• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.45 no.2
• /
• pp.85-95
• /
• 2009

The fishing lamp is a fishing gear that gathers fish at night. But the cost of oil, which is used to light fishing lamp, has been risen significantly up to 30-40% of total fishing costs. Therefore it is very urgent to develop an energy economical fishing lamp in order to solve the business difficulties of fisheries. Under this background, this research aims at developing a fishing lamp for squid jigging and hairtail angling fishery using the LED, which has excellent energy efficiency and durability. The LED fishing lamp developed can be controlled to fix a fit direction of fish shoal deep because a fishing lamp can be adjustable up and down directions. One unit of fishing lamp has about an 80Watt capacity and the frame of fishing lamp is made of aluminium to emit generated heat of LED to outside. The LED lamp developed was highly durable, only 5.7% of emitting efficiency decreased for 18 months. The illuminance of a unit LED lamp was 2,070lux at 1m and 21lux at 10 m distance, and the intensity of LED lamp system emitted 2,580lux and 400lux at the respective distances. After development of this fishing lamp, 100 units are installed on operating fishing vessels. Experimental results show that energy consumption of squid jigging and hairtail angling was reduced by 40% and 87%, respectively. In conclusion, our methods showed elevated fishing power, compared with traditional fishing method: 37.7% for squid jigging and 24.5% for hairtail angling.

• Resources Recycling
• /
• v.15 no.2 s.70
• /
• pp.3-9
• /
• 2006

As a basic study on the conversion of molten converter slag to the ordinary portland cement, the effects of $Al_{2}O_{3}$ addition on the interface reaction between solid CaO and molten converter slag has been studied. Alumina added converter slag whose basicity was controlled to 1 and 2 was melted and hold for 30 minutes in MgO crucible at $1500^{\circ}C$. Then sintered CaO pellet heated at the same temperature was dipped into the molten slag and held for 30minutes. After the reaction, the crucible was cooled in air and the specimen was cut off to the horizontal direction of the crucible. The dissolution rate of CaO pellet with the addition of $Al_{2}O_{3}$ was measured by the change of the radius or sintered CaO pellet and the interface layer was observed by SEM/EDX. As a result. At the basicity 2 slag, thickness of created $C_{3}S$ layer increased 3.5 times and quantity of $C_{6}AF_{2}\;or\;C_{4}AF$ phase increase 2 times than baisicy 1 slag.

• Food Science and Preservation
• /
• v.13 no.2
• /
• pp.234-240
• /
• 2006

The purpose of this study was to evaluate microbiologically cooking utensils, equipment employees, and environment in 12 large Korean, Western, Chinese, and Japanese restaurant. Microbiological testing was conducted for pathogens including E. coli, Samolnella, L. monocytogenes, S. aureus, E. coli O157:H7, V. parahaemolyticus, B. cereus, and Y. enterocolitica as well as total plate count and coliforms. The results showed cooking water and drinking water in some Korean restaurants and drinking water in some Western and Japanese restaurants were unsatisfactory, especially, barley tea, which was cooled after being boiled, was unsatisfactory. Most cooking utensils such as knives, cutting boards, kitchen towels, tongs, and basket had total plate and coliforms count in excess of standards, and knives and cutting boards at some Chinese restaurant had E. coli. At some restaurant, S. aureus was found on some food worker's hands. Also, the total plate count of the air showed a high count around worktables, inside the refrigerator, and in the kitchen in most restaurants. These result suggest that sanitation needs improvement in the environments in these foodservice establishment.

• Korean Journal of Materials Research
• /
• v.8 no.11
• /
• pp.1031-1037
• /
• 1998

To investigate the effect of cooling rate and annealing temperature on the corrosion of Zircaloy-4 and Zr-2. 5Nb alloys, autoclave corrosion tests were performed at $500^{\circ}C$ for the specimens prepared by various heat treatments. The specimens were heat-treated at $1050^{\circ}C$ for 30 minutes and cooled by ice-brine quenching, water quenching, oil quenching, air cooling, and furnace cooling. To investigate the effect of annealing temperature, the specimens were annealed at $\alpha$, ($\alpha$+$\beta$)-, and $\beta$-temperatures. It was observed from the $500^{\circ}C$ corrosion test that nodular corrosion occurred on the Zircaloy-4 alloy but did not occur on the Zr-2.5Nb alloy. The corrosion resistance of Zircaloy-4 increased with increasing the cooling rate. On the other hand, the corrosion resistance of Zr-2.5Nb decreased with increasing the cooling rate and the annealing temperature. It is suggested that corrosion resistance of Zircaloy-4 would be controlled by the distribution of Fe and Cr element in the matrix and precipitates, while that of Zr-2.5Nb alloy the niobium concentration and $\beta_{-Nb}$ phase.

