• Journal of Oral Medicine and Pain
• /
• v.11 no.1
• /
• pp.45-56
• /
• 1986

The author investigated the Pantronic PRI scores for detection of TMJ dysfunction using the Pantronic in 20 subjects who were male students of the school of dentistry, Seoul National University selected according to sampling criteria and came to the following conclusions. 1. According to the HDI, 20 subjects were divided into 2 groups, the DiO and the DiI, it was appeared that 45% of the subjects had some degree of TMJ dysfunction in each session. 2. According to the P-PRI, 20 subjects were categorized into 3 categories, the none, the slight and the moderate, it was appeared that 82% of the subjects had some degree of TMJ dysfunction in each session. 3. The ability of the P-PRI was more sensitive than that of the HDI in detection of TMJ dysfunction (p < 0.01). 4. The P-PRI scores were consistent within each session and among sessions. 5. The results suggested that the P-PRI, a measure of reproducibility of border tracings, could be an aid to detect TMJ dysfunction and could be used to assess the severity of TMJ dysfunction.

• Journal of Oral Medicine and Pain
• /
• v.16 no.1
• /
• pp.121-136
• /
• 1991

This study was undertaken to obtain the data for age determination following the calcification degree of the second molar, third molar in the point of forensic odontology. The intraoral panoramic radiograph of 1600 male and 1600 female (100 persons each age) ranging from 7 to 2 years of age were studied. The developmental state of the second molar and third molar were divided into 12 stages following the calcification degree and correlations of second molar developmental stage and statistically analyzed. The results were as follows : 1. There was remarkable correlation between the development of the second molar, the third molar and age. 2. There was no significant developmental differences between the right and left second molar, third molar.(p>0.05) 3. The developmental stages of the lower second molar was more advanced than those of upper second molar. (p<0.05) 4. The developmental stages of upper third molar was more advanced than those of lower third molar. (p<0.05) 5. Both the developmental stages of second, third molars were earlier in the female than in the male. (p<0.001) 6. For the purpose of age estimation according to developmental stages of the second, third molar, linear equations are as follows. (p<0.001) second molar : male upper : Y=1.3927X + 0.2213 (r=0.72) lower : Y=1.4132X + 0.0012 (r=0.78) female upper : Y=1.4914X + 0.2151 (r=0.73) lower : Y=1.5429X - 0.0911 (r=0.78)

• Physical Therapy Korea
• /
• v.10 no.2
• /
• pp.71-84
• /
• 2003

The purpose of this study was to provide information on driving characteristics in persons with spinal cord injury through basic statistic analysis of the survey results. The survey was administered to 44 drivers with spinal cord injury. The subjects' general, neurologic and driving characteristics were analyzed, as well as the degree of difficulty in using their vehicles between tetraplegia and paraplegia. The results were as follows: thirty-five (79.6%) of forty-four respondents was men. The average age was 35.0 years old and the age at the time of injury was 29.0 years old. Their neurologic characteristics were tetraplegics 12 (27.3%) and paraplegics 32 (72.2%). Among complete lesions, the highest level those who could drive independently was C7. All the vehicles were equipped with special devices, including "power steering", "automatic transmission" and "hand controls". The vehicles for cervical cord injury were equipped with "grip bars" as well as for the degree of difficulty in using their vehicles, all the subjects felt that "moving the wheelchair in and out of their vehicles" was too difficult for them to do. We suggest that the driver training should be an essential part of the rehabilitation program for patients with spinal cord injuries to maximize their mobility in the community. This training seems to be essential in order to modify the standards of the Handicapped Drivers Ability Test and to aid the driver rehabilitation program in the health insurance payment system. Also, the driver rehabilitation training program should include instruction in that moving wheelchairs in and out of vehicles.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.3
• /
• pp.631-639
• /
• 1996

