• 제목/요약/키워드: Air stream

검색결과 494건 처리시간 0.034초

임하호 유입지천의 수온과 탁도 변화 (The Variation of Water Temperature and Turbidity of Stream Flows entering Imha Reservoir)

  • 김우구;정관수;이용곤
    • 생태와환경
    • /
    • 제39권1호통권115호
    • /
    • pp.13-20
    • /
    • 2006
  • 낙동강 수계에 위치한 임하호 유입지천의 수온 및 탁도변화특성을 2005년 6월에서 9월까지 실측된 자료를 이용하여 분석하였다. 비강우시 임하호 유입지천 수온은 $5^{\circ}C$정도의 일교차를 보이며 비교적 규칙적으로 변화하는 것으로 보였다. 강우시 유입지천 수온은 급감하며 유량이 많은 경우에는 기온과 이슬점보다 낮고,유량이 작은 경우에는 기온보다 높은 경향이 있으므로 유입지천의 수온은 유량의 영향을 받는 것으로 보였다. 임하호 유입지천 탁도는 토양 및 지질특성 차이로 인하여 커다란 차이를 보였고, 유량이 증가함에 따라 증가하지만 최대탁도는 최대강우강도의 영향을 많이 받는 것으로 판단된다. 임하호 유입하천수의 수온과 탁도변화에 따른 저수지 탁도변화를 분석하였다. 임하호 유역의 강우유출로 인하여 유입지천의 유량이 증가하게 됨에 따라 탁도는 증가하고 수온은 급감하여 임하호 표층의 수온보다는 낮고 심층의 수온보다는 높기 때문에 중층으로 유입되어 중층의 탁도를 증가시키는 것을 알 수 있었다. 그 이후 임하호 유입지천의 유량이 감소함에 따라 탁포는 감소하고 수온은 저수지 표면의 수온과 비슷하거나 높아져 표층으로 유입되어 표층의 탁도를 낮추는 것으로 나타났다. 실측값이 없는 과거의 탁수발생현상을 수치모의하기위해서 필수적인 유입지천의 수온 및 최대탁도추정을 시도하였다. 수온을 추정하기 위해서 2005년 6원부터 9원까지 실측한 자료와 기온과 이슬점을 독립변수로 채택하였으며 유량이 20 $m^3\;s^{-1}$ 이상과 이하의 구간에 대하여 각각 다중회귀분석을 수행하였으며 절대평균오차 (AME)는 약 $1.5^{\circ}C$였으며 최대차이는 약 $6^{\circ}C$였다. 수온추정의 정확도를 높이기 위하여 수온변화양상에 대한 친찰이 필요하고 이를 근거로 하여 새로운 독립변수를 추가한 필요가 있을 것으로 판단된다. 최대탁도를 추정하기 위하여 2005년 6월부터 9월까지의 수문정보를 근거로 최대강우강도를 독립변수로 채택하여 비선형회귀분석을 수행하였다. 최대탁도 추정회귀식에 의하여 계산된 값과 실측값과는 커다란 차이를 나타내는 경우가 나타났다. 최대닥도추정의 정착도를 증가시키기 위하여 탁수밭생에 대한 고찰이 필요하며 지점별유역특성 인자들을 고려하여야 할 것으로 판단된다.

덕음광산 선광광미와 주변토양의 중금속에 대한 수평.수직적인 분산에 관한 연구 (A Study on the Horizontal and Vertical Distribution of Heavy Metal Elements in Slime Dump from Dukum Mines, Korea)

