• 한국컴퓨터정보학회논문지
• /
• 제17권11호
• /
• pp.33-38
• /
• 2012

미도는 문 스펜서가 제시한 이론으로 아름다움의 정도를 수치로 표현하려 한 것이다. 그리고 미국의 학자 버크호프가 문 스펜서의 미는 복잡성 속의 질서성을 가진 것이라는 명제를 분석하였다. 그는 미도의 공식을 발표하여 미도의 정도를 수량적으로 취급하였다. 따라서 기존의 색채 조화론의 부족한 점을 제거하여 보다 과학적이고 정량적인 조화이론을 전개했다. 본 논문에서는 배색의 좋고 나쁨은 질서의 요소와 복잡함의 요소로 나누었다. 미도는 질서의 요소를 복잡함의 요소로 나눈 것이다. 이를 영상의 미도 계산에 활용하여, 감성으로 취급되는 색채조화 및 부조화의 문제를 수치적으로 계산하였다. 그리하여 영상에서 색을 판별하여 미도가 좋은 배색인지 아닌지를 나타내었다.

• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1304-1317
• /
• 2020

The tubes in a heat exchanger, such as a steam generator (SG), are subjected to crossflow, and interaction between tubes and supports can happen, which can cause fretting wear of tubes. Although many experiments and models have been established, some detailed mechanisms are still not sufficiently clear. In this work, more attention is paid to obtain the regulation of impact and sliding in the complex process and many factors, such as excitation forces and clearances. The responses and contact forces were analyzed to obtain clear understanding of the influences of these factors. Room temperature tests in the air were established. The results show that the effect of clearance on the normal work rate is not monotonous and instead has two peaks. The force ratio can influence the normal work rate by changing the distribution of contact angles, which can result in higher sliding in the contact process. Fretting wear tests are conducted, and the wear surfaces are analyzed by a scanning electron microscope (SEM) and energy dispersive X-ray spectrometer (EDX). The results of this work can serve as a reference for impactsliding contact analysis between AVBs and tubes in steam generators.

• 환경정책연구
• /
• 제3권2호
• /
• pp.59-87
• /
• 2004

In its Declaration of Principles, the United Nations Conference on Environment and Development recommends that, "to achieve sustainable development and a higher quality of life for all people, states should reduce and eliminate unsustainable patterns of production and consumption...." This notion of sustainability lies at the core of many "commons" problems, where the central issue is to enable "individuals to sustain long-term, productive use of natural resource systems". In other worlds, a common definition of "sustainability" captures the idea of aligning human consumption with the capacity of ecological systems to supply, over a long period of time, such natural resources as air, soil, or water on which production depends. The concept of sustainability raises all sorts of political, social, and economic questions about the distribution of environmental protection. For sustainable community development to be addressed, these questions must be raised. In order to convince different citizenry of the necessity of sustainability, these questions must also be answered. This is where questions of equity, justice, and fairness arise. Sustainability and equity require that we deal with nature as an undivided whole, with no part being unsustainable. Sustainability and social policy also requires that we deal with the human population as an undivided whole. We simply cannot move people around the planet to either perpetuate past practices of earth exploitation or to implement sustainable planning. Everyone must work with the people inhabiting sensitive ecological areas, especially areas of regeneration. In the sustainable global community, we are as strong as our weakest link, or our most toxic community. This is the undeniable driving force for the infusion of equity into the sustainable development debate.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.938-941
• /
• 2003

It is well known that the state of existence of molecules on the surface of water changes during compression of the molecules. Electric methods, such as measurement of the surface potential or displacement current are also useful for investigating dynamic changes of molecular state on the water surface during compression and Transformation of molecular film occurs only usually in air-water interface, 2 dimensions domain's growth and crash are achieved. Organic thin film that consist of growth of domain can understand correct special quality of accumulation film supplying information about fine structure and properties of matter of device observing information and so on that is surface forward player and optic enemy using AFM one of SPM application by nano electronics. In this paper Langmuir (L) that is one of basis technology to manufacture of organic matter device using biology material PBDG that is kind of polypeptide that have biology adaptedness. The Experiment method used ${\pi}-A$ isotherm and BAM(Brewster Angle Microscopy), using the BAM, we can to the molecular orientation of monolayer on the water surface and directly see the morphology of the films on water subphase as well as that of the films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.386-386
• /
• 2010

