• 설비공학논문집
• /
• 제20권1호
• /
• pp.1-10
• /
• 2008

A transient 3-D numerical simulation was performed to analyze the fire safety in a railway tunnel equipped with a mechanical ventilation system. The behavior of pollutants was studied for the emergency operation mode of ventilation system in case of fire in the center of the rescue station and near the escape route. Various schemes of escape route construction for connection angle($45^{\circ}$, $90^{\circ}$, 135^{\circ}$) and slope($10^{\circ}$) were evaluated for the ventilation efficiency in the fire near the escape route. From the results, it was shown that the mode of the ventilation fan operation which pressurizes the tunnel not under the fire and ventilates the smoke from the tunnel under the fire is most effective for the smoke control in the tunnel in case of the fire occurrence. It was also shown that the blowing of jet fan from the rescue tunnel to the main tunnel should be in the same direction as the flow direction in the main tunnel arising from the traffic and the buoyancy.

• 한국철도학회논문집
• /
• 제18권6호
• /
• pp.513-521
• /
• 2015

수도권광역급행열차(GTX)가 대심도 지하터널을 180km/h로 운행하면, 작은 터널단면적으로 인해 터널 압력파에 의한 승객이명감이 문제될 것으로 예상된다. 이에 대한 대책으로 GTX의 적절한 기밀성능이 확보되어야 한다. 본 논문에서는 1D 전산해석을 수행하여 객실 압력변동 기준을 만족하는 차량기밀도를 도출하였다. A라인 37km 지하터널과 해당구간의 영업운행 상황을 모사하여 차량내부 압력변동을 예측하였다. 전산해석결과 이명감 방지를 위한 차량의 기밀도 요구성능은 복선구간에서 3초 이상, 단선구간에서 6초 이상으로 나타났다. 본 연구의 결과는 GTX 차량 제작 시 차체기밀도 요구성능 결정을 위한 유용한 자료로 활용될 수 있다.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2732-2741
• /
• 2000

Combination of magnetic recording technology and optical recording technology such as Near Field Optical Recording is watched recently. In order to accomplish this technology, the development of an electromagnetic driven mm-sized mirror shifting laser beam in track direction have to needed. In Near Field Optical Recording System, shifting laser beam in track direction mean as fine tracking and means as coarse tracking. Therefore in Near Field Optical Recording, 2-stage actuator is composed of servo controller in reading or recording information on disc layer. In our research, through design and simulation process of driven mm-sized mirror, we arrange systematically design process of driven mm-sized mirror having good frequency transfer characteristics. Design and simulation processes included modal analysis of spring, calculation of magnetic moment according to the number of turns and geometric configuration of coil and magnetic circuit analysis meaning that calculation of magnetic flux density in air gap of magnetic circuit. After that we design and make parts of driven mm-sized mirror, assemble and evaluate our electriomagnetic driven mm-sized mirror. we compared design values with actual characteristic values and present solution scheme. Through these processes we performed manufacturing of an electromagnetic driven mm-sized mirror having good frequency-domain characteristics and high sensitivity characteristics.

• KSTLE International Journal
• /
• 제3권1호
• /
• pp.38-42
• /
• 2002

Diamond-like Carbon(DLC) films were deposited on Si wafers by an RF-plasma-assisted CVD using CH$_4$gas. Tribological tests were conducted with the use of a rotating type ball on a disk friction tester with dry air. This study made use of four kinds of mating balls that were made with stainless steel but subjected to different annealing conditions in order to achieve different levels of hardness. In all load conditions, testing results demonstrated that the harder the mating materials, the lower the friction coefficient was. The friction coefficients were fecund to be lower with austenite mating balls than with fully annealed martensite balls. Conversely, the high friction coefficient found in soft martensite balls appeared to be caused by the larger contact area between the DLC film and the ball. The wear tracks on DLC films and mating balls could prove that effect. Measuring the wear track of both DLC films and mating balls revealed a similar tendency compared to the results of friction coefficients. The wear rate of austenite balls was also less than that of fully annealed martensite balls. Friction eoefficients decrease when applied leads exceed critical amount. The wear track on mating balls showed that a certain amount of material transfer occurs from the DLC film to the mating ball during a high friction process. Raman Spectra analysis Showed that the transferred materials were a kind of graphite and that the contact surface of the DLC film seemed to undergo a phase transition from carbon to graphite during the high friction process.

• Journal of Radiation Protection and Research
• /
• 제14권2호
• /
• pp.18-22
• /
• 1989

CR-39 고체비적검출기를 교정하기 위하여 밀봉 순환 방식의 고체비적검출기 교정 장치와 밀리포어필터가 부착된 라돈컵을 제작한 후 기지의 라돈농도에 대한 비적 수를 측정하였다. 그 결과 CR-39 고체비적검출기의 단위 면적당 생성된 비적 수에 대한 시간 적분 라돈 농도는 $0.24{\pm}0.09(pCi/l){\cdot}day/(Tr/cm^2)$ 였다.