  • 박영석
    • 자원환경지질
    • /
    • 제33권2호
    • /
    • pp.91-100
    • /
    • 2000
  • It has been more than ten years since Dukun mine was abandoned. Tailings of waste deposits and slime dumps in the abandoned Dukum mine have been left to be deserted for fifty years. The results of fifty years of neglecting are nothing short of major environmental problems. Slime dumps have been exposed to air and water in the mine over ten years and then soil profile has been formed well. Soil in the upper layer (A horizon) is the light gray color due to the leaching of cations. Soil in the lower layer (A2 horizon, 0.2∼0.3m)is tinted with reddish brown and yellowish brown color due to the development of iron oxides and iron hydroxides. Soil in the lower part of B horizon of (1.0∼3.0m) with the growth of copper and zinc oxides exposes to the bluish green, light blue, and dark gray. Ranging from 3m to 8m in depth, 85 samples were taken from 22 sampling sites with 50m intervals located on the slime dump area with hand auger and trench (open cut). As tailings was distributed, heavy metal elements extracted by the process of surface water and ground water move and disperse in to the hydrosphere. Waste dumps were distributed in and around the mine and water draining from those dumps be a potential source of contamination. Soils, thus, can be dispersed into downslope and downstream through wind and water by clastic movement. These materials may be deposited in another horizon if the water is withdrawn, or if the materials are precipitated as a result of differences in pH, or other conditions in deeper horizons. These were primarily associated with acid mine drainage. The characteristics and rate of release of acid mine drainage are influenced by various chemical and biological reactions at the source of acid generations. Prolonged extration of heavy metal elements has a detrimental effect on the agricultural land and residental area. Twenty soil samples were collected from the agricultural land in the area (0∼30 cm). Seventeen samples were also taken from the sediment in the stream running alongside the dumps. The dispersion patterns of heavy metal elements are as follows: The content of As ranged 2∼6 ppm in a horizon, 20∼125 ppm in B horizon with large amount of clay mineral is concentrated and the content of Cd ranged 1∼2 ppm in A horizon, 4∼22 ppm in B horizon. Like Cd, the content of As, Cu, Zn, Pb in B horizon is higher than that in A horizon (approximately 5∼100 times). When soil formation proceeds in stages, it is necessary to investicate the B horizon with the concentration of heavy metal and preventive measures will have to established.

  • PDF

건조에 따른 채소중 잔류농약의 경시변화 (Residual Patterns of Pesticides on Vegetables During Drying Process)

  • 남화정;곽영주;김철기;한영선;오세흥;장진섭;임수선;권성희;장승은;여은영;이은주;김순심;윤신원
    • 한국식품위생안전성학회지
    • /
    • 제22권4호
    • /
    • pp.300-305
    • /
    • 2007
  • 본 연구는 취나물, 고춧잎, 열무를 대상으로 건조에 따른 procymidone, diazinon의 잔류량의 경시적 변화를 연구할 목적으로 수행되었다. 실내풍건 방법으로 건조하는 경우, procymidone, diazinon의 잔류량이 증가하지만 수분함량의 감량을 고려하여 보정하면 $10{\sim}83%$ 감소하였고, 열풍건조 방법으로 건조하는 경우도 농약 잔류량은 증가하여도 수분함량의 감량을 고려하여 보정하면 $44{\sim}71%$ 감소하였다. 이 결과에 의하면, 건조에 의하여, 수분 보정한 농약잔류량이 대부분 감소하므로 건조농산물을 판정함에 있어 단순히 신선농산물의 기준에서 수분함량의 감량을 고려하여 기준 적용할 것이 아니라 건조과정 중 농약잔류량에 영향을 미치는 여러 요인을 고려한 추가연구가 필요하다고 판단된다.

명품 패션 제품의 브랜드 일치성과 구매의도의 구조적 관계: Self-Construal의 매개효과를 중심으로 (The structural relationship between brand consistency and intention to purchase luxury fashion products: with a focus on the mediating effect of self-construal)

  • 이정현
    • 한국산학기술학회논문지
    • /
    • 제18권7호
    • /
    • pp.249-256
    • /
    • 2017
  • 명품 패션 제품은 시대가 지나도 꾸준한 소비자를 확보하고 있으며, 최근에는 시장의 폭도 매우 넓어지고 구매하는 연령층도 다양하게 변화하고 있다. 명품제품을 구매하고자 하는 의도는 그 제품과의 브랜드 일치성이 많은 작용을 하고 있다는 기존 연구들의 결론을 바탕으로 본인 브랜드 일치성과 구매의도와의 관계에서 Self-Construal의 매개효과 분석에 대해 살펴보았다. 수집된 자료는 SPSS 18.0과, AMOS 20.0을 이용하여 분석하였다. 연구결과 첫째, self-construal에 영향을 미치는 일치성으로는 사회적 일치성, 실제적 일치성, 이상적 일치성의 순으로 나타났으며, 둘째, self-construal에 대한 매개효과 분석결과, self-construal은 구매의도에 유의한 영향을 미치는 결과와 실제적, 이상적 일치성과 구매의도의 관계에서 self-construal은 부분매개효과만 있는 것으로 나타났다. 즉, 소비자들은 명품 패션 제품을 구매 할 때 브랜드에 대해 자신이 바라는 사회적 역할의 수행에 도움을 주는 도구로 인식하는 성향보다는 자신의 이미지를 표현해 주며 자신이 인지하는 모습과 선택한 브랜드가 일치하는 성향을 더 바라는 것으로 해석할 수 있다. 결과적으로 브랜드를 소비하는 소비자 개인의 개성과 주관적인 환경적 여건이 잘 나타내어지기를 원하는 것으로 볼 수 있으며, 개성을 나타내지 못하는 경향에 대해 더 돋보이게 할 수 있는 자기만의 가치에 중점을 두고 있다는 것을 의미한다.

