• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.435-436
• /
• 2009

In the effort on cost reduction in marine equipment company, the medium sized impeller blade ($500mm{\times}200mm{\times}20mm$) of an axial flow pan was manufactured by the high pressure die casting, with which was replaced the gravity die casting. High pressure die casting is a practical alternative because of some advantages such as excellent accuracy and smooth cast surface as well as cost reduction if a certain amount of porosity in the parts can be minimized. In order to reduce the porosity in the center of the neck which is thickest region of the impeller blade, the several gate designs were proposed in this work. The flow simulations for each gate design were performed and then the optimal design was determined by considering the air pressure distribution in neck section. Finally, the size of porosity in the neck of the die cast impeller blade for optimal design was less than 1mm, which satisfied the requirement.

• 한국농공학회지
• /
• 제33권2호
• /
• pp.120-129
• /
• 1991

This study refers to temporal variation of physical properties of tilled soil under natural rainfalls. Field measurements of porosity, average hydraulic conductivity and average capillary pressure head on a tilled soil were conducted by soil sampler and air-entry permeameter respectively at regular intervals after tillage. Temporal variation of these physical properties were analysed by cumulative rainfall energy since tillage. Field experiment was conducted on a sandy loam soil at Suwon durging April~July in 1989. The followings are a summary of this study results ; 1. Average porosity just after tillage was 0.548cm$^3$/cm$^3$. As cumulative rainfall energy were increased in 0.1070, 0.1755, 0.3849 J/cm$^2$, average porosity were decreased in 0.506, 0.4]95, 0.468m$^3$/cm$^3$ respectively. 2. Average hydraulic conductivity just after tillage was 45.42cm/hr. As cumulative rainfall energy were increased in 0.1755, 0.2466, 0.2978, 0.3849J/cm$^2$ average hydraulic conductivity were decreased in 15.34, 13.47, 9.58, 8.65cm/hr respectively. 3. As average porosity were decreased in 0.548, 0.506, 0.495, 0.468cm$^3$/cm$^3$ average capillary pressure head were increased in 6.1, 6.7, 6.9, 7.4cm respectively. 4. It was found that temporal variation of porosity, average hydraulic conductivity on a tilled soil might be expressed as a function of cumulative rainfall energy and average capillary pressure head might be expressed as a function of porosity. 5. The results of this study may be helpful to predict infiltration into a tilled soil more accurately by considering Temporal variation of physical properties of soil.

• 한국환경농학회지
• /
• 제41권2호
• /
• pp.101-107
• /
• 2022

BACKGROUND: Soil amendment was necessary applied for the sand that had been used to root zone of green ground in golf course because of its low water retention power and cation exchangeable capacity. This study was conducted to evaluate the effect of the mixed ratio of peat moss and coconut coir as soil amendment materials on the soil physicochemical properties applied to rootzone based on sand. METHODS AND RESULTS: The soil amendments were blended at 0, 3, 5, 7 and 10% by soil volume. The pH in the peat moss treatment was lower than that of control (0% soil amendment), and pH and electrical conductivity (EC) in the coconut coir were higher. The blending ratio of peat moss was negatively correlated with pH of rootzone soil (p<0.01), and that of coconut coir positively with EC (p<0.01). As compared with control, capillary porosity, the physical factors such as air-filled porosity, total porosity, and hydraulic conductivity of rootzone soil were increased by applying peat moss and coconut coir. For correlation coefficients between percentage of soil amendments and soil physical factors, peat moss and coconut coir were positively correlated with porosity and hydraulic conductivity (p<0.01). CONCLUSION(S): These results indicated that the application of peat moss and coconut coir affected on the change of physicochemical properties of rootzone soil, and improved soil porosity and hydraulic conductivity.