최근의 전자재료들은 산화물 기반의 소자들을 이용하며 이들 소자의 특징은 가시광 영역에서의 높은 투과도와 실리콘 기반의 소자에 비해서 높은 이동도를 나타낸다. 이러한 점을 활용하여 LCD, PDP, 태양전지 등으로의 응용을 위해 활발히 연구되고 있다. 본 연구에서는 비정질임에도 이동도가 $10cm^2/V{\cdot}s$ 정도로 높은 이동도를 가지고 있는 a-IGZO 박막에 대하여 RF magnetron sputtering 법을 이용, 다각도의 연구를 진행하였다. 기판은 Corning 1737 유리기판을 사용하였으며 유기 클리닝 후 즉시 챔버 내부에 장착되었다. IGZO 타겟은 $In_2O_3$, $Ga_2O_3$, ZnO 분말을 각각 1:1:2mol% 조성비로 혼합하여 소결한 타겟을 사용하였으며 AFM, SEM, XRD 투과도를 이용하여 산소의 함량과 RF power에 따른 박막의 변화를 알아보았다. 박막 증착 조건으로는 초기 압력을 $2.0{\times}10^{-6}$ Torr, 증착압력으로 $2.0{\times}10^{-2}$ Torr를 유지하였으며, Ar 과 $O_2$의 비율을 10에서 40%까지 변화시키며 시편을 제작하였다. AFM 분석결과 $O_2$가 첨가될수록 박막의 거칠기가 감소하였으며, XRD 결과 Bragg's 법칙을 만족 하지 않는 비정질 구조임을 확인할 수 있었다. 가시광선 투과 특성은 $O_2$를 첨가한 박막이 첨가하지 않은 박막보다 우수하였으며 그 평균은 85% 이상으로 양호하였다. Hall과 XPS 분석결과 산소함량이 많아질수록 박막의 특성이 절연체의 특성을 가짐을 확인하였다.

• 전자공학회논문지
• /
• 제51권6호
• /
• pp.169-174
• /
• 2014

센서노드를 활용한 응용이 증가함에 따라 센서네트워크의 장기적 운용과 성능을 보장할 수 있는 현실적 배치 문제 해결 기법이 요구되고 있다. 특히 네트워크 연결성은 네트워크 전체 수명에도 영향을 줄 뿐만 아니라 근거리 센싱 정보의 취합 능력에도 직접적인 연관성을 갖는다. 센서네트워크의 구축 시 요구되는 경제적인 이유와 함께 센서 노드가 배치될 필드의 접근성 문제로 임의 배치 기법이 주로 사용되고 있으나 센서노드의 불균일로 인한 연결성 문제, 비효율적 네트워크 구성 등이 발생할 수 있다. 본 논문에서는 초기 배치 노드의 성능을 최대한 활용할 수 있도록 거점 노드의 혼합 배치 기법을 제안한다. 혼합 배치를 통해 기존 센서 노드의 불균형을 완화시키면서 추가되는 혼합 노드의 수를 효과적으로 줄일 수 있는 밀도 분석을 시행하였다. 실험 결과를 통하여 제안하는 기법이 단일 센서노드로 구성된 기존의 배치 방식 보다 좋은 결과를 얻을 수 있음을 보였다.

• 마이크로전자및패키징학회지
• /
• 제20권4호
• /
• pp.7-11
• /
• 2013

As thermosonic ball bonding is developed for more and more advanced applications in the electronic packaging industry, the control of process stresses induced on the integrated circuits becomes more important. If Cu bonding wire is used instead of Au wire, larger ultrasonic levels are common during bonding. For advanced microchips the use of Cu based wire is risky because the ultrasonic stresses can cause chip damage. This risk needs to be managed by e.g. the use of ultrasound during the impact stage of the ball on the pad ("pre-bleed") as it can reduce the strain hardening effect, which leads to a softer deformed ball that can be bonded with less ultrasound. To find the best profiles of ultrasound during impact, a numerical model is reported for ultrasonic bonding with capillary dynamics combined with a geometrical model describing ball deformation based on volume conservation and stress balance. This leads to an efficient procedure of ball bond modelling bypassing plasticity and contact pairs. The ultrasonic force and average stress at the bond zone are extracted from the numerical experiments for a $50{\mu}m$ diameter free air ball deformed by a capillary with a hole diameter of $35{\mu}m$ at the tip, a chamfer diameter of $51{\mu}m$, a chamfer angle of $90^{\circ}$, and a face angle of $1^{\circ}$. An upper limit of the ultrasonic amplitude during impact is derived below which the ultrasonic shear stress at the interface is not higher than 120 MPa, which can be recommended for low stress bonding.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.217-220
• /
• 2006