대류권계면 접힘에 의한 영동지방 집중호우사례의 특성분석 (An analysis of Characteristics of Heavy Rainfall Events over Yeongdong Region Associated with Tropopause Folding)

  • 이혜영;고혜영;김경익;윤일희
    • 한국지구과학회지
    • /
    • 제31권4호
    • /
    • pp.354-369
    • /
    • 2010
  • 2006년 10월 22일에서 24일에 걸쳐 한반도 강릉지역에서 강한 집중호우가 발생했다. 이 기간에 대해서 집중호우가 발생하기 전과 강우강도가 가장 강했을 때 나타나는 종관적, 운동학적 특성을 조사하기 위하여 본 연구에서는 지상일기도, 상층일기도, 적외위성영상, 자동기상관측장비(AWS) 자료, NCEP(National Centers for Environmental Prediction) 전구분석자료를 이용하였다. 분석 기간 동안 강릉에서 관측된 총 강수량은 316.5 mm이고, 최대 순간풍속은 $63.7m\;s^{-1}$이다. 일기도를 분석해보면 집중호우가 시작하기 전 온대저기압이 한반도 중부에서 발달하였으며 한반도 북부에 역전기압골이 형성되어 있다. 또한 300 hPa 상층일기도에서는 서해와 한반도 남부에 제트기류가 위치하며, 위치 소용돌이도 이상과 관련된 절리 저기압이 한반도 북서부에서 발달하고 있다. 강우강도가 가장 강했을 때의 특성을 좀 더 자세히 알아보기 위하여 강릉지역의 위치 소용돌이도 이상과 바람, 위치 소용돌이도의 시간-연직 단면도, 연직운동, 발산장과 수렴장, 역학적 온위의 연직분포에 대해 조사하였다. 종관적, 운동학적 과정을 분석해 본 결과 대류권계면 접힘이 집중호우 발생에 큰 역할을 한 것으로 사료된다.

Surface Ozone Episode Due to Stratosphere-Troposphere Exchange and Free Troposphere-Boundary Layer Exchange in Busan During Asian Dust Events

  • Moon, Y.S.;Kim, Y.K.;K. Strong;Kim, S.H.;Lim, Y.K.;Oh, I.B.;Song, S.K.
    • 한국환경과학회지
    • /
    • 제11권5호
    • /
    • pp.419-436
    • /
    • 2002
  • The current paper reports on the enhancement of O$_3$, CO, NO$_2$, and aerosols during the Asian dust event that occurred over Korea on 1 May 1999. To confirm the origin and net flux of the O$_3$, CO, NO$_2$, and aerosols, the meteorological parameters of the weather conditions were investigated using Mesoscale Meteorological Model 5(MM5) and the TOMS total ozone and aerosol index, the back trajectory was identified using the Hybrid Single-Particle Lagrangian Integrated Trajectory Model(HYSPLIT), and the ozone and ozone precursor concentrations were determined using the Urban Ashed Model(UAM). In the presence of sufficiently large concentrations of NO$\sub$x/, the oxidation of CO led to O$_3$ formation with OH, HO$_2$, NO, and NO$_2$ acting as catalysts. The sudden enhancement of O$_3$, CO, NO$_2$ and aerosols was also found to be associated with a deepening cut-off low connected with a surface cyclone and surface anticyclone located to the south of Korea during the Asian dust event. The wave pattern of the upper trough/cut-off low and total ozone level remained stationary when they came into contact with a surface cyclone during the Asian dust event. A typical example of a stratosphere-troposphere exchange(STE) of ozone was demonstrated by tropopause folding due to the jet stream. As such, the secondary maxima of ozone above 80 ppbv that occurred at night in Busan, Korea on 1 May 2001 were considered to result from vertical mixing and advection from a free troposphere-boundary layer exchange in connection with an STE in the upper troposphere. Whereas the sudden enhancement of ozone above 100 ppbv during the day was explained by the catalytic reaction of ozone precursors and transport of ozone from a slow-moving anticyclone area that included a high level of ozone and its precursors coming from China to the south of Korea. The aerosols identified in the free troposphere over Busan, Korea on 1 May 1999 originated from the Taklamakan and Gobi deserts across the Yellow River. In particular, the 1000m profile indicated that the source of the air parcels was from an anticyclone located to the south of Korea. The net flux due to the first invasion of ozone between 0000 LST and 0600 LST on 1 May 1999 agreed with the observed ground-based background concentration of ozone. From 0600 LST to 1200 LST, the net flux of the second invasion of ozone was twice as much as the day before. In this case, a change in the horizontal wind direction may have been responsible for the ozone increase.

