• Journal of the Korean Society of Tobacco Science
• /
• v.5 no.2
• /
• pp.9-15
• /
• 1983

The effect of leaf dehydration process and air flow capacity of bulk curing on physical properties and composition of cured leaves was studied, respectively, during flue- curing. Cured leaves from excessive moisture during yellowing stage and those from rapid dehydration Process inevitably during later stages, tend towards lower equilibrium moisture contents, higher shatter index, hither protein nitrogen, and leaf scalding or deterioration of Beaves with redish cast. Early dehydration at the yellowing stage re suited in increasing of p Bamitic, stearic, linoleic, and linolenic acid contents, but showed reduction of brightness difference between upper and lower surface of the cured leaves, Leaf surface lipid decreased with the progress of curing stages, more conspicuously during later stage. Lowering air flow capacity of fan by 50oye during stem drying stage resulted in increasing of leaf surface lipid and 25oye decreasing of electric power consumption , but curing period and kerosene consumption were not affected.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.217-222
• /
• 2003

The steel slag, a by-product which is produced during the manufacture of steel by refining pig iron, is mainly used as road materials after aging it. It is necessary to age steel slag for long time in air because the reaction with water and free-CaO in steel slag could make the expansion of volume. This problem prevents steel slag from being used as aggregate for concrete. But steel slag used in this study was controled by an air-jet method which rapidly cools substance melted at a high temperature. Rapid cooling prevents from generation of free-CaO in steel slag. In this study, properties of steel slag manufactured by air-jet method and mortar used it were investigated. As results of this study, free-CaO contents were controled under 1%. Mortar used this steel slag demanded to lower water contents, higher compressive strength and lower drying shrinkage than the basic mortar in the same condition.

• Journal of Chitin and Chitosan
• /
• v.22 no.2
• /
• pp.110-117
• /
• 2017

This study was conducted to examine the physicochemical properties and hot air-dried and spray-dried powders process of sweet potato and steamed sweet potato. The moisture and the total starch contents were 1.66~2.19% and 52.65~57.42%, respectively. The total starch contents increased during process steaming. The water absorption index of the spray-dried powders (0.97 and 2.03) was lower than that of the hot air-dried powders (2.12 and 4.71), and the water solubility index of the spray-dried powders (83.83 and 86.95%) was higher than that of the hot air-dried powders (68.40 and 81.21%). The particle size and outer topology of the spray-dried powders were 46.18 and $65.53{\mu}m$, and its shape was generally globular. In the DSC analysis of this study, the $T_o$ of the spray-dried powders (64.40 and $67.80^{\circ}C$), $T_p$ of the spray-dried powders (74.40 and $78.20^{\circ}C$), and $T_c$ of the spray-dried powders (81.10 and $81.60^{\circ}C$) was higher than that of the hot air-dried powders. The solubility contents of the spray-dried powders (68.21 and 80.73%) was lower than that of the hot air-dried powders, and the swelling power contents of the spray-dried powders (14.79 and 15.35%) was higher than that of the hot air-dried powders. The amylose contents of spray-dried powders (11.67 and 12.51%) was lower than that of the hot air-dried powders. The soluble dietary fiber contents of spray-dried powders (1.34 and 2.02%) was higher than that of the hot air-dried powders.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.679-682
• /
• 2004

Air void systems in hardened concrete has an important influence on concrete durability such as freeze-thaw resistance, water permeability, surface scaling resistance. Linear traverse method and point count method described at ASTM is the routine analysis of the air void system that have been widely used to estimate the spacing factor in hardened concrete. Recently, many concretes often have a spacing factor higher than the generally accepted $200-250{\mu}m$ limit for the usual range of air contents. This study is proposed to estimate the matrix spacing factor by calculation of simplicity. The matrix spacing factor needs two parameters that are air content and numbers of air voids in the hardened concrete. Those are obtained from the standard air-void system analysis of the ASTM C 457. The equation is valid for all values of paste-to-air ratio because the estimation of paste content is unnecessary at the using ASTM C 457. The matrix spacing factor yields a similar estimate of the standard spacing factor.