Electrosurgical technique have been used in dentistry as an aid to soft tissue management for nearly 60 years. However, it was not until the late 1960s that the principles of electrosurgery were understood and improved equipment became available. Electrosurgery is a surgical procedure performed on soft tissue utilizing controlled high frequency electricaI(radio-frequency) currents in the range of 1,500,000 to 7,500,000 cyclesper second. The radio-frequency energy used in electrosurgery is able to cut and coagulate tissue because it focuses the energy at the small, active electrode. Advantages of electrosurgery for soft-tissue management during dental procedures include improved hemostasis, ease of tissue modification, improved visibility and so on, but adverse healing responses-including necrosis of soft tissue and sequestration of alveolar bone-have been reported. The present report provides examples of treatment of soft tissue and pulp tissue of primary teeth by electrosurgery. The results are as follows; 1. Electrosurgical techniques can be used for various procedures in pedodontics. 2. Electrosurgical procedures provide improved hemostasis and visibility in the operating field, which enable to remove, reshape, and contour soft tissues easily. 3. In pulpotomy technique, it was difficult to expect the variable pulpal response based on the degree of heat accumulation and the conditions of pulp tissues. Therefore, electrosurgical pulpotomy could not be considered as a method superior to formocresol pulpotomy. 4. A greater degree of dexterity and experiences in manipulation of the electrode is required compared with the conventional scalpel surgery.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2009.04a
• /
• pp.23-28
• /
• 2009

The purpose of this study was to improve not only wet-end performances but also paper characteristics by the modification of various factors like molecular design and ionic characteristics of polyacrylamides First of all physical characteristics were observed after modify molecular design of the cationic polyacrylamides to linear, branched and cross-linked. In addition it was found analysis method to confirm branch degree of cationic polyacrylamides to combine ionic titration characteristics and spectroscopic behavior, After application of these structure modified polyacrylamides to the multiple retention systems with inorganic microparticles, it was found adjusting of branch degree of polyacrylamides was very important to optimize wet-end improvement. Second, After polymerization of amphoteric polyacrylamide to have both of cationic and anionic functional group in the polymer, we observed not only physical characteristics but also wet-end improvement to apply recycled pulp and found that the improvement of solution stability to prevent hydrolysis and increase of ash retention dramatically to compare traditional cationic polyacrylamide retention aid, Finally, After polymerization of anionic polyacrylamide, we observed not only wet-end improvement but also paper characteristics to apply preflocculation of PCC and it was found the improvements of flocculation efficiency, retention, ash retention, optical properties of the paper and bursting strength to compare traditional preflocculant of cationic polyacrylamide.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.507-512
• /
• 2001

The government set up a comprehensive plan for EC vitalizations in February 2000 and has begun implementing it. They hope to introduce EC into the economy at large and invoke reconsideration of its efficiency and transparency in the public sector. To accomplish this, the government has built EC utilization system within the industry and trade. However, the overall EC in the construction industry is below expectation. With the aid of the government, larger construction companies are building E-marketplace by increasing the investment in IT and organizing a consortium. On the other hand, small and medium construction companies have difficulties in investing in EC. On the basis of a field research, this study investigates problems that small and medium construction industry confronts in a domestic environment and EC system. It also analyzes the limitations of the tax reduction law for EC. Therefore, this study suggests a counterplan that defines the importance of a government guided plan and necessity of providing incentives to encourage EC Utilization degree.

• Structural Engineering and Mechanics
• /
• v.77 no.4
• /
• pp.441-461
• /
• 2021

Reinforced concrete (RC) columns are crucial in building structures and they are of higher vulnerability to terrorist threat than any other structural elements. Thus it is of great interest and necessity to achieve a comprehensive understanding of the possible responses of RC columns when exposed to high intensive blast loads. The primary objective of this study is to derive analytical formulas to assess vulnerability of RC columns using an advanced numerical modelling approach. This investigation is necessary as the effect of blast loads would be minimal to the RC structure if the explosive charge is located at the safe standoff distance from the main columns in the building and therefore minimizes the chance of disastrous collapse of the RC columns. In the current research, finite element model is developed for RC columns using LS-DYNA program that includes a comprehensive discussion of the material models, element formulation, boundary condition and loading methods. Numerical model is validated to aid in the study of RC column testing against the explosion field test results. Residual capacity of RC column is selected as damage criteria. Intensive investigations using Arbitrary Lagrangian Eulerian (ALE) methodology are then implemented to evaluate the influence of scaled distance, column dimension, concrete and steel reinforcement properties and axial load index on the vulnerability of RC columns. The generated empirical formulae can be used by the designers to predict a damage degree of new column design when consider explosive loads. With an extensive knowledge on the vulnerability assessment of RC structures under blast explosion, advancement to the convention design of structural elements can be achieved to improve the column survivability, while reducing the lethality of explosive attack and in turn providing a safer environment for the public.