熱分解에 의한 可燃性 廢棄物의 처리 및 資源回收에 관한 연구 (A Study on the Treatment of Combustible Wastes and the Resource Recovery by Pyrolysis)

  • Kim, Sam-Cwan;Zong, Moon-Shik
    • 한국환경보건학회지
    • /
    • 제13권1호
    • /
    • pp.17-33
    • /
    • 1987
  • As a result of technical advances and industrialization, the characteristics of domestic and industrial wastes are becoming more complex. Accordingly, improved treatment and disposal systems are being continuously sought to take account of complex characteristics and to comply with economic restrictions. In this study, an application of pyrolysis to the treatment of industrial wastes, including waste scrap rubber, waste raw material used in making the slipper bottom and waste PVC pipe, and the effectiveness of pyrolysis in resource recovery from these wastes were investigated. Batches of wastes were pyrolysed by external heating to a temperature of 400-800$\circ$C in a 32 mm diameter x 0.9 m long silica tube to produce combustible gases, oils and chars. Before the start of pyrolysis runs, the entire system was purged with nitrogen gas to exclude the air. The temperature inside the retort was controlled by the thermocouple in the gas stream, and referred to as the pyrolysis temperature. Under these conditions three products were separately collected and further analyzed. The results were summarized as follows. 1. More gases and less chars were produced with higher pyrolyzing temperature and with higher rates of heating, but the yields of oils tended downwards at temperatures above 700$\circ$C. Accordingly, operating conditions of pyrolysis should be varied with desired material. 2. Calorific values and sulfur contents of produced oils were sufficient and suitable for fuel use. Chars from waste rubber had high heating values with low sulfur contents, but calorific values of chars from waste PVC and waste slipper were as low as 3, 065-4, 273 kcal/kg and 942-2, 545 kcal/kg, respectively. Therefore, char from these wastes are inappropriate for fuel. 3. Soluble contents of Pb, Cd, Cu and Zn in chars from waste rubber and waste slipper were below the Specific Hazardous Waste Treatment Standards. However soluble contents of Pb and Cd in chars from waste PVC were one or two times and five or seven times exceedingly the Specific Hazardous Waste Treatment Standards, respectively. 4. Post high heating is desirable for treatment method of waste PVC which generates toxic hydrogen chloride. 5. The proportions of hydrogen, methane and ethane in produced gases were in the range of 3.99-35.61% V/V, 18.22-32.50% V/V and 5.17-5.87% V/V, respectively. 6. Pyrolysis is a useful disposal method in case of waste slipper, which was hardly combustible, and thus investigations of this kind of materials are required for effective management of industrial waste. 7. Based upon the possible market development for products, overall pyroly economics to take account of treatment values of noncombustible or hazardous materials should be evaluated.

  • PDF

Pyrazole과 Pyrazolotriazole 유도체의 합성 및 특성 연구 (Synthesis, Fastness and Spectral Properties of Some New Azo Pyrazole and Pyrazolotriazole Derivatives)

  • Rizk, Hala F.;El-Badawi, Mahmoud A.;Ibrahim, Seham A.;El-Borai, Mohamed A.
    • 대한화학회지
    • /
    • 제54권6호
    • /
    • pp.737-743
    • /
    • 2010
  • 5-Amino-1,3-diaryl-pyrazoles 1a-c 와 다양한 aryl amine의diazonium salts를 반응시켜서 1,3-diaryl-5-amino-4-arylazopyrazoles 3a-l을 합성하였으며, 몇 가지 화합물은 5-amino-1,3-diaryl-4-nitroso-1H-pyrazoles 2a-c와 aryl amine의 diazonium salts를 반응시켜서 얻었다. 합성한 azo 유도체 화합물 3a-l을 DMF 용매 속에서 cupric acetate와 산화반응시켜서 2,4,6-triaryl-2,4-dihydropyrazolo [4,3-d]-1,2,3-triazoles 4a-l을 합성하였으며, 합성한 cyclic triazoles에 대한 형광 특성을 측정하였다. 한편, Diazotization of sodium nitrite/ortho-phosphoric acid 조건에서 5-amino-1,3-diaryl-1H-pyrazoles 1a-c를 diazotization화 반응시킨 다음에, aryl amines과 반응시켜서 o-aminoazo compounds 5a-f를 합성하였다. 합성한 화합물 5a-f를 pyridine/cupric acetate 반응 조건에서 반응시켜서 triazole 6a-f들을 합성하였으며, 얻어진 화합물 6a-f을 aryl diazonium salts과 반응시켜서 화합물 7a-j을 합성하였다. 합성한 염료 화합물을 polyesters에 분산염료와 정착성을 측정하였다.

