi-rectangular channels. Since the flow rate and its lengh are changed depending on the number and location of baffles, the corresponding pressure drop and heat transfer rate are changed. The present study aims to theoretically and experimentally investigate the effects of baffle location and its number on the pressure drop and thermal performance of the SCC with 40 multi-rectangular channels. The results show that the present method provides an acceptable prediction of pressure drop and heat transfer rate for a 4 pass SCC. However, the model significantly under predicts the performance of a 3 pass SCC, which may be attributed to the phase separation of refrigerant flowing through header pipes. Pressure drop is more signifi- cantly influenced than heat transfer rate by the baffle location.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1042-1046
• /
• 2008

Both the weighing bridge and the diverter system is a important component in achieving a high accuracy liquid flow rate standard using a static gravimetric method. The weighing bridge is a tank which weighing collected flow with a load cells. The diverter is a moving device used to direct flow alternately along its normal course(by pass) or towards the weighing tank. The time needed for collection into the weighing tank is measured using a timer. So it is important to the diversion period is sufficiently fast and triggering point of timer which is determined the filling time. On this studies show that the measurement deviation of load cell and uncertainty of diverter system for changing diversion speed and triggering point was estimated in accordance with Guide to The Expression of Uncertainty in Measurement(ISO).

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.563-568
• /
• 2008

The Green Building Certification is issued through self-assessment of applicant, assessment of assessment members and deliberation committee members. These assessments are carried out based on a standard provided Ministry of land transport and maritime affairs and environment. However, opinion difference of assessment standards could be occurred due to diversity of understanding for a standard or subjectivity of committee member. In this paper, We discussed the primary cause of score difference after analyzed assessment standard for the site, transportation, energy and resources, ecological environment, indoor environment in five different Apartment Houses located in Seoul. At a result, score difference was at least 3 points in each section except indoor environment and total score difference of housing complex is by 10 points. To improve these problems, educational program should be activated and guide for assessment standard should be published.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.905-911
• /
• 2009

The viscosity drive method by the wheel which is widely used in the conventional railway systems needs a large friction force between the wheel and the guide-rail, which brings on a thrust force for a quick acceleration and a high-speed travelling. In addition, the viscosity drive method needs an increase of the vehicle weight for a large friction force. However, a maglev train is possible to be driven by the electro-magnet instead of the wheel, which produces a levitation and thrust force without any contact. In general, low-speed maglev train uses a linear induction motor(LIM) for propulsion that is operated under 300[km/h] due to the power-collecting and end-effect problems of LIM. In case of high-speed maglev train, a linear synchronous motor(LSM) is more suitable than LIM because of a high-efficiency and high-output properties. LSM has a driving principle as same as a conventional rotary synchronous motor(RSM), and the torque of RSM becomes the thrust force of LSM. A conventional LSM has relatively large air-gap compared with a conventional RSM. So, it must be achieved a design that is considered normal force by finite-asymmetric structure, end-effect on the entry and exit part, and support structure of a moving part. Therefore, in this research, authors accomplish a conceptualizing and basic design of a small-scaled LSM, and characteristics analysis using FEM.

• Korean Chemical Engineering Research
• /
• 제43권2호
• /
• pp.222-229
• /
• 2005

공기 중의 이산화탄소가 10% 함유된 연소가스를 5단의 다단 농축 막분리 시스템을 이용하여 분리하는 것을 Aspen plus와 Excel을 이용하여 모사하였다. 분리된 이산화탄소의 농도는 99% 이상, 이산화탄소 제거 효율을 90% 이상으로 하였다. 이때 최적화 변수를 각 단의 압력, 각 단에서의 잔여물 농도로 하였고 각 단의 막 면적의 합과 막 분리시스템의 장치비와 운전비를 고려한 목적함수를 제안하여 최적화를 행하였다. 최적화 결과, 기존 설계에 비해 막 면적 및 총괄 소요비용을 절감할 수 있었으며, 이를 바탕으로 다단농축 막분리 시스템의 설계지침을 얻었다.

• 제어로봇시스템학회논문지
• /
• 제15권9호
• /
• pp.894-898
• /
• 2009

In a post printing section of roll to roll printing systems, scratch problem is the major defects. The functional qualities such as conductivity, mobility could deteriorate because of the scratch defect. In general, the scratch of the printed pattern on the flexible substrate was induced from a contact between rolls and printed pattern in the post printing section. In this paper, for non-contacting transfer of a moving web, a mathematical tension model has been developed considering strain due to air floatation and the proposed mode has been validated by numerical simulation. Additionally, the correlation between floatation height and speed compensation to control the tension and register are investigated. On the basis of the proposed model, a guide line of speed control in R2R printing system is presented to guarantee the non-contact between rolls and R2R printed pattern on the flexible substrate.