• The Korean Journal of Ecology
• /
• v.13 no.2
• /
• pp.143-148
• /
• 1990

During the autumn of 1985, the stem cortex of Salix pseudo-lasiogyne on the street sides in Seoul city was collected by a cork borer. The contents of S, Pb and Cd in this sample were determined. The ranges of S, Pb and Cd contents in all the samples were 0.98-3.46$\mu$/g, 0.77-1.81$\mu$g/g and 0.12-0.28$\mu$/g, respectively. Areas which slowed the highest level of S, Pb and Cd in the stem cortex were Yongon-dong, Yongdungp o, Ulchiro, Ch ongnyangni, Shinch on and Suyu-dong, Yongdungp o, Ulchiro and Ch ongnyangni, and Yongon-dong, Yongdungp o and Ch ongnyangni, respectively

• Journal of the Korean Society of Industry Convergence
• /
• v.11 no.1
• /
• pp.5-10
• /
• 2008

A flame speed of methane mixture of water vapor and air have been measured to study the process of flame propagation using schlieren photographs. The quantity of water vapor contained were changed 5% and 10% of total mixture, and equivalence ratio of mixture between 0.8 and 1.2 were tested under the ambient temperature 323K and 373K. The results showed that the burning velocity was decreased by increasing the water vapor contents due to the interruption of flame development. And, the reduction rate of burning velocity was smaller by increasing the water contents under the same ambient temperature. The effects of ambient temperature on burning velocity was decreased by increasing the water vapor contents.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.27-30
• /
• 2006

This study investigated influence of organic fiber type and contents on engineering properties of concrete. Test showed that increase of fiber contents decreased fluidity of fresh concrete and it was even worse in concrete adding cellulose fiber. It is decided that concrete containing more than proper level of fiber should be considered. In addition, concrete adding more fiber, nylon and cellulose, resulted in increase of air content but it was satisfied in aimed value. Bleeding capacity of concrete containing more fiber significantly declined and setting time of that was also slightly retarded. For the properties of strength, both compressive and tensile strength of fiber containing concrete were indicated at similar value to control concrete. However, it is clear that if those concrete containing fiber revised the value of increased air contents at fresh state, the strength value of that would be slightly increased.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.929-932
• /
• 2000

In this paper, physical properties of fresh and hardened mortar for floor using expansion agent are described under various grain shape, grading and chloride contents of aggregates. According to experimental results, as fineness modulous increase, fluidity show high it also shows high with cement mortar using riversand and continuous distribution of grading. We can not detect any difference in fluidity according to chloride contents. Air content shows to be decreased with crushed stone having large fineness modulous and continuous distribute on of grading. chloride content does not influence on the air content. compressive strength tends to increase when crushed sand with continuous distribution of grading is used and chloride contents decreases.

• Journal of Korean Society of Forest Science
• /
• v.78 no.4
• /
• pp.360-371
• /
• 1989

This study was performed to investigate effects of air pollution on the Pinus thunbergii forests in Onsan industrial districts, and environmental factors, contents of soluble sulfur in needles, and composition of sorest vegetation were examined. The results obtained in this study were summarized as follows ; 1. The pH of soils, organic matter and total N were low near the source of air pollutants, and sulfur contents in the soils was high in general. Especially there was significant correlation between the sulfur contents in the soil and pH at 1% level. 2. The contents of soluble sulfur in needles ranged from 0.13% to 0.25% and were generally high, and plot 2 and 3 were the highest of all. 3. In the number of species, 7 species appeared in plot 3 and 20 species in plot 7, and they were low near the source of air pollutants. Total number of individuls, species diversity and evenness increased with in creasing distance from the source of air pollutants. 4. There were significant correlations between the contents of soluble sulfur in needles and the number of species and species diversity at 5%, 1% level, respectively. 5. Importance value of each species was low near the source of air pollutants but Quercus species showed high values in all plots. 6. On these studied plots, Pinus thunbergii, Quercus serrata and smilax china were tolerant, and Rhododendron mucronulatum, Rhododendron yedoense var. poukhanense, Platycarya strobilacea and Lespedeza maritima were sensitive to air pollution.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.66-69
• /
• 2003

Chloride ingress into concrete followed by reinforcement corrosion and deterioration of concrete structures is a major problem for many structures under chloride attacks. It is necessary to investigate the environmental conditions of concrete structures exposed to chloride attacks. In this study, the air-borne chloride contents in domestic marine environment were investigated.