소화근처 헵탄 풀화재의 화염불안정성 (Flame Instability in Heptane Pool Fires Near Extinction)

  • 정태희;이의주
    • 대한기계학회논문집B
    • /
    • 제36권12호
    • /
    • pp.1193-1199
    • /
    • 2012
  • 액체연료를 사용하는 풀화재에서 화염불안정성에 대하여 산화제 유속변화와 농도변화의 효과를 알아보기 위해 컵버너 실험을 수행하였다. 연료는 헵탄을 사용하였고, 산화제는 공기에 질소와 이산화탄소를 희석하였다. 소화근처에서 축방향 및 화염 밑면에서 두 가지 형태의 대표적인 불안정성이 관찰되었다. 화염 밑면에서 발생되는 불안정성은 셀, 스윙, 회전 모드로 특성화 할 수 있고, 산화제의 유속이 증가할수록 모든 불활성 기체에서 셀, 스윙 모드에서 회전모드로 천이하였다. 이러한 화염밑면 불안정성에 영향을 미치는 변수들을 파악하기 위하여 초기혼합률, Le 수, 단열화염온도에 대해서도 함께 조사되었다. 이 중 Le 수가 불안정성 모드와 가장 큰 상관관계를 보이고 있지만 보다 정확한 관계를 규명하기 위해서는 더 많은 실험조건에서의 결과가 요구된다. 또한, 소화농도근처의 화염에서는 유속이 작거나 큰 경우에는 축방향 주기적인 진동불안정성이 나타나지 않고, 적절한 산화제 속도 영역에서만 관찰된다. 이는 작은 유속에서는 증발하는 연료속도가 임계유속이하이며, 큰 유속에서는 반응중인 연료유속과 산화제 유속이 유사하기 때문으로 판단된다.

화순 폐탄광지역 광산배수와 침전 및 증발잔류광물에 대한 지구화학적 및 광물학적 연구 (Geochemistry and Mineralogy of Mine Drainage Water Precipitate and Evaporite Minerals in the Hwasoon Area)

  • 박천영;정연중;강지성
    • 자원환경지질
    • /
    • 제33권5호
    • /
    • pp.391-404
    • /
    • 2000
  • This study investigated the geochemical characteristics of mine drainage discharged from an abandoned coal mine in the Hwasoon area. Surface water samples were collected from 23 locations along the Hancheon creek. The concentration of Zn and Cu in stream waters was highest at low pH (3.53), whereas the content of TDS and TDI was highest at high pH (7.78) due to the concentration of Ca, $HCO_3$ and $SO_4$. At the upstream site, the Ba, Fe, Mn, Zn, and $SO_4$ contents were relatively high but decreased significantly with the distance from the coal mine. On the contrary, the Na and $NO_3$ contents were low at the upstream site but increased downstream. Yellow precipitate material collected in the Hancheon consisted mainly of iron and LOI. This yellow precipitate was heated from 100 to $900^{\circ}C$ for 1 hour. With increasing temperature, the intensity of hematite peaks were sharply produced in X-ray pattern and the absorption band Fe-O of hematite increased in IR due to dehydration and melting. The yellow to brown precipitate and evaporite materials were collected by a air-dry from the acid mine water at the laboratory. After drying, the concentration of ions in the acid water samples increased progressively in oversaturation with respect to either gypsum, ferrohexahydrite or quenstedetite. The X-ray powder diffraction studies identified that the precipitated and evaporated materials after drying were well crystallized gypsum, ferrohexahydrite and quenstedetite. Diagnostic peaks used for identification of gypsum were the 7.65, 4.28, 3.03, 2.87 and 2.48$\AA$ peaks and those for ferrohexahydrite were the 5.46, 5.12, 4.89, 4.44, 4.05, 3.62, 3.46, 3.40, 3.20, 3.03, 2.94, 2.53, 2.28, 2.07, 1.88 and 1.86${\AA} peaks. The IR spectra with OH-stretching, deformation of $H_2O$and ${SO_4}^{2-}$stretching vibration include the existence of gypsum, ferrohexahydrite and quenstedetite in the precipitated and evaporite materials. In the SEM and EDS analysis for the evaporite material, gypsum with well-crystallized, acicular, and columnar form was distinctly observed.

  • PDF