• 한국항공운항학회지
• /
• 제28권1호
• /
• pp.7-13
• /
• 2020

A significant growth in local air traffic volume is leading to airway congestion and flight delays especially for Incheon-China and Incheon-Europe sectors. A key method to increase the airway capacity is to place a supplemental airway parallel to the existing one and in cooperation between the aviation authorities between China and Korea, a dual airway track was implemented on December 6, 2018. Here, we use airline A's flight data to analyze the congestion change effect of the new airway. Results show total delay time to Europe is reduced 51% (13.4 to 6.6 minutes) as the delay distribution for 16-30 minutes, 31 minutes and greater decreased from 23.2% to 8.2% and 8.7% to 1.0% respectively. The delay to China also decreased but the drop is not as significant as flights to Europe. This is caused by the difference in flight distance, traffic volume, and characteristics of flights landing and transiting China. Flights to Europe show a broad distribution in altitude allocation and reduction in aircraft separation demonstrating the effectiveness of a dual airway track.

• Journal of Radiation Protection and Research
• /
• 제22권4호
• /
• pp.243-250
• /
• 1997

공기 중의 라돈 농도를 측정하기 위한 고체비적검출기의 상대교정법을 개발하였으며, 상대 교정된 CN-85를 이용하여 15층 아파트 층 별로 실내 공기 중의 라돈 농도를 측정한 후 피폭 선량을 계산하여 보았다. 측정 결과 아파트 실내 공기 중에서의 라돈 농도는 대체적으로 상층으로 올라갈수록 감소하는 경향이 있었으나, 환기 횟수에 크게 영향을 받음을 알 수 있었다. 측정값의 평균은 $1.50{\pm}0.51pCi/1$ 였으며, 최대값과 최소값은 각각 $2.68{\pm}0.32pCi/l$, $0.69{\pm}0.16pCi/l$였다.

• 소성∙가공
• /
• 제23권6호
• /
• pp.345-350
• /
• 2014

The current study elucidates the effects of cementite spheroidization and pro-eutectoid ferrite on the sliding wear resistance in medium carbon (0.45wt%C) and high carbon (1wt%C) steels. Both steels were initially heat treated to obtain a fully pearlite or ferrite + pearlite microstructure. Spheroidizing heat treatments were performed on both steels to spheroidize the pearlitic cementite. Sliding wear tests were conducted using a pin-on-disk wear tester with the steel specimens as the disk and an alumina ($Al_2O_3$) ball as the pin. The sliding wear tests were carried out at room temperature in air with humidity of $40{\pm}2%$. Adapted sliding distance and applied load was 300m and 100N, respectively. Sliding speed was 0.1m/s and the wear-track radius was 9 mm. Worn surfaces and cross-sections of the wear track were examined using an SEM. Micro Vickers hardness of the wear-track subsurface was measured as a function of depth from the worn surface. Hardness and sliding-wear resistance of both steel decreased with increased spheroidization of the cementite. The decrease was more significant in the fully pearlitic steel (1wt%C steel). The steel with the pro-eutectoid ferrite showed relatively higher wear resistance compared to the spheroidized pearlitic steel.

• 대한기계학회논문집A
• /
• 제37권9호
• /
• pp.1077-1082
• /
• 2013

경기력 향상을 위한 자전거 프레임을 제작하기 위하여 주행 시 자전거 프레임에 발생하는 항력을 고려한 공기역학적 설계가 필요하다. 이를 위해 국제 사이클연맹 규격에 맞추어 초기 프레임을 설계 및 제작을 하였고 프레임에 발생하는 항력을 정량적 척도로 판단하기 위하여 항력계수를 이용하였다. 자전거 프레임의 공기저항을 최소화하기 위해 프레임 단면의 파라미터 설계를 실시하여 최적의 프레임의 형상을 도출하였다. 또한 자전거 프레임은 주행 시 선수에 의한 하중을 견딜 수 있어야 한다. 구조적인 측면에서 안정성을 갖춘 프레임을 제작하기 위하여 국제 사이클 연맹규격에서 제시하는 하중조건을 근거로 프레임의 강성을 평가하였고 이를 통해 선수용 자전거 프레임을 개발하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.678-684
• /
• 2011

In 2013, Korea will become the world's second country to operate the urban Maglev system with the inauguration of demonstration line at Incheon International Airport. A prototype Maglev is under the test at KIMM's(Korea Institute of Machinery & Materials, Daejeon) track. This Maglev is an EMS(Electromagnetic suspension)-type vehicle of controlled $8{\pm}3mm$ air gap. The air gap between electromagnet and the guiderail in an EMS-type Maglev must be maintained within an allowable deviation by controlling the magnet. The air gap response is strongly dependent on the structural characteristics of the elevated guideway. For this reason, the interaction between the vehicle with electromagnets and the elevated guideway must be understood to ensure safe running. The purpose of this paper is to compare vibration characteristics of the vehicle on the switching system and other sections when the full weight condition of urban maglev vehicle that 26.5 tons per car(empty car weight 19 tons + passenger condition 7.5 tons), is applied. Through such results, Maglev vehicles and switching system can be established and the levitation stability can be improved.