• 디지털융복합연구
• /
• 제9권2호
• /
• pp.141-152
• /
• 2011

오늘날 데이터센터는 비즈니스에서 핵심영역으로 인식되고 있으며, 이들에 대한 많은 서비스 요구는 보다 많은 에너지 소비를 낳고 있다. 따라서 데이터센터의 높은 수준의 에너지 효율성은 구축, 운영, 폐기 등 그들의 생명주기에 있어서 핵심이슈로 등장하였다. 본 연구에서는 이러한 생명기상에서 데이터센터의 그린화 수준을 진단할 수 있도록 성숙도모델에 기초한 그린데이터센터 수준진단모델을 제시한다. 본 연구에서 제시한 수준진단 모델은 엑션추어 GMM, DCEEF 등 기존 에너지평가모델 및 그린데이터센터 성숙도평가 모델을 참조하였으며, 최종적으로 건축, 공조, 전기, IT, 조직 등 데이터센터의 5개 핵심영역에 대한 진단지표를 제안하였다.

• 한국자기학회지
• /
• 제9권1호
• /
• pp.48-54
• /
• 1999

자기부상형 리니어 모터와 비접촉 구동에 의한 크린룸 환경용 물류 운송장치를 개발하기 위하여 접촉 없이 완전하게 부상되는 자기부상레일을 개발하고자 하였다. 영구자석의 같은 극을 마주보게 배치할 때 생성되는 작용력에 의한 부상 특성을 파악하고, 해석을 통하여 외력 변화에 강인하고 부상위치의 변화가 작은 반발부상형 레일을 설계·제작하였다. 개발된 부상 레일은 고정자석 양면에서 서로 반발되게 자석을 배열하여 부상하는 구조로 상호 반발력에 의하여 평형이 이루어지기 때문에 부상체에는 횡력만 작용하게 된다. 부상계에서 발생되는 횡력은 부상체의 부상 중심 위치에 반발력을 이용한 보조자석을 설치하여 제어하고자 하였다.

• 한국실내디자인학회논문집
• /
• 제15권3호
• /
• pp.48-55
• /
• 2006

A sustainable building must produce an interior environment that is safe, healthy, comfortable and supportive of human performance and well-being. The medical human comfort: performance and productivity cost of unhealthy environment may cause much cost for healing. Research that buildings with daylight, fresh air, eco-materials and sustainable interior design are consistently rated as more comfortable and occupants performance, satisfaction and health. This study is to categorize systematically interior environmental design elements for improving sustainability with a view to developing an evaluation model of super high-rise apartment unit plans. With a literature survey and design guide lines concerning sustainable design elements, three hierarchical categorization levels of human, environment, energy and resources systems that consists of upper, middle, low design elements have been proposed. A total of 6 items have been suggested for middle level of categorization and 24 items for lower level. Finally a total of 107 design elements concerning the 24 items and their relationahips have been revealed. The needs for a systematic approach to interior environmental design for sustainability have been discussed.

• 동력기계공학회지
• /
• 제9권3호
• /
• pp.50-57
• /
• 2005

A cross-flow fan is strongly influenced by the various design factors of a rear-guider and a stabilizer. The purpose of this paper is to investigate the effects of a rear-guider and a stabilizer on the surface pressure of a rear-guider in an indoor room air-conditioner using a cross-flow fan. The design factors considered in this paper are a rear-guider clearance, a stabilizer clearance, and a stabilizer setup angle, respectively. The operating condition of a cross-flow fan was controlled by changing the static pressure and flowrate using a fan tester. All surface pressures of a rear-guider are differently distributed according to the stabilizer setup angle, and show a zero value in the flow coefficient, ${\Phi}{\fallingdotseq}0.5$ only of a stabilizer setup angle, $45^{\circ}$. Especially, they show a big negative value in the expansion angle larger than $34^{\circ}$ regardless of a rear-guider clearance, a stabilizer clearance, and a stabilizer setup angle. On the other hand, surface pressures for various stabilizer cutoff clearances are better than those for various rear-guider clearances.