• Resources Recycling
• /
• v.25 no.2
• /
• pp.49-59
• /
• 2016

Steel slag is being recycled into industrial by-products for civil generated inevitably in the seasonal course, road and cement raw materials. However, the field of recycling most of the bottom portion is concentrated in the areas that are required to take advantage of the situation in various fields taking advantage of the steel slag. But various studies to take advantage of the steel slag as aggregate for concrete made for limiting slag was a situation that most of the studies are incomplete research on the suitability of as aggregate for concrete practical relates to an expandable suppressed. In this study, the separation of the slag aggregate according to the production methods to assess the feasibility aggregate for concrete aggregates, including through Steel making slag, a total of seven kinds of steel slag aggregate. Studies show that ordinary concrete, steel slag aggregate for aggregate and on the equally to take advantage of grading, chloride content standards such as to what is lacking, although appropriate aggregate of concrete include the deployment of only in special sectors through the combination was assessed to have a very high.

• Resources Recycling
• /
• v.14 no.5 s.67
• /
• pp.13-17
• /
• 2005

As a basic study for recycling molten converter slag as an ordinary portland cement (OPC) by a conversion process, the reaction mechanism and the rate of the formation of $C_4AF$ which is one of the main components of OPC were investigated. The converter slag whose basicity was controlled by adding reagent grade $SiO_2$ was melted and hold for 30 minutes in MgO crucible at $1300^{\circ}C{\sim}1350^{\circ}C$. Then, the sintered CaO pellet heated at the same temperature was dipped into the molten slag and hold for $10{\sim}30$minutes. After the reaction, the crucible was cooled in air and the specimen was cut off to the horizontal direction of the crucible. The dissolution rate of $C_3A$ pellet was measured by the change of radius of the sintered $C_3A$ pellet, and the formed phase of $C_4AF$ was observed by SEM/EDX. As a result, the dissolution rate of $C_3A$ pellet into molten slag was increased from $0.75{\times}10^{-4}(cm/sec)$ at $1300^{\circ}C$ to $1.67{\times}10^{-4}(cm/sec)$ at $1350^{\circ}C$, and the mixed layer of $C_4AF$ and $C_{12}A_7$ was found between slag and $C_3A$ pellet.

• Journal of Korea Foundry Society
• /
• v.43 no.6
• /
• pp.279-285
• /
• 2023

In order to predict the mechanical properties of ductile cast iron heat treated in an intercritical temperature range, samples machined from cast iron with a tensile strength of 450 MPa were heat-treated at various intercritical temperatures and air-cooled, after which a microstructural analysis and Brinell hardness test were conducted. As the heat treatment temperature was increased in the intercritical temperature range, the ferrite fraction in the ductile cast iron decreased and the pearlite fraction increased, whereas the nodularity and nodule count did not change considerably from the corresponding values in the as-cast condition. The Brinell hardness values of the heat-treated ductile cast iron increased gradually as the heat treatment temperature was increased. Based on the measured alloy composition, the fraction of each stable phase and the hardness model from the literature, the hardness of the ductile cast iron heat treated in the intercritical temperature range was calculated, showing values very similar to the measured hardness data. In order to check whether it is possible to predict the hardness of heat-treated ductile cast iron by using the phase fraction obtained from thermodynamic calculations, the volumes of graphite, ferrite, and austenite in the alloy were calculated for each temperature condition. Those volume fractions were then converted into areas of each phase for hardness prediction of the heat-treated ductile cast iron. The hardness values of the cast iron samples based on thermodynamic calculations and on the hardness prediction model were similar within an error range up to 27 compared to the measured hardness data.

• Horticultural Science & Technology
• /
• v.33 no.3
• /
• pp.375-382
• /
• 2015

A controlled atmosphere (CA) regimen was optimized during 3 consecutive harvest seasons as the basis of practical modified atmosphere packaging (MAP) storage for quality maintenance and extension of storage potential of fresh Ligularia fischeri leaves. Leaves were harvested in April or May and forced-air cooled to $4^{\circ}C$ before punch-hole MAP (control, where gas concentrations were same as air) and CA treatments. CA regimens adjusted stepwise during 3 experimental years were: 1 and 3% $O_2$, respectively combined with 5 and 10% $CO_2$ in the first year, 3% $O_2$ fixed in combination with 0, 2.5, and 5% $CO_2$ in the second year, and 3% $O_2$ fixed in combination with 2.5 and 5% $CO_2$ in the third year. In the first year, higher incidence of black discoloration was observed with the reduction of respiration under 10% $CO_2$ CA conditions regardless of $O_2$ levels at 1 or 3%. In the second and third year, the incidence of the disorder seemed not to be clearly relevant to CA conditions showing slightly higher incidence only after 4- or 5-week storage + 5-day shelf life. Although texture and appearance quality were maintained better under the 3% $O_2$ + 2.5% $CO_2$condition after 4-week storage + 5-day shelf life, effects of CA on the extension of storage period was slight. Overall results indicated that Ligularia fischeri leaves are very susceptible to $CO_2$ injury. $CO_2$ concentration should be adjusted below 2.5% for safe and effective CA or MAP storage to maintain quality even during short-term storage.

