• 마이크로전자및패키징학회지
• /
• 제19권3호
• /
• pp.43-48
• /
• 2012

마이크로파 유전체의 비유전율 측정에 널리 사용되고 있는 post resonator 기법에서 시편의 형상과 기구물의 편차 등에 의해서 발생하는 비유전율 계산의 오차요인에 대해 시뮬레이션과 시편 실측을 통해 분석하였다. HFSS 시뮬레이션을 통하여 post resonator 측정 기구물에 놓여진 유전체(유전율 38) 디스크의 $S_{21}$ 파라메터 스펙트럼을 계산하고 $TE_{011}$ 모드 공진주파수로부터 비유전율을 계산하였다. 시편의 형상비(직경D/높이H)가 0.8~1.6 사이로 변화함에 따라 계산되는 비유전율 값의 오차는 약 0.3% 이내로 미미하였다. 시편과 상하부 도체 사이에 1~10% 정도의 공극이 존재할 경우, 비유 전율은 1~10% 정도의 높은 수준으로 오차가 발생하였다. 시편이 중심부에서 벗어나서 위치하는 것은 비유전율 측정에 오차를 유발하지 않았다. 이러한 시뮬레이션 결과는 제작 샘플의 실제 측정을 통해 유사한 경향성을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.306.1-306.1
• /
• 2016

ZnO semiconductor material has been widely utilized in various applications in semiconductor device technology owing to its unique electrical and optical features. It is a promising as solar cell material, because of its low cost, n-type conductivity and wide direct band gap. In this work ZnO/Si heterojunctions were fabricated by using pulsed laser deposition. Vacuum chamber was evacuated to a base pressure of approximately $2{\times}10^{-6}Torr$. ZnO thin films were grown on p-Si (100) substrate at oxygen partial pressure from 5mTorr to 40mTorr. Growth temperature of ZnO thin films was set to 773K. A pulsed (10 Hz) Nd:YAG laser operating at a wavelength of 266 nm was used to produce a plasma plume from an ablated a ZnO target, whose density of laser energy was $10J/cm^2$. Thickness of all the thin films of ZnO was about 300nm. The optical property was characterized by photoluminescence and crystallinity of ZnO was analyzed by X-ray diffraction. For fabrication ZnO/Si heterojunction diodes, indium metal and Al grid patterns were deposited on back and front side of the solar cells by using thermal evaporator, respectively. Finally, current-voltage characteristics of the ZnO/Si structure were studied by using Keithly 2600. Under Air Mass 1.5 Global solar simulator with an irradiation intensity of $100mW/cm^2$, the electrical properties of ZnO/Si heterojunction photovoltaic devices were analyzed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.157.1-157.1
• /
• 2016

In this work, we experimentally investigated the solar absorption performance of Cu-based scalable nanostructured surfaces and compared their performance with the conventional TiNOX. We fabricated Cu-based nanostructured surfaces with a controlled chemical oxidation process applicable to a large area or complex geometry. We optimized the process parameters including the chemical compounds, dipping time and process temperature. We conducted both lab-scale and outdoor experiments to characterize the conversion efficiency of each absorber surfaces with single and double glazing setup. Lab-scale experiment was conducted with $50mm{\times}50mm$ absorber sample with 1-sun condition (1kW/m2) using a solar simulator (PEC-L01) with measuring the temperature at the absorber plate, cover glass, air gap and ambient. From the lab-scale experiment, we obtained ${\sim}91^{\circ}C$ and $94^{\circ}C$ for CuO and TiNOX surfaces after 1 hr of solar illumination at single glazing, respectively. To measure the absorber performance at actual operating condition, outdoor experiment was also conducted using $110mm{\times}110mm$ absorber sample. We measured the solar flux with thermopile detector (919P-040-50). From outdoor experiment, we observed ${\sim}123^{\circ}C$ and $131^{\circ}C$ for CuO and TiNOX with 0.6 kW/m2 insolation at double glazing, respectively. We showed that the suggested nanostructured CuO solar absorber has near-equivalent collection efficiency compared with the state-of-the-art TiNOX surfaces even with much simpler manufacturing process that does not require an expensive equipment.

