• Journal of Pharmacopuncture
• /
• v.12 no.2
• /
• pp.67-75
• /
• 2009

Objectives : This study was performed to developing orally administered analgesics and locally injected pharmacopuncture analgesics like opioids. Methods : Literary investigation on the origin of poppy (Papaver somniferum L) and other narcotics was conducted to examine the potential of developing orally administered analgesics and locally injected pharmacopuncture analgesics. Opium is a gum-like mass derived from air-dried white fluid of immature fruit of the poppy. Opium contains approximately 20 types of alkaloids including morphine, codeine, thebaine, papaverine and others. Natural opioids and synthetic alkaloid derivatives are the constituents of opioid analgesics and their effects and side-effects depend on the peculiarities of receptors. An extreme caution is required in the selection of proper dosage, proper analgesic types, and indications for successful pain management. Results and Discussion : With the enactment of "Narcotic control protocol", herbs such as cannibis and poppy are no longer available for use by Korean medicine doctors, and these doctors are faced with difficulty in managing severe pain in the clinical environment. A systematic consideration is inevitable for overcoming the limitation on these analgesics.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.69-77
• /
• 2015

The PMV regression analysis was conducted for this model based on a database of the PMV variables. PMV regression model simplification was completed through sensitivity and data analysis. The simplified PMV regression model's and Fanger PMV model was confirmed through MAE and RMSE. And the EMS in EnergyPlus was used to establish a simplified PMV regression analysis-based thermal comfort control. Also, the thermal comfort controls based on simplified PMV model and the Fanger PMV model were applied to the building model, it was confirmed that both controls met the thermal comfort range in more than 90% of cases during the air conditioning period.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.5
• /
• pp.30-44
• /
• 2002

This study is conducted to analyze the change of location and soil characteristics effect on the condition of urban forest in Urban Park and Green Open Space The results of this study are as fallows; 1. Soil acidity is indicated pH 3.88 in Sasang park, pH 4.38 in Hwaji park, pH 4.40 in Daeyeon park, pH 4.68 in Sanseong amusement park, pH 5.15 in Molundae amusement park. 2. Species diversity indices of indicated Sasang park 0.9932, Hwaji park 1.1975, Daeyeon park 1.2160, Sanseong amusement park 1.3080, Molundae amusement park 1.3233 is due to location and soil environment in addition to air pollution effects. 3. The vitality of Pinus thunbergii 27.5ER in Sasang park, 24.9ER in Hwaji park, 24.5ER in Daeyeon park, 23.6ER in Sanseong amusement park, 21.0ER in Molundae park. This shows that tree vitality are impacted by location and soil characteristics. On the basis of the result above, vegetation devices are suggested : 1) Robinica pseudo-acacia management, 2) removing the hazard plants; Smilax china, Humulus japonicus, Pueraria thungergiana, 3) improving soil hardness and soil acidity.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.26 no.1
• /
• pp.73-84
• /
• 2020

Purpose: Though Korean healthcare services have been upgraded, infection and fire had been broken out in general hospitals. And higher concerns about quality assessment made it to clinical laboratory design guideline studies. So, this study investigates the facilities, equipment and personnel of laboratory medicine focusing on more than five hundred fifty bed hospital, and contributes to make guidelines for safety and efficiency in lab. Methods: Questionnaires to supervisor technologist and field surveys to medical laboratories in korean hospitals have been conducted for the data collection. 16 answers have been analysed statistically by MS Excel program. Results: Most of the sample tests such as hematology, clinical chemistry, immunology, transfusion, urinalysis, microbiology and molecular diagnosis are performed by more than 80% in large sized general hospital laboratory. In the test methods, automatic analyzers are used up to 80%, total laboratory automation up to 43% in clinical chemistry and immunology, and manual tests in all sorts of the test. There are placed in single lab or two and three labs above the ground, which are all in semi-open lab. There is some correlation with the number of specimens and the number of lab people depending on the number of hospital beds. Laboratory environment shows that work distance is good, but evacuation path width, visibility, separation of staff area from automatic analyzer, and equipment installations are needed to have more spaces and gears. Most of the infection controls are equipped with mechanical ventilation, air-conditioning, washbasin and wastewater separation, BSC installation and negative pressure lab room. Implications: Although the laboratory space area is calculated considering the number of hospital beds, type of tests and number of staff, hospital's expertise and the samples numbers per year should be taken into account in the planning of the hospital.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.153-153
• /
• 2019