• Korean Journal of Animal Reproduction
• /
• v.27 no.3
• /
• pp.215-223
• /
• 2003

This study was to investigate the effects of fertilization time and culture medium of pig oocytes matured in-vitro by liquid boar sperm. The sperm rich fraction (30∼60 ml) was slowly cooled to room temperature (20∼23$^{\circ}C$) by 2 h after collection. Semen was transferred into 15 ml tubes, centrifuged at room temperature for 10 min 800 ${\times}$ g, and the supernatant solution was poured off. The concentrated sperm was resuspended with 5 ml of the LEN diluent to provide 1.0${\times}$10$^{9}$ sperm/ml at room temperature. The resuspended semen was cooled in a refrigerator to 4$^{\circ}C$. The medium used for oocyte maturation was TCM-199 supplemented with 26.19 mM sodium bicarbonate, 0.9 mM sodium pyruvate, 10 $\mu\textrm{g}$/ml insulin, 2 $\mu\textrm{g}$/ml vitamin B$_{12}$ , 25 mM HEPES, 10 $\mu\textrm{g}$/ml bovine apotransferrin, 150 $\mu$M cysteamine, 10 IU/ml PMSG, 10 IU/ml hCG, 10 ng/ml EGF, 0.4% BSA, 75 $\mu\textrm{g}$/ml sodium penicillin G, 50 $\mu\textrm{g}$/ml streptomycin sulfate and 10% pFF. After about 22 h of culture, oocytes were cultured without cysteamine and hormones for 22 h at 38.5$^{\circ}C$, 5% $CO_2$ in air. Oocytes were inseminated with liquid boar sperm stored at 4$^{\circ}C$ for 2 days after collection. Oocytes were coincubated for 1, 3, 6 and 9 h in 500 ${mu}ell$ mTBM fertilization media with 1.0${\times}$10$^{6}$ sperm/ml concentration, respectively. Thereafter, oocytes were transferred into 500 ${mu}ell$ NCSU-23, HEPES buffered NCSU-23, PZM-3 and PZM-4 culture media, respectively, for further culture of 6, 48 and 144 h. The rates of sperm penetration and male pronuclear formation were higher in the fertilization times for 6 and 9 h than in those for 1 and 3 h. The rates of cleaved oocytes were higher in the fertilization times for 6 and 9 h (85.0 and 84.6%) than in those for 1 and 3 h (61.1 and 76.8%). The percentage of blastocyst formation from the cleaved oocytes was highest in the fertilization time for 6 h (33.6%) than in that for 1, 3 and 9 h (11.4, 23.0 and 29.6%). Mean cell numbers per blastocyst were 32.9, 27.6, 26.3 and 24.4 in the fertilization times for 6, 9, 3 and 1 h, respectively. The rate of blastocyst from the cleaved oocytes and the number of cells per blastocyst were higher in HEPES buffered NCSU-23 culture medium than in NCSU-23, PZM-3 and PZM-4 culture media. In conclusion, we found out that liquid boar sperm stored at 4$^{\circ}C$ could be used for in-vitro fertilization of pig oocytes matured in-vitro. Also, we recommend the coincubation time of 6 h in 500 ${mu}ell$ TBM fertilization medium with 1${\times}$10$^{6}$ sperm/ml concentration and the HEPES buffered NCSU-23 culture medium for in-vitro fertilization of pig oocytes matured in-vitro.

• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.116-122
• /
• 2011

This study was carried out to investigate the effects of several cooling methods such as water hose cooling, mist, fog and control on growth and microclimate, and to develop a simple nutriculture bed for production of fresh leaves of narrowhead goldenaray 'Ligularia stenocephala'. When the root-zone was cooled with 240 L/hr flow rate of $13^{\circ}C$ ground water using water hose, the temperature was lowered approximately by 2 to $3^{\circ}C$ than that of control. The growth of narrowhead goldenaray were favorable in the water hose cooling compared with the other cooling methods. Nutrient culture system having part cooling effect around plant canopy was developed. The system was composed of 15 cm diameter of water hose on side wall of beds, cooling hose, and expanded rice hull media as organic substrate. When cool water which the temperature changed in the range of 14 to $22^{\circ}C$ diurnally with 240 L/hr of flow rate through water hose, the air temperature around canopy and root-zone temperature were dropped by $0.5^{\circ}C$ and $3^{\circ}C$ compared with that of conventional styrofoam bed, respectively. These results showed that newly devised bed system using water hose was simple and economical for the production of high quality narrowhead goldenaray leaves. This system might be practically used both at summer and winter season for the cultivation of narrow head goldenaray by part cooling or heating around root-zone and plant canopy.