• Radiation Oncology Journal
• /
• 제1권1호
• /
• pp.29-36
• /
• 1983

The treatment of tumors along curved surfaces with stationary electron beams using cone collimation may lead to non-uniform dose distributions due to a varying air gap between the cone surface and patient. For large tumors, more than one port may have to be used in irradiation of the chest wall, often leading to regions of high or low dose at the junction of the adjacent ports. Electron-beam arc therapy may elimination many of these fixed port problems. When treating breast tumors with electrons, the energy of the internal mammary port is usually higher than that of the chest wall port. Bolus is used to increase the skin dose or limit the range of the electrons. We invertiaged the effect of various arc beam parameters in the isodose distributions, and combined into a single arc port for adjacent fixed ports of different electron beam eneries. The higher fixed port energy would be used as the arc beam energy while the beam penetration in the lower energy region would be controlled by a proper thickness of bolus. We obtained the results of following: 1. It is more uniform dose distribution of electron to use rotation than stationary irradiation. 2. Increasing isocenter depth on arc irradiation, increased depth of maximum dose, reduction in surface dose and an increasing penetration of the linear portion of the curve. 3. The deeper penetration of the depth dose curve and higher X-ray background for the smaller field sized. 4. If the isocenter depth increase, the field effect is small. 5. The decreasing arc beam penetration with decreasing isocenter depth and the isocenter depth effect appears at a greater depth as the energy increases. 6. The addition of bolus produces a shift in the penetration that is the same for all depths leaving the shape of the curves unchanged. 7. Lead strips 5 mm thick were placed at both ends of the arc to produce a rapid dose drop-off.

• 대한전자공학회논문지TC
• /
• 제43권6호
• /
• pp.46-52
• /
• 2006

본 논문에서는 70-nm metamorphic high electron mobility transistor (MHEMT)와 W-band 마이크로 머시닝 링 커플러를 이용하여 낮은 변환손실 및 높은 격리특성의 94 GHz MMIC 믹서를 설계 및 제작하였다. 놀은 LO-RF 격리도 특성을 얻기 위하여 마이크로 머시닝 링 커플러를 사용한 새로운 3차원 구조의 resistive 믹서 구조를 제안하였다. 제작된 93 GHz MMIC 믹서는 94 GHz에서 8.9 dB의 낮은 변환 손실과 29.3 dB의 높은 LO-RF 격리돈 특성을 나타내었다. 본 논문에서 제안된 믹서는 기존의 보고된 W-band 대역 믹서와 비교하여 양호한 변환 손실 뿐 만 아니라 우수한 LO-RF 격리도 특성을 나타내었다.

• 전력전자학회논문지
• /
• 제11권5호
• /
• pp.409-416
• /
• 2006

LLT 변압기 적용 LLC 직렬공진컨버터의 동작특성에 대해 설명하였다. 본 논문에서는 1차측 권선과 2차측 권선을 분리하고, 변압기 중간에 공극(Air-Gap)을 삽입한 일체화된 LLT 변압기를 적용하였다. 이와 같이 적용된 LLT 변압기의 경우 1차측 누설인덕턴스만이 증가되는 것이 아니고 2차측 누설인덕턴스 또한 증가되게 된다. 이렇게 증가된 2차측 누설인덕턴스는 전압이득 특성곡선에 있어 LLC 직렬공진컨버터에 적용한 변압기를 사용한 경우보다 전체적으로 높은 전압이득 특성을 가지게 된다. 따라서 본 논문에서는 2차측 누설인덕턴스를 고려한 일체화된 LLT 변압기적용 LLC 직렬공진컨버터에 대해 이론적으로 해석하고 시뮬레이션 하였으며, 400W급 시제품을 제작하여 실험한 결과에 대해 서술하였다.