• 전기화학회지
• /
• 제6권3호
• /
• pp.203-207
• /
• 2003

아연공기전지는 공기중의 산소를 사용하므로 cathode의 재활용이 가능하다는 장점이 있으며 아연의 이론용량이 820(mAh/g)로 상당히 높다 또한 아연공기전지는 저율방전에서 방전말기까지 아주 평탄한 방전전압을 유지한다. 그러나, 고율방전에서는 방전전압이 낮아지고 에너지가 감소하며 cathode에 포함되어 있는 PTF도의 함량에 따라 저항 및 기공율에 많은 변화를 보이고 있다. 이에 본 연구에서는 전지의 에너지, 방전용량, 방전전압, DC저항, GSM, ASTM에 의한 기공율 측정을 통해 cathode내의 PTFE함량이 아연공기전지에 미치는 영향을 연구하였다. 그 결과 결합제의 함량이 감소할수록 전지의 특성이 향상되었으며 $15wt\%$일 때 가장 우수한 전지특성을 얻을 수 있었다.

• 지구물리와물리탐사
• /
• 제15권4호
• /
• pp.209-218
• /
• 2012

다양한 직경과 길이, 암종, 그리고 유효공극률을 가지는 8종의 암석시험편에 대하여 반복적으로 고체밀도와 유효공극률을 산출하고 그에 따른 반복성 및 재현성을 검토하였다. 또한 대기의 기온변화가 유효공극률의 산출에 미치는 영향에 대해 고찰하였다. 8종의 암석시험편에 대하여, 진공압력은 사용한 시스템의 최대진공인 1 torr로, 진공시간은 ISRM 표준시험법의 규약을 만족하는 80분으로 하여 유효공극률을 7번씩 산출하였다. 즉, 참조를 위해 각각의 시험편에 대해 1회, 반복성 검토를 위하여 모든 실험 조건을 같이한 상태에서 각 3회씩, 그리고 재현성의 검토를 위하여 동시에 수침진공하는 시험편의 숫자를 2, 4, 8개로 달리하여 3회 등 총 7번씩의 유효공극률을 산출하고 비교 검토하였다. 고체밀도의 경우 8개 암석시험편의 평균편차가 0.00 $g/cm^3$으로 나타나서 완벽한 반복성과 재현성을 보였다. 유효공극률의 경우는 모든 실험 조건을 동일하게 한 반복성 실험에서는 평균편차가 0.07% 이하, 실험 조건 중에 수침진공 하는 시험편의 숫자를 달리한 재현성 실험에서는 0.05% 이하로 모두 양호한 값을 나타내었다. 재현성 실험에 의해 측정된 유효공극률이 대부분 반복성 실험에서 측정되는 편차범위 내에서 측정되어 양호한 재현성을 보였다. 따라서, 암석시험편의 개수를 2, 4, 8개로 달리하며 수침진공 한 재현성 실험에서는 표준시험법에 따라서 1 torr 정도의 고진공을 사용하는 경우에는 여러 개의 시료를 동시에 수침진공하여도 산출되는 유효공극률에는 영향을 미치지는 않는다. 온도, 습도, 현지기압 등 기상자료와 시험편의 물속무게를 비교하고 대기 온도가 물의 온도, 밀도 및 부력에 영향을 주어 결국 시험편의 물속무게를 잘못 평가할 수 있음을 보였다. 따라서 시험편의 유효공극률을 정교하게 산출하기 위해서는 시험편의 물속무게를 측정할 때 물의 온도를 실험조건에 포함시키거나 다른 물리량과 함께 측정하여 물의 밀도 변화에 따른 물속무게 변화를 보정하여야 더 정밀한 유효공극률을 산출이 가능할 것이다.

• KIEAE Journal
• /
• 제10권3호
• /
• pp.89-96
• /
• 2010

In comparison with ordinary or heavy-weight concrete, light-weight air void concrete has the good aspects in optimizing super tall structure systems for the process of design considering wind load and seismic load by lightening total dead load of buildings and reducing natural resources used. Light-weight air void concrete has excellent properties of heat and sound insulating due to its high amount porosity of air voids. So, it has been used as partition walls and the floor of Ondol which is the traditional Korean floor heating system. Under the condition of which the supply of light-weight aggregates are limited, the development of light-weight concrete using air voids is highly required in the aspects of reduced manufacturing prices and mass production. In this study, we investigated the physical properties and thermal behaviors of specimens that applied different mixing ratios of foaming agent to evaluate the possibility of use in the structural elements. We proposed the estimating equation for compressive strength of each mix having different ratio of foaming agent. We also confirmed that the density of cement matrix is decreased as the mixing amount of foaming agent increase up to 0.6% of foaming agent mixing ratio which was observed by SEM. Based on porosity and compressive strength of control mortar without foaming agent, we built the estimating equations of compressive strength for mortars with foaming agent. The upper limit of use in foaming agent is about 0.6% of the binder amount. Each air void is independent, and size of voids range from 50 to $100{\mu}m$.

