• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.5
• /
• pp.98-106
• /
• 2002

The airflow characteristics of an air-conditioning duct with multiple diffusers were investigated through one-dimensional analysis, CFD simulation and experimental measurement. One-dimensional program based on Bernoulli's equation and minor loss equations was developed in order to evaluate the air distribution rate at each diffuser. In CFD simulation, three-dimensional flow characteristics inside air-conditioning duct were computed for incompressible viscous flow, adopting the RNG k-$\xi$turbulence model. Also, in an effort to equalize the discharge flow rate at each outlet, the optimization procedure has been performed to obtain the optimum diffuser area. In this process, square of difference between maximum discharge rate and minimum discharge rate is used as an object function. Diffuser area and discharge velocity are established as constraints. After optimization process, determined design variables are applied again in CFD simulation and experiment to validate the optimized result by one-dimensional program. Comparison with the experimental data of airflow rate distribution showed that the developed program seems to be acceptable and can be useful design tool for an automotive air-conditioning duct in an initial design stage.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.1 s.139
• /
• pp.10-17
• /
• 2005

Due to emission of vehicles during loading/unloading, ventilation system in Roll-on/Roll-off ship is inevitable; however it is very difficult to predict the ventilation performance before it is finally built in. Although the requirements for the ventilation system include air change rate and maximum allowable concentration of CO in the cargo holds, even prototype tests are hardly able to quantify the ventilation performance. In the present paper, a new method to assess the ventilation performance of Roll-on/Roll-off ship is proposed by using computational fluid dynamics. The air exchange is modeled by introducing multi-species transport of existing air In the holds and new air from the ventilation system. Conservation of multi-species as well as 3D Navier-Stokes equation are solved numerically in time dependent manner. Several cases of different configuration are considered. The results include predicted mass fraction of new air in the holds. It is also presented that CO concentration can be estimated based on the predicted air change performance. Due to the lack of experimental data, the computed results are not verified; however the proposed method can be applied as au assessment tool.

• Journal of Powder Materials
• /
• v.22 no.3
• /
• pp.157-162
• /
• 2015

SKD11(ASTM D2) tool steel is a versatile high-carbon, high-chromium, air-hardening tool steel that is characterized by a relatively high attainable hardness and numerous, large, chromium rich alloy carbide in the microstructure. SKD11 tool steel provides an effective combination of wear resistance and toughness, tool performance, price, and a wide variety of product forms. Adding of CNTs increased the performance of mechanical properties more. 1, 3 vol.% CNTs was dispersed in SKD11 matrix by mechanical alloying. SKD11 carbon nanocomposite powder was sintered by spark plasma sintering process. FE-SEM, HR-TEM and Raman analysis were carried out SKD11 carbon nanocomposites.

• Journal of Korean Society of societal Security
• /
• v.2 no.1
• /
• pp.65-74
• /
• 2009

In this study, the air pollution management system based GIS has been developed to estimate the emission rate and air pollution modeling of air pollutants, effectively. This system is able to estimate emission rate of air pollutant and to analyze the emission characteristics with high spatial and temporal resolution. air pollution modeling. The air pollution management system was applied to Gwangyang Bay including large industry complex with a large number of emission sources. The air pollution management system was constructed using the spatial database of emission sources in Gwangyang Bay. It was found that the estimated emission rates of air pollutants is similar to the emission characteristics in Gwangyang Bay. Also, the spatial distribution of pollutants was similar to the location of emission sources. The predicted results of air pollution model was showed a good correlation coefficient (0.75) for TSP. The air pollution management system is expected to be effective tool (database system (GIS)) for the management and the control of air pollution.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.5
• /
• pp.722-727
• /
• 2018

Until now, the study of fine dust has been divided into prediction, analysis and measurement, mainly in the field of atmospheric environment. Fine dust is caused by various causes such as atmospheric quality factor, meteorological factor and emission. It was determined that it was a priority to analyze the correlation of how much each element affects fine dust, and it was experimented. This correlation analysis was done using IBM SPSS tool using air quality factor and meteorological factor data obtained from Korea Meteorological Administration and Air Korea. As a result, the influence of air quality factors and meteorological factors on the fine dust level was more clearly understood. In this paper, we present experimental results as correlation analysis and pearson coefficient for more precise analysis between PM10 values and affected factors.