The lift and drag forces produced by a wing of a given cross-sectional profile are dependent on the wing planform and the angle of attack. Aspect ratio is the ratio of the wing span to the average chord. For conventional fixed wing aircrafts, high aspect ratio wings produce a higher lift to drag ratio than low ones for flight at subsonic speeds. Therefore, high aspect ratio wings are used on aircraft intended for long endurance. However, birds and insects flap their wings to fly in the air and they can change their wing motions. Their wing motions are made up of translation and rotation. Therefore, we tested flapping motions with parameters which affect rotational motion such as the angle of attack and the wing beat frequency. The half elliptic shaped wings were designed with the variation of aspect ratio from 4 to 11. The flapping device was operated in the water to reduce the wing beat frequency according to Reynolds similarity. In this study, the aerodynamic forces, the time-averaged force coefficients and the lift to drag ratio were measured at Reynolds number 15,000 to explore the aerodynamic characteristics with the variation of aspect ratio. The maximum lift coefficient was turned up at AR=8. The mean drag coefficients were almost same values at angle of attack from $10^{\circ}$ to $40^{\circ}$ regardless of aspect ratio, and the mean drag coefficients above angle of attack $50^{\circ}$ were decreased according to the increase of aspect ratio. For flapping motion the maximum mean lift to drag ratio appeared at AR=8.

• 대한전자공학회논문지
• /
• 제18권5호
• /
• pp.35-45
• /
• 1981

직각 쐐기는 유전체에 평면 전자파가 입사할때 일어나는 산란파에 대한 점근해를 구하였다. 산란파는 유전체경계면으로부터 반사된 파 및 고절된 파와 유전체 끝 모서리로부터 회석된 도간면파로 구성하였다. 모서리에서 회절된 전제는 물리광학 근사법에 의한 해에 교정항을 더하여 구하였으며, 이 교정 전계는 수치 계산에 의하여 풀 수 있는 이중 급수 방정식으로부터 구하였다. 구해진 점근해의 유효성은 유전체의 상대 유전률 ε의 값이 -에 갈때와 1에 가까운 값을 가질때의 두 극한치에서 검토 되었다. ε이 작을때는 Rawlins이 구한 ε Neumann계수해의 계산 결과와 같았으며, ε이 ∞에 접근할때 모서리의 회절 패턴은 도체 모서리의 회절패턴에 접근함을 보일 수 있다.

• 대한인간공학회지
• /
• 제34권5호
• /
• pp.455-467
• /
• 2015

Objective: The present study suggested practical measures for successful patent registration based on a review of success and failure cases of patent application filed based on inventions obtained from physical ergonomics research. Background: The protection of intellectual property (IP) contributes to economic growth and competitiveness and facilitates innovation and creativity. IP rights are pursued on research findings for effective technology transfer and commercialization; however, a patent application can be rejected if patentability requirements such as patent eligible subject matter, utility for industrial application, novelty, or non-obviousness are not satisfied. Method: Three successful and three failed cases of patent applications based on physical ergonomics research were reviewed, critical reasons for their successes and failures were examined, and measures were proposed to avoid failures in patent registration. Results: The following measures were identified based on the patent application case review. First, abstract ideas including logical procedures and/or mathematical formulas need to include use of tangible apparatus and methods in idea realization. Second, the provision of grace period inventor disclosure exception needs to be properly followed in case an invention is disclosed before filing of patent application. Lastly, a comprehensive analysis of prior art published or publicly known anywhere in the world and a claim preparation of distinguished, non-trivial features compared to prior art solutions are needed to avoid possible violation of novelty and non-obviousness. Application: The proposed measures can help to prepare a patent application with patent eligibility.