• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.3
• /
• pp.250-256
• /
• 2008

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.2
• /
• pp.183-190
• /
• 2007

In this study, we have investigated waste incinerators which are one of the major HAPs emission sources. In order to obtain more reliable HAPs emission data from waste incinerators, direct sampling for the possible pollutants from the stack was carried out and the analysis was performed. The purpose of study was to understand the emission status from waste incinerators and recognize the problems and finally to set up a strategy to reduce the HAPs emissions from waste incinerators. The emission concentrations of 8 species of heavy metals and 16 species of PAHs have been analyzed for the first time in Korea. Not only the emission characteristics of HAPs from waste incinerators were identified, but also the analysis of reduction efficiencies for control devices such as BF and wet scrubbing systems was carried out.

• Particle and aerosol research
• /
• v.15 no.4
• /
• pp.159-171
• /
• 2019

The cap-and-trade system against the air pollutants in the Seoul Metropolitan Area (SMA), Korea has been implemented since 2008 and will be implemented other areas in Korea on 2020. In this study, to identify the outcome and effectiveness of the cap-and-trade system in the SMA, (1) the rate of change for NOx and SOx emissions, (2) differences between the real emission and allocated amount, and (3) the status of trading are reviewed. It was found that the NOx and SOx emissions from the sources under the cap-and-trade system decreased in the SMA but the reduction was mainly due to the reduction of fuel usage not related to the system. It was found that the average percentage of annual emission in the SMA to the allocated amount between 2008 and 2018 was 66.9% for NOx and 69.3% for SOx, respectively. It suggests that there was over allocation of the emission amounts. The average trading prices in the SMA were 0.193 $/kg for NOx and 0.128 $/kg for SOx, far lower than those in RECLAIM, 131.942 $/kg and 81.677 $/kg, respectively. It was suggested that (1) the cap system for NOx and SOx emissions should be implemented only for the area with high emission ratio from large point sources, (2) the trade system is not suitable for the effective implementation of the cap system, and (3) Korean government should not allow over allocation in order to ensure sound market function without delaying the introduction of technology.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.3
• /
• pp.405-415
• /
• 2019

This study examined the physiological and psychological effects of wearing a winter cap at rest in a cold environment. Seven older males participated in two separate trials: wearing a winter cap (CAP) and non-wearing a winter cap (CON). The experiment was conducted for 60 min in a climatic chamber (air temperature $7.8{\pm}0.3^{\circ}C$ with $43{\pm}2%RH$) with sedentary posture. Microclimate temperature at the vertex of the head was $6.88^{\circ}C$ higher in CAP compared to CON (p<.01). Microclimate humidity at the vertex was lower in CAP than in CON only during the last 5 min (p<.01). Skin temperature at the forehead in CAP was higher than in CON (p<.01). During the last 5 min, rectal temperature was higher in CAP than that in CON (p<.05). Unlike CAP, the heart rate in CON during the last 5 min decreased significantly compared to the initial 5 min (p<.05). Subjects also felt less cold on the head/face in CAP than that in CON (p<.01). The results indicate that wearing a cap for elderly males positively affected body temperature regulation and cardiovascular response in cold environments. The importance of wearing warm hats for elderly males in winter should be emphasized.

• Medical Lasers
• /
• v.9 no.2
• /
• pp.187-189
• /
• 2020

Cold atmospheric plasma (CAP) is a material that generates free radicals through the ionization of air. Despite the application in various medical fields, the efficacy and safety of CAP on post-inflammatory hyperpigmentation due to atopic dermatitis have not been reported. Herein, we report the improvement in post-inflammatory hyperpigmentation of atopic dermatitis, after CAP treatment of three sessions weekly, 10 minutes per session. We examined the clinical severity indexes before and after treatment, including the Investigator's Global Assessment, modified Atopic Dermatitis Antecubital Severity, Eczema Area and Severity Index, and pruritus visual analogue scores. Our results indicate that CAP alleviates the post-inflammatory hyperpigmentation and clinical severity of atopic dermatitis, and effectively improves the atopic skin lesion without severe safety issues. We believe that the previously reported anti-bacterial effects and production of interleukin-6 after CAP treatment are probably responsible for the underlying mechanisms leading to clinical improvement.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.3C no.5
• /
• pp.165-170
• /
• 2003

This paper presents development of solid core suspension disc insulators (cap and cap suspension disc insulator) for replacing cap and pin suspension disc insulators in overhead transmission and distribution lines which expose to lightning discharges. By this means the punctured problem caused by steep front surge voltage created by lightning discharge on the lines can be solved. The solid core suspension insulator was designed and constructed based on the dimensions of conventional suspension disc insulators (cap and pin insulators). The insulators are made of alumina porcelain. The electrical and mechanical characteristics of the solid core suspension insulators were carried out. The puncture test was performed in the air by applying steep front impulse voltage with amplitude about 2.5 per unit of 50% flashover (CFO) of the insulator unit at negative standard lightning impulse $1.2/50\;\mu\textrm{s}$ with steepness up to $9200\;kV/\mu\textrm{s}$. The testing results show that solid core suspension disc insulators are not punctured eventhough the steepness of the steep front impulse voltage was increased up to $9200\;kV/\mu\textrm{s}$.

