• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.1
• /
• pp.115-124
• /
• 2002

The optimum design of auto-catalyst needs a good compromise between the pressure drop and flow distribution in the monolith. One of the effective methods to achieve this goal is to use the concept of radially variable cell density. However, there has been no study of evaluating the usefulness of this method on light-off catalyst. We have computationally investigated the effectiveness of variable cell density technique applied to the light-off catalyst using a three-dimensional integrated CFD model. in which transient chemical reacting calculations are involved. Computed results show that variable cell density technique can reduce the accumulated emissions of CO and HC during the early 100sec of FTP cycle by 86.78 and 80.87%, respectively, The effect of air-gap between the monoliths has been also examined. It is found that air-gap has a beneficial effect on reducing pressure drop and cold-start emissions.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.1
• /
• pp.52-57
• /
• 2008

In the transformer that is used for the contactless power transmission system, the primary and secondary sides are separated structurally unlike general transformers. When the contactless transformer is built, it forms relatively bigger air gap than the general transformer. Thus it is difficult to transfer energy from the primary side input to the secondary side output with high power efficiently because of low coupling coefficient. This paper proposes a contactless transformer using the rectangular type core that maintains high coupling coefficient even when it has relatively large air gap. The performance characteristics of the proposed transformer are compared with the transformer using general EE core to the air gap variation. The proposed contactless system using rectangular type core and dc-dc full bridge converter, and the system using EE core type and dc-dc full bridge converter are respectively implemented and their performance characteristics are verified by the simulation and experiment.

• Membrane and Water Treatment
• /
• v.5 no.1
• /
• pp.57-71
• /
• 2014

In this study, a theoretical model for the transport phenomena in an Air Gap Membrane Distillation used for desalination was developed. The model is based on the conservation equations for the mass, momentum, energy and species within the feed water solution as well as on the mass and energy balances on the membrane sides. The rarefaction impacts are taken into consideration showing their effects on process parameters particularly permeate flow and thermal efficiency. The theoretical model was validated with available data and was found in good agreement especially when the slip condition is introduced. The rarefaction impact was found considerable inducing an increase in the permeate flux and the thermal efficiency.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.379-384
• /
• 2007

In this paper, a new method for detecting rotor vibrations in a squirrel-cage induction motor is proposed. The air-gap flux variation analysis was done using search coils inserted in stator slots when rotor vibration conditions occurs. An accurate modelling and analysis of air-gap flux variation in the induction motor are developed using finite-element (FE) software packages, and treasuring the flux are made using search coils. In the FE analysis and experiment, the three-phase squirrel-gage induction motor with 380 [V], 7.5 [kW], 4 Poles, 1,768 [rpm] ratings is used. The simulation and experiment results can be useful for detecting rotor vibration of the induction motors.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.5
• /
• pp.195-201
• /
• 2016

Enhanced tubes are widely used in air-conditioning and process industries. Structural tubes having three-dimensional roughness are well known to be able to significantly enhance pool boiling heat transfer of refrigerants. In this study, five structural enhanced tubes having different fin density, fin height, and fin gap width were tested using R-134a. Results showed that the heat transfer coefficient was increased with increased fin density. Within test range, the effect of fin height on pool boiling heat transfer coefficient was insignificant. The heat transfer coefficients of the optimum configuration (2047 fpm, 0.21 mm gap width) tube were lower than those of other commercial enhanced tubes. This might be due to the larger fin gap width of the present enhanced tube.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.838-841
• /
• 2003

The aim of the study is to scrutinize the relationship between the area of resonance and insertion loss by analyzing the characteristics of 2-port resonator. This was done through designing an air-gap type Film Bulk Acoustic Resonator (FBAR) by using CAD model for the application of bandpass filter of high-frequency band with piezoelectric thin film. Moreover, through the design of ladder-type BPF, we were able to observe changes in bandwidth, resonation, out-of-band rejection depending on the number and area of resonator.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.9
• /
• pp.84-91
• /
• 2003

This paper concerns on one-DOF non-rotating active magnetic bearing (AMB) system subject to base motion. In such a system, it is desirable to retain the axis within the predetermined air-gap while the base motion forces the axis to deviate from the desired air-gap. Motivated from this, an optimal acceleration feedforward control is proposed to reduce the base motion response without deteriorating other feedback control performances. Experimental results demonstrate that the proposed optimal feedforward control reduces the standard deviation of the air-gap to 29％ that by feedback control alone.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.17-20
• /
• 2001

In this paper, film bulk acoustic resonator(FBAR) with an air-gap is fabricated by removing ZnO sacrificial layer and its characteristics as a various dimension of ZnO sacrificial and piezoelectric layer is evaluated. The center frequency of the FBAR device with the ZnO film is about 1.9 GHz. Because of mass-loading effect, a dimension of sacrificial layer and piezoelectrc layer affect frequency response such as center frequency, insertion loss, band separation, attenuation and so on.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.291-295
• /
• 2007

The irregularities in the guideways used in the Maglev transportation system that result from surface roughness and deflection of guideway have strong effects on the dynamic characteristics of Maglev vehicles, because the electromagnetic suspension of Maglev vehicles strongly interacts with the guideway. For this reason, a numerical prediction of air gap responses to these irregularities is desirable to improve aspects of running performance, such as stability and passenger comfort, while minimizing aesthetic impact and construction cost. This paper presents a procedure to predict the air gap response which is a criteria for stability, and investigates the responses with the goal of attaining higher travel speeds in the urban Maglev vehicle UTM-01 utilizing electromagnetic suspension.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.828-831
• /
• 2003

This paper presents a novel design technique and characteristic analysis of Magnet for dual air-gap axial-flux type permanent-magnet synchronous generator. The process of magnet design is applied to the motor design and steady state analysis considering output voltage waveforms and magnetic flux waveforms. Design and construction of an axial-flux permanent-magnet generator with power output at 60 [Hz], 300[r/min] is introduced. Finite-element (FE) method is applied to analyze magnet shape characteristics. The results of FE analysis show generator is feasible for use with dual air-gap axial-flux permanent- magnet synchronous generator.