Evapotranspiration (ET) is an important component of hydrological processes. Accurate estimates of ET variation are of vital importance for natural hazard adaptation and water resource management. This study first developed a soil water index (SWI)-based Priestley-Taylor algorithm (SWI-PT) based on the enhanced vegetation index (EVI), SWI, net radiation, and temperature. The algorithm was then compared with a modified satellite-based Priestley-Taylor ET model (MS-PT). After examining the performance of the two models at 10 flux tower sites in different land cover types over East Asia and Australia, the daily estimates from the SWI-PT model were closer to observations than those of the MS-PT model in each land cover type. The average correlation coefficient of the SWI-PT model was 0.81, compared with 0.66 in the original MS-PT model. The average value of the root mean square error decreased from $36.46W/m^2$ to $23.37W/m^2$ in the SWI-PT model, which used different variables of soil moisture and vegetation indices to capture soil evaporation and vegetative transpiration, respectively. By using the EVI and SWI, uncertainties involved in optimizing vegetation and water constraints were reduced. The estimated ET from the MS-PT model was most sensitive (to the normalized difference vegetation index (NDVI) in forests) to net radiation ($R_n$) in grassland and cropland. The estimated ET from the SWI-PT model was most sensitive to $R_n$, followed by SWI, air temperature ($T_a$), and the EVI in each land cover type. Overall, the results showed that the MS-PT model estimates of ET in forest and cropland were weak. By replacing the fraction of soil moisture ($f_{sm}$) with the SWI and the NDVI with the EVI, the newly developed SWI-PT model captured soil evaporation and vegetation transpiration more accurately than the MS-PT model.

• Journal of Environmental Health Sciences
• /
• v.48 no.4
• /
• pp.206-215
• /
• 2022

Background: Fragrance substances in consumer products can cause adverse health effects such as contact allergy. In South Korea, consumer chemical products must list 26 known fragrance allergens on product labels when they contain more than 0.01%. Fragrance substances are mostly used in combination, so co-exposure can occur via use of a consumer chemical product. Co-exposure to fragrance allergens may show a synergistic effect on the human body. Objectives: The aims of the study were to analyze the characteristics of fragrance allergens in consumer chemical products available on public websites and to identify the co-occurrence patterns of fragrance allergens. Methods: The chemicals in 1,443 ingredient disclosures for consumer chemical products were collected through the Ecolife database. The 26 labelled fragrance allergens were identified by category of consumer chemical product. The co-occurrence patterns of the 26 labelled fragrance allergens were analyzed by frequent pattern mining. The unlabelled fragrance allergens presented by European Union Scientific Committee on Consumer Safety were also identified. Results: Consumer chemical products contained an average of 5.3±4.2 substances among the 26 labelled fragrance allergens. More than 85% of air fresheners, deodorizing agents, and fabric softeners contained at least one of the 26 labelled fragrance allergens. The most frequently contained fragrance allergens were limonene (50.5%), linalool (49.9%), hexyl cinnamal (34.0%), and citronellol (28.3%). 16.7% of consumer chemical products showed a co-occurrence of limonene, linalool, hexyl cinnamal, and citronellol. Thirty-eight unlabelled fragrance allergens were found in the consumer chemical products, with hexamethylindanopyran (25.2%) being the most frequently contained substance. Conclusions: The characteristics and co-occurrence patterns of 26 labelled fragrance allergens would be useful information for the management of co-exposure to fragrance allergens in consumer chemical products. It is necessary for attention to be paid to unlabelled fragrance allergens.

