• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.318-320
• /
• 2011

Numerical study was conducted to simulate the heat transfer on the real launch vehicle base. Three different base temperatures were chosen, to simulate the heat accumulation on the base. Moreover, six different pressure ratio conditions were used to express the different air conditions. As a result, the table that can used to estimate the base heat fox along the base temperature and pressure condition was made.

• 한국건축시공학회지
• /
• 제3권2호
• /
• pp.103-110
• /
• 2003

In the early 1990's the clean room system was a new trend of the operating room. This is the concept using in seminconductor plants. That is what the space around the operating table so clean as it remove contaminations with circulation of interior air. These articles describe the standard of interior construction and drawing details.

• 한국항공운항학회지
• /
• 제16권3호
• /
• pp.50-57
• /
• 2008

This paper analyse the economic inducement effects of aviation industry using Input-Output Model. For measuring economic inducement effects of aviation industry on korean economy, this paper divides air transport industry as two - manufacturing industry and service industry. we also use Input-Output Table of year 1990 through 2003 from Bank of Korea. Empirical results tells that aviation manufacturing industry have high product inducement effects to national economy although its low value-added coefficient such as 0.486 for aviation manufacturing industry and 0.447 for aviation service industry. public R&D doesn't have much effect to each of aviation industries.

• 한국실내디자인학회논문집
• /
• 제38호
• /
• pp.250-257
• /
• 2003

The purpose of this study is to analyze the varying characteristic factors for residential kitchen remodeling according to contemporary life style. The subjects of this investigation are collected through questionnaire from adult residents who live in Seoul, Korea. The collected cases are analyzed by using Spss-win. By using the vaimax method on the basis of factor analysis, the satisfaction of the actual conditions is under the influence of finished materials & function, sanitary installation, layout, cooling & heating apparatus, day lighting, air conditioning, and safety. The preference of kitchen remodeling Is affected by finished materials, function, environmental equipment, and air conditioning. The Need of kitchen facility is caused by working table, refrigerator, gas range, dish apparatus, and addition function.

• 설비공학논문집
• /
• 제2권2호
• /
• pp.137-141
• /
• 1990

When the relative humidity is measured with an aspirated psychrometer, three factors, which affect the measurement of relative humidity, are atmospheric pressure, the size of wet element and the wind velocity. This paper investigated the effects of the above three factors, and the computer code was developed in order to enhance the accuracy of the relative humidity measurement. As results, it is found that the relative humidity decreases by 6%RH with increasing atmospheric pressure from 650 mbar to 1100 mbar. It is found that the relative humidity drops down when the size of the wet element increases, though the effect of the size of the wet element is not significant. Finally, relative humidity increases with the increasing wind velocity. The difference between the psychrometic table in the present KS and the present results is about 2%RH maximum. As a conclusion, the three factors mentioned above should be considered in order to secure accurate measurement of relative humidity.

• 펄프종이기술
• /
• 제31권2호
• /
• pp.64-69
• /
• 1999

Drainage phenomena on the conventional fourdrinier table can be divided into two distinct zones based on the drainage mechanisms involved. In the forming zone, natural drainage is the principal water removal mechanism, while in the vacuum zone vacuum dewatering displaces water in the wet sheet with air. In this study to investigate the influence of polyelectrolyte addition on natural and vacuum dewatering a vacuum drainage tester was developed and used. Addition of PAM decreased the dryness of the wet sheet after vacuum dewatering since substantial reduction in vacuum level occurred due to flocculation of fibers. Addition of PAM, however, increased the wet web dryness when the fines content of the stock is greater than 35% indicating the presence of fines reduced the air permeability of the wet web to increase its response to vacuum dewatering. On the other hand, PEI, which flocculates the fibers and fines via patch formation, showed little impact on the drainage characteristics of the stocks.

• 전기학회논문지
• /
• 제61권5호
• /
• pp.690-697
• /
• 2012

Novel 8/10 bearingless switched reluctance motor, which can control rotor radial positions with magnetic force, is proposed. The motor has combined characteristics of switched reluctance motor and magnetic bearing. This paper proposes a air-gap control system method of suspending force control in a bearingless switched reluctance motor (BLSRM). The proposed radial force control scheme is independent to the torque winding current. A PI direct current control (DCC) controller and look-up table are used to maintain a constant rotor air-gap. From the analysis and the experimental results, it is shown that the proposed strategy is effective in realizing a naturally decoupled radial force control of BLSRM.