• 한국정밀공학회지
• /
• 제26권3호
• /
• pp.25-31
• /
• 2009

Femto-second laser ablation with the various feed velocities of the Invar alloy and the micro surface milling for the processing condition were studied. We used a regenerative amplified Ti:sapphire laser with a 1kHz repetition rate, 184fs pulse duration time and 785nm wavelength. Femto-second laser pulse was irradiated on the Invar alloy with the air blowing at the condition of various laser peak powers and feed velocities. An ablation characteristic according to feed velocity of the Invar alloy was appeared as the non-linear type at different zone of energy fluence. The micro surface milling of the Invar alloy using a mapping method was investigated. The optimal condition of micro surface milling was laser peak power of 22.8mW, feed velocity of 1 mm/s, beam gap of $1{\mu}m$. With the optimal processing condition, the fine rectangular shape without burr and thermal damage was achieved. Using the femto-second laser system, it demonstrates excellent tool for micro surface milling of the Invar alloy without heat effects and poor edge.

• 한국가스학회지
• /
• 제7권3호
• /
• pp.51-57
• /
• 2003

본 논문에서는 압력용기의 밀봉성과 밀접한 관계를 맺고 있는 O-링 그루브 형상의 온도분포와 변형거동 특성에 대한 연구를 수행하고자 한다. 압력용기에 작용하는 온도는 히터에 의해 가열되고, 압력은 가스 압축기에 의해 가압된다. 결국, 압력용기는 제한된 작업기간동 안 높은 압력과 높은 온도를 유지해야 한다 이러한 작동조건에서 압력용기의 가스는 구형 그루브에 설치된 두 개의 O-링에 의해 대기중으로 누출되지 말아야 한다. 유한요소해석 결과에 의하면, 압력용기의 밀봉성을 확보하기 위해서는 메탈 시일 소재의 열적, 기계적 특성이 대단히 우수해야 한다는 사실을 지적하고 있다 즉, 메탈 시일 소재는 높은 열전도 계수와 낮은 기계적 강도를 유지해야 밀봉성을 유지하는데 유리하다. 이러한 소재는 O-링을 설치하는 구형 그루브의 밀봉간극이나 그루브의 폭을 줄여줄 수 있기 때문에 압력용기의 밀봉특성을 향상시키게 된다.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1278-1292
• /
• 2018

Inductive power transfer (IPT) technology allows for charging of electric vehicles with security, convenience and efficiency. However, the IPT system performance is mainly affected by the magnetic coupling structure which is largely determined by the coupling coefficient. In order to get this applied to electric vehicle charging systems, the power pads should be able to transmit stronger power and be able to better sustain various forms of deviations in terms of vertical, horizontal direction and center rotation. Thus, a novel cross-shaped magnetic coupling structure for IPT charging systems is proposed. Then an optimal cross-shaped magnetic coupling structure by 3-D finite-element analysis software is obtained. At marking locations with average parking capacity and no electronic device support, a prototype of a 720*720mm cross-shaped pad is made to transmit 5kW power at a 200mm air gap, providing a $1.54m^2$ full-power free charging zone. Finally, the leakage magnetic flux density is measured. It indicates that the proposed cross-shaped pad can meet the requirements of the International Commission on Non-Ionizing Radiation Protection (ICNIRP) according to the Australian Radiation Protection and Nuclear Safety Agency (ARPANSA).

• 한국의학물리학회지:의학물리
• /
• 제15권2호
• /
• pp.59-62
• /
• 2004

본 논문에서는 마이크로필름과 탄소막 전극을 이용하여 개발한 소형 방사선측정기의 특성을 평가하였다. 전극은 5 mm 직경의 고전압전극, 3.3 mm 직경의 수집전극, 그리고 넓이가 0.7 mm인 보호전극으로 구성되었으며, 이온수집 공동의 부피는 0.016 ㎤이었다. 6 MV X-선을 이용하여 제작된 측정기에 대한 전기적 특성을 조사하였는데, 누설전류는 0.1 pA, 재현 오차가 0.1% 이하, 선량률 효과는 1.5% 이하, 분극효과는 2.4% 이하로 나타났다. 개발된 측정기의 전기적 특성은 양호한 것으로 평가되며, 추후 깊이선량률, 빔측면도와 같은 선량분포에 대한 특성의 평가가 요구된다.