• Journal of radiological science and technology
• /
• v.46 no.2
• /
• pp.141-149
• /
• 2023

The Korea Institute of Radiological and Medical Sciences plans to produce ²²⁵Ac, a therapeutic radio-pharmaceutical for precision oncology, such as prostate cancer. Radon, a radioactive gas, is generated by radium, the target material for producing ²²⁵Ac. The radon concentration is expected to be about 2000 Bq·m^-3. High-concentration radon-generating facilities must meet radioactive isotope emission standards by lowering the radon concentration. However, most existing studies concerning radon removal using activated carbon filters measured radon levels at concentrations lower than 1000 Bq·m^-3. This study measured ²²²Rn removal of coconut-based activated carbon filter under a high radon concentration of about 2000 Bq·m^-3. The ²²²Rn removal efficiency of activated carbon impregnated with triethylenediamine was also measured. As a result, the ²²²Rn removal amount of the activated carbon filter showed sufficient removal efficiency in a ²²²Rn concentration environment of about 2000 Bq·m^-3. In addition, despite an expectation of low radon reduction efficiency of Triethylenediamine-impregnated activated carbon, it was difficult to confirm a significant difference in the results. Therefore, it is considered that activated carbon can be used as a radioisotope exhaust filter regardless of whether or not Triethylenediamine is impregnated. The results of this study are expected to be used as primary data when building an air purification system for radiation safety management in facilities with radon concentrations of about 2000 Bq·m^-3.

• Corrosion Science and Technology
• /
• v.22 no.3
• /
• pp.187-192
• /
• 2023

The use of biomass is increasing as a response to the convention on climate change. In Korea, a method applied to replace fossil fuels is using wood chips in a cogeneration plant. To remove air pollutants generated by burning wood chips, a selective denitrification facility (Selective catalytic reduction, SCR) is installed downstream. However, problems such as ash deposition and descaling of the equipment surface have been reported. The cause is thought to be unreacted ammonia slip caused by ammonia ions injected into the reducing agent and metal corrosion caused by an acidic environment. Element analysis confirmed that ash contained alkali metals and sulfur that could cause catalyst poisoning, leading to an increase in the size of ash particle and deposition. Measurement of the size of ash deposited inside the facility confirmed that the size of ash deposited on the catalyst was approximately three times larger than the size of generally formed ash. Therefore, it was concluded that a reduction in pore area of the catalyst by ash deposition on the surface of the catalyst could lead to a problem of increasing differential pressure in a denitrification facility.

• Korean Journal of Hazardous Materials
• /
• v.2 no.1
• /
• pp.1-5
• /
• 2014

Acidic chemicals like sulfuric acid, nitric acid and hydrogen chloride take up 37% of the total chemical accidents which took place for the past 10 years. When an acidic chemical leak happens, fume is generated, diffusing into the air, which might cause serious damage to health of local residents and the environment. However, we have only little reference data for production and using of acidic chemicals. In this study, we investigated characteristics of production and using for acidic chemicals with high accident frequency. As a results, domestic chemical accidents were categorized according to chemical types and production, using, and handling characteristics of acidic chemicals were identified. Sulfuric acid was handled in the largest amount, followed in the order of hydrogen chloride, nitric acid, acrylic acid, and hydrogen fluoride. Sulfuric acid is used in the industry of manufacturing composite fertilizer and mainly used for manufacturing fertilizer. Hydrogen chloride is used in the industry of manufacturing basic chemicals for petrochemical family and mainly used for pH regulator. It is expected that this results could be used as preliminary data for making decisions on facilities required intensive management in order to prevent chemical accidents and prepare countermeasures against such accidents.

• Journal of Advanced Navigation Technology
• /
• v.27 no.5
• /
• pp.649-657
• /
• 2023

ICAO adopted the Carbon Offsetting and Reduction Scheme for International Aviation (CORSIA) at the 39th General Assembly in 2016, and 115 countries, including South Korea, expressed their intention to participate in CORSIA as of January 1, 2023. Since carbon generated in the aviation industry is mainly caused by greenhouse gases emitted from aircraft engines, fuel consumption must be reduced to reduce carbon emissions. Prior research, such as simulation, is essential to predict the effectiveness of each plan and to make decisions about its implementation. High-quality data is needed to derive accurate results, but it has been difficult to secure actual fuel consumption data, as they are considered to be classified airline data. Therefore, in this paper, after establishing a model that estimates fuel consumption based on actual fuel consumption data, the model is to be advanced to improve its accuracy.