• 한국산업보건학회지
• /
• 제20권4호
• /
• pp.274-281
• /
• 2010

The objectives of this study are (a) to investigate the distribution patterns and exposure concentrations of biological agents in sawmill industries and (b) to compare sampling methods of biological agents. The representative processes of 5 sawmills were selected to measure total airborne bacteria, fungi, endotoxin as well as dust. Airborne bacteria and fungi were measured with one stage impactor, six stage impactor and gelatin filteration methods. Endotoxin was collected with polycarbonate filters and analysed by kinetic chromogenic Limulus Amebocyte Lysate method. Geometric mean levels of airborne bacteria, fungi, endotoxin and dust were 1,864 CFU/$m^3$, 2,252 CFU/$m^3$, 31.5 EU/$m^3$ and 2.4 mg/$m^3$. The ratios of indoor/outdoor concentrations were 3.7 for bacteria, 4.1 for fungi, 3.3 for endotoxin and 9.7 for dust. The respiratory fractions of bacteria were 68.0, 50.9, 49.2 and 45.1% in band-saw, table-saw, rip-saw process and outdoor air. The respiratory fractions of fungi were 78.7, 90.8, 87.5 and 84.8% in band-saw, table-saw, rip-saw process and outdoor air, respectively. There was no significant differences in bacterial concentrations among single stage, six stage impaction and filteration methods. But, fungal concentrations measured with filtration methods were significantly higher than those with impaction methods. Geometric mean levels of airborne bacteria and fungi were higher than the OSHA guideline values of 1,000 CFU/$m^3$. The respiratory fractions of fungi were above 75%. The concentrations of biological agents were significantly different among culture-based sampling methods. In the exposure assessments of biological agents, further studies are needed for the comparisons of diverse sampling methods and the investigations of environmental factors.

• 한국건설순환자원학회논문집
• /
• 제8권1호
• /
• pp.120-128
• /
• 2020

본 연구에서는 모르타르와 직접 혼합 가능한 결정성장형 무기재료 활용 고상 캡슐을 제조하였으며, 결정성장형 무기재료 조성비에 따라 3수준의 고상 캡슐을 제조하였다. 제조된 고상 캡슐은 시멘트 질량에 3% 혼합하여 모르타르의 품질 및 균열 치유 특성을 평가하였다. 고상 캡슐을 혼합한 모르타르의 테이블 플로우 및 공기량 평가결과 고상 캡슐의 혼합에 관계없이 테이블 플로우 및 공기량에 미치는 영향은 없는 것으로 나타났다. 고상 캡슐을 혼합한 모르타르의 water flow test 및 crack closing test에 따른 균열 치유특성 평가결과 초기 투수량이 감소하는 결과가 나타났으며, 시간 경과에 따라 반응생성물 발생하여 균열이 치유되는 것을 확인할 수 있었다.

• 대한방사선치료학회지
• /
• 제8권1호
• /
• pp.29-35
• /
• 1996

We are often faced with the clinical situations that is inevitably extended SSD for electron beam therapy due to anatomical restriction or applicator structure. But there are some difficulties in accurately predicting output and properties. In electron beam treatment , unlike photon beam the decrease in output for extended SSD does not follow inverse-square law accurately because of a loss of side scatter equilibrium, which is particularly significant for small cone size and low energies. The purpose of our study is to analyze the output in changing with the energy, cone size, air gap beyond the standard SSD and to compare inverse-square law factor derived from calculated effective SSD, mominal SSD with measured output factor. In addition, we have analyzed the change of PDD for several cones with different SSDs which range from 100cm to 120cm with 5cm step and with different energies(6MeV, 9MeV, 12MeV, 16MeV, 20MeV). In accordance with our study, an extended SSD produces a significant change in beam output, negligible change in depth dose which range from 100cm to 120cm SSDs. In order to deliver the more accurate dose to the neoplastic tissue, first of all we recommend inverse-square law using the table of effective SSDs with cone sizes and energies respectively or simply to create a table of extended SSD air gap correction factor. The second we need to have an insight into some change of dose distribution including PPD, penumbra caused by extended SSD for electron beam therapy.