• Journal of Environmental Health Sciences
• /
• v.43 no.3
• /
• pp.202-213
• /
• 2017

Objectives: HRA (Health Risk Assessment) is an important tool for measuring the health impacts of air pollution. HRA is already being used widely as an important reference for crafting air pollution policies. However, the absence of a domestic CRF (Concentration Response Function) standard, which is a main component for HRA, could cause confusion amongst policy-makers. The purpose of this study is to tabulate a domestic CRF standard for a PM (Particulate Matter)-related HRA. Methods: This study suggested a domestic CRF standard for HRA thorough a literature review. The literature review for meta-analysis was limited to the English language for epidemiological studies published from January 1980 to March 2016. This meta-analysis was conducted by assuming both fixed- and random-effects of CRF. In addition, studies that reported HRA of air pollution for WHO (World Health Organization), the EC (European Commission), and the EPA (Environmental Protection Agency) were reviewed to compare the CRFs of South Korea to the recommended CRFs of WHO, the EC, or the EPA. Additionally, a domestic CRF standard was supplemented by these. Results: Nineteen studies were selected for the CRF for South Korea. Fifty-three CRFs were derived for meta-analysis. CRFs with a standard for PM-related HRA were divided according to the following four criteria: air pollution, exposure characteristics, type of health impact, and age group. Finally, a domestic CRF standard was created comprised of 21 CRFs. Among these, six CRFs were derived from the results of foreign HRA studies. Conclusions: This study is important in that a domestic CRF standard is first suggested. In addition, this study suggests a further area of study for using HRA as a policy tool and a direction of epidemiological study.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.4 s.59
• /
• pp.852-869
• /
• 1997

This study was conducted to develop and evaluate the reliability and the validity of a questionnaire in order to determine the applicability as a screening tool for estimating environmental exposure and health effects related to air pollution. The questionnaire was developed with adopting some items of others such as ISAAC or ATS-DLD. And then we performed test-retest to 89 middle school students and their mothers at interval of three months. Cohen's Kappa values, weighted Kappa values, Spearman's correlation coefficients, and Pearson's correlation coefficients for each item were computed as reliability coefficients. The validity coefficients and validity coefficient bounds were also obtained by simply using these reliability coefficients. As results, Kappa ranged broadly from 0.10 to 0.61 of the items 'diet', $0.52\sim0.79$ of the environmental tobacco smoke, $0.39\sim0.44$ of the functional categories of surrounding environment, and $0.39\sim0.44$ of the using transportation systems; these items were regarded as confounding factors. For items related to health outcomes, Kappa ranged from -0.02 to 0.37 in the respiratory system of past medical history, and from 0.11 to 0.55 in the current health status. But Kappa of the others were over 0.60. In conclusion, if some items can be corrected or modified, the questionnaire developed in this study can be used as a tool for evaluating environmental exposure and health effects associated with air pollution.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.4
• /
• pp.422-426
• /
• 2011

The spindle system is very important unit for the product accuracy in machine tools. A spindle system is designed by using the angular contact ceramic ball bearings, built-in motor, oil-air lubrication method and oil jacket cooling method. The static and dynamic analysis and stiffness evaluation of 45,000rpm spindle for machine tool has been investigated. Using a finite element method, we obtained some analyzed a static and dynamic characteristics of a spindle, such as natural frequency, harmonic analysis and we got the value of compliance through it. We evaluated stiffness by taking the inverse this value. A 45,000rpm spindle is successfully developed using the results.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.358-360
• /
• 1997

The train control and monitoring system(TCMS) is an on board computer system in railway vehicles performing the control, supervisory and diagnostic functions of the complete train. This system replaces a lot of hardwired relays and minimizes the necessaries vehicle wiring thus increasing the reliability of the train. In this paper, we proposed a software design technique of TCMS using CASE tool (SAO+). The TCMS functions are implemented in software easily programmed, using a functional block, graphic programming language. We applied the compressor air module to a case study.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.337-339
• /
• 2005

A photovoltaic panel is a device that, through the photovoltaic effect, converts luminous energy into electric energy. Photovoltaic generation system uses infinity of sofa energy, cost of fuel is needless and there is no air pollution or waste occurrence. This paper summarizes the results of these efforts by offering a photovoltaic system structure in 50kW large scale applications installed in Chosun University dormitory roof and simulation tool. This describes configuration of utility interactive photovoltaic system which generated power supply for dormitory. In this Paper represent 50kW utility PV system examination result.