• Steel and Composite Structures
• /
• v.48 no.6
• /
• pp.693-708
• /
• 2023

Composite beams, two materials joined together, have become more common in structural engineering over the past few decades because they have better mechanical and structural properties. The shear connectors between their layers exhibit some deformability with finite stiffness, resulting in interfacial shear slip, a phenomenon known as partial shear interaction. Such a partial shear interaction contributes significantly to the composite beams. To provide precise predictions of the geometric nonlinear behavior shown by two-layered composite beams with interfacial shear slips, a robust analytical model has been developed that incorporates the influence of significant displacements. The application of a higher-order beam theory to the two material layers results in a third-order adjustment of the longitudinal displacement within each layer along the depth of the beam. Deformable shear connectors are employed at the interface to represent the partial shear interaction by means of a sequence of shear connectors that are evenly distributed throughout the beam's length. The Von-Karman theory of large deflection incorporates geometric nonlinearity into the governing equations, which are then solved analytically using the Navier solution technique. Suggested model exhibits a notable level of agreement with published findings, and numerical outputs derived from finite element (FE) model. Large displacement substantially reduces deflection, interfacial shear slip, and stress values. Geometric nonlinearity has a significant impact on beams with larger span-to-depth ratio and a greater degree of shear connector deformability. Potentially, the analytical model can accurately predict the geometric nonlinear responses of composite beams. The model has a high degree of generality, which might aid in the numerical solution of composite beams with varying configurations and shear criteria.

• Clinical Pain
• /
• v.18 no.2
• /
• pp.76-81
• /
• 2019

Objective: To examine (1) the degree of reduction of passive range of motion (PROM) on the affected side compared to that on the unaffected side and (2) the degree of increase in PROM following intra-articular corticosteroid injection (IACI) in patients with frozen shoulder. Method: The medical records of 120 patients with frozen shoulder were retrospectively reviewed. PROM of the unaffected and affected shoulder (flexion, extension, abduction, internal rotation, external rotation) was compared, and changes in PROM of the affected shoulder after a single IACI (triamcinolone 20 mg) were evaluated after 12 weeks. Results: At the time of diagnosis, PROM of the affected shoulder was most limited in external rotation, followed by internal rotation, abduction, extension, and flexion, compared to that of the unaffected shoulder. Compared to before IACI, PROM of external rotation demonstrated the greatest increase compared to all the other movements after IACI. Conclusion: Limitation in PROM of the frozen shoulder at the time of diagnosis was greatest for external rotation. Moreover, external rotation experienced the greatest improvement after IACI. Our findings should help to further clarify the clinical characteristics of frozen shoulder, aid in its diagnosis, and allow the prediction of the effects of IACI.

• The Korean Journal of Emergency Medical Services
• /
• v.7 no.1
• /
• pp.213-234
• /
• 2003

The purposes of this study which was done by questionnaire survey and case study of First Aid Certification Program in Seoul Health College were to analyze results and effects of the college financial support program from Ministry of Education & Human Resources Development. The significant 164 data were collected from 300 professors in 8 colleges having the Department of Emergency Care from Oct. 1, 2002 to Dec. 31, 2002 and analyzed using SPSS in terms of t-test, ANOVA, Pearson's correlation coefficient and so on. The conclusions and suggestions from this study were summarized as follows; (1) Degree of acknowledgement about aims, contents, results of the college financial support program was above the middle(participants 4.21, non-participants 3.63) and higher relation than the others in case of participants(r:0.32 p<0.001), planning team(r:0.22 p<0.05). (2) Degree of acknowledgement about improvement of curriculum & educational facilities through the program was above the middle and higher relation than the others in case of participants. (3) Degree of acknowledgement about positive influence on acquirement rate of certification(licence) & job through the program was above the middle and performance & adaptation at work place was higher relation than the others in case of participants. (4) Degree of acknowledgement about positive influence on improvement of learning of student's major through the program was above the middle and higher relation than the others in case of participants. (5) The respondents thought that the program had a negative influence on professor's educational activities & research such as study 40.4%, lecture 23.1%, student guidance 12.5%. (6) When the program was administered by planning team, there were difficulties such as execution of budget 42.1%, cooperation with companies 17.1%, cooperation among program teams 11.8%, when it was administered by non-planning team there were difficulties such as execution of budget 45.5%, cooperation among departments 22.7%, cooperation with companies 13.6%. (7) Because it was too short to execute the budget, the ministry have to select proposed programs before the next school year. (8) This program should be changed temporary, insufficient support into consecutive, sufficient support for more characterization & specialization of the college which has a long-term developmental plan & vision.