• 전기화학회지
• /
• 제5권2호
• /
• pp.74-78
• /
• 2002

아연공기전지는 공기중의 산소를 사용하므로 cathode의 재활용이 가능하다는 장점이 있으며 아연의 이론용량이 820(mAh/g)으로 상당히 높다. 그러나, 아연공기전지는 cathodf치 기공이 너무 작으면 외부로부터 유입되는 산소량이 부족하여 전지의 방전전압이 낮아지는 결과를 초래하게 되며 cathode에 포함되어 있는 도전재의 함량에 따라 저항 및 기공율에 많은 변화를 보이고 있다. 이에 본 연구에서는 전지의 용량, 출력특성, 방전전압, DC저항, ASTM에 의한 기공율 측정을 통해 도전재의 종류 및 함량이 아연공기전지에 미치는 영향을 연구하였으며, Super P의 도전재를 $5wt\%$ 첨가하였을 때 가장 우수한 전지특성을 얻을 수 있었다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.896-905
• /
• 1996

Pressure drop, as a function of air flow, was measured for tomatoes and mandarins in bulk with different sizes, stacking arrangements and bed porosities. Pressure drop was also measured on carton vent holes and on a carton of packed fruits . and the cumulative effects of air flow resistance of vent holes and packed fruits in bulk on the air flow resistance of a carton of fruits were evaluated . Equation were presented to describe pressure drop bulk fruits, of an empty carton and of a carton of packed fruits as related to the air velocity , the bed porosity, the fruit diameter and the opening ratio of the vent hole.

• 상하수도학회지
• /
• 제22권6호
• /
• pp.681-687
• /
• 2008

It is well known that the water infiltration rate depends on soil properties such as soil water content, water head, capillary suction, density, hydraulic conductivity, and porosity. However, most of proposed infiltration models assume that the air phase is continuous and in equilibrium with the atmosphere or air compression and air entrapment on infiltration was not considered. This study presents experimental results on unsaturated water infiltration to relate air entrapment and hydraulic conductivity function based on soil air properties. The objectives of this study were to measure change of soil air pressure ahead of wetting front under air drain and air confined condition to find the confined air effect on infiltration rate, to reduce the entrapped air volume related with soil air pressure to increase the soil permeability, and to make a basis of infiltration process model for the purpose of improvement of infiltration rate in the homogeneous soil column. The results of the work show that soil air pressure increases according to increasement of the saturated soil depth rather than the wetting front depth during infiltration process.

• 한국재료학회지
• /
• 제18권12호
• /
• pp.645-649
• /
• 2008

Graphite for the nuclear reactor is used to the moderator, reflector and supporter in which fuel rod inside of nuclear reactor. Recently, there are many researches has been performed on the various characteristics of nuclear graphite, however most of them are restricted to the structural and the mechanical properties. Therefore we focused on the thermal property of nuclear graphite. This study investigated the thermal emissivity following the oxidation degree of nuclear graphite with IG-11 used as a sample. IG-11 was oxidized to 6% and 11% in air at 5 l/min at $600^{\circ}C$. The porosity and thermal emissivity of the sample were measured using a mercury porosimeter and by an IR method, respectively. The thermal emissivity of an oxidized sample was measured at $100^{\circ}C$, $200^{\circ}C$, $300^{\circ}C$, $400^{\circ}C$ and $500^{\circ}C$. The porosity of the oxidized samples was found to increase as the oxidation degree increased. The thermal emissivity increased as the oxidation degree increased, and the thermal emissivity decreased as the measured temperature increased. It was confirmed that the thermal emissivity of oxidized IG-11 is correlated with the porosity of the sample.