• KIEAE Journal
• /
• v.15 no.1
• /
• pp.77-82
• /
• 2015

The purpose of this study is to compare the thermal insulation performance of windows according to the formation of air layer and to evaluate its energy efficiency on a selected standard house. A thermal insulation test, KS F 2278 was used to measure U-values (Heat transmission coefficients) for the following three cases: the first case (Case 1) is a Low-E pair glass (Argon injected), the second case (Case 2) is a Low-E pair glass with the air cap attached on the glass surface, and the third case (Case 3) is a Low-E pair glass, on the frame of which the air cap is attached. The evaluation of the energy efficiency was conducted according to a building energy calculation method from ISO 13790, calculation of energy use for space heating and cooling, using the U-values obtained from the thermal insulation tests. As results of the tests, the U-values of Case 1, Case 2, and Case 3 were $1.668W/m^2{\cdot}K$, $1.568W/m^2{\cdot}K$, and $1.319W/m^2{\cdot}K$ respectively. The Case 2 had about 5.9% lower value than the Case 1, and the Case 3 had about 20.9% lower value than the Case 1. It seems that the thermal performance of the windows is attributed to an increase of the heat resistance and the thickness of air layer. An evaluation of the energy efficiency of the three cases on the selected standard house showed that the amount of heating energy demand per unit area was $7.776kWh/m^2{\cdot}yr$ for the Case $1,6.856kWh/m^2{\cdot}yr$ for the Case 2, and $4.856kWh/m^2{\cdot}yr$ for the Case 3. This study suggests that the formation of air layer (by using air cap) and its thickness should reduce the heat energy demand and thus improve the energy saving efficiency

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.9
• /
• pp.1278-1284
• /
• 2017

Objective: To assess the potency of calcium propionate (CAP) used as silage additive, an experiment was carried out to evaluate the effect of CAP on the nitrogen transformation, fermentation quality and aerobic stability of alfalfa silages. Methods: Alfalfa was ensiled with four levels of CAP (5, 10, 15, and 20 g/kg of fresh weight [FW]) in laboratory silos for 30 days. After opening, the silages were analyzed for the chemical and microbiological characteristics, and subjected to an aerobic stability test. Results: The increasing proportion of CAP did not affect pH, lactic acid (LA) concentrations and yeast counts, while linearly decreased counts of enterobacteria (p = 0.029), molds (p<0.001) and clostridia (p<0.001), and concentrations of acetic acid (p<0.001), propionic acid (p<0.001), butyric acid (p<0.001), and ethanol (p = 0.007), and quadratically (p = 0.001) increased lactic acid bacteria counts. With increasing the proportion of CAP, the dry matter (DM) loss (p<0.001), free amino acid N (p<0.001), ammonia N (p = 0.004), and non-protein N (p<0.001) contents were linearly reduced, whereas DM (p = 0.048), water soluble carbohydrate (p<0.001) and peptide N (p<0.001) contents were linearly increased. The highest Flieg's point was found in CAP10 (75.9), represented the best fermentation quality. All silages treated with CAP improved aerobic stability as indicated by increased stable hours compared with control. Conclusion: The addition of CAP can suppress the undesirable microorganisms during ensiling and exposure to air, thereby improving the fermentation quality and aerobic stability as well as retarding the proteolysis of alfalfa silage. It is suggested that CAP used as an additive is recommended at a level of 10 g/kg FW.

• Smart Media Journal
• /
• v.5 no.4
• /
• pp.9-17
• /
• 2016

Over the next 20 years it will begin the exodus from the Internet and smart phones to the Internet of Things. The heart of IoT gives new utility and value with connectivity among things around people to the human. In future, Industrial environment will be intimately connect all among machines and machines or factories and factories in all processing, and by digitizing of all goods and production life-cycle, which is a combination of virtual world and real world, the digital factory will become reality eventually. The proposed IoT or IIoT based Download OTA (Over-the-Air) provides a flexible mechanism for downloading Media objects of any type and size from a network. Moreover, proposed IoT based DLOTA provides a part of security by lightweight encryption, OTP, and CapBAC technique.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.4
• /
• pp.436-441
• /
• 2009

An air filter is a device to remove dust from the air supplied to the automotive engine. A requirement for the optimum air filter is to improve the capability to remove particles from the air it takes in, that is the efficiency and amount of dust collection. By removing dust from the air, the air filter prevents the engine cylinder from wear, reduces ventilation resistance, and thus improves engine output and guarantees intake performance. In order to guarantee such air filter performance, it is very important to properly seal the air filter. For passenger cars made in Korea, the air filters are fabricated with steel caps as their frames are large and their engine capacity is big. Recently however, European countries and Japan started using urethane for manufacturing the air filter, so that all foreign-made cars now have urethane filters. The urethanes used for air filters are applied in two ways: One is to use soft urethane for both top and bottom of the air filter and the other is to use soft urethane for the top and hard urethane for the bottom. Each of these method has unique problems. In this study, hard urethane is used for both top and bottom of the filter in order to improve those problems and increase the sealing efficiency. Especially for the top, NBR (rubber mold) is pre-settled in tough urethane and then the urethane is solidified through foaming, which makes it possible to develop a solid and double-sealed filter.