• Journal of Biosystems Engineering
• /
• 제27권5호
• /
• pp.417-424
• /
• 2002

This study was conducted to develop a vehicle, leading or following a worker at a certain distance to assist laborious transporting works in greenhouses. A prototype vehicle was tested in the practical field conditions using a developed control algorithm. Results of this study were summarized as following: 1. The sensing device consisted of infrared sensors was attached to the front of the vehicle and turning following algorithm was developed to make the vehicle turned as it follows a worker simultaneously. 2. The measured average power consumptions were 110W and 89W, equivalent to 5.2-6.4 hrs battery durations, at low speed with and without the maximum payload, respectively. 3. Results of the travel tests showed that the deviations from the center of row spacing were $\pm$100 mm along the ridge and $\pm$85 mm along the hydroponic bed in the greenhouse. Therefore, the worker-following transport vehicle was feasible to travel along the row without collision in the greenhouse.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.1055-1062
• /
• 1996

A method for automatically driving paddy vehicles, such as rice transplanters, etc., straight ahead in a paddy field was investigated . The direction of such vehicles must be precisely controlled to do the operations as straight. However, the alignment of the from wheels becomes distorted due to the unevenness of the ground, preventing the vehicle form going straight. If the proper alignment of the front wheels is maintained , the vehicle can be driven straight ahead greater precision. To investigate the influence of the ground uneveness, the behavior of a paddy vehicle running over an obstacle was quantified. The left wheel ran over an obstacle on a flat concrete road surfaced. When the steering wheel was free, the front wheels were forced toward the left when vehicle went up the obstacle and toward the right when the vehicle went down it. The torsion of the wheel when the vehicle went down the obstacle was larger than that when it went up ,so it turned right 5 degrees. Sinc hydraulic control steering decreased the steering angle , it turned right 3 degrees. These results suggest that a vehicle can be driven straight ahead with high precision when the steering angle is changed in response to the direction and inclination of the vehicle . Such results were obtained in a paddy field tests.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1147-1156
• /
• 1993

In order to analyze lateral control in the backward maneuver of a tractor -trailer combination , a kinematic vehicle model and a human operator model with time delay were utilized for the operator/vehicle system. The analysis was carried out using the frequency domain approach. The open-loop stability of the vehicle motion was analyzed through the transfer functions. The sensitivity of the stability of the vehicle motion. to a change in the steering angle, was also analyzed. A mathematical model of the closed -loop operator/vehicle system was then formulated. The closed -loop stability of the operator /vehicle system was then analyzed. The effect of the delay time on the system was also analyzed through computer simulation.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1137-1146
• /
• 1993

In order to analyze lateral control in the forward manuever of a tractor- trailer combination , a human operator model and a kinematic vehicle model were utilized for the operator/vehicle system. By combining the vehicle and operator models, a mathematical model of the closed-loop operator/vehicle system was formulated. A computer program was developed so as to simulate the motion of the tractor-trailer combination . In order to verify the operator/vehicle system model, the results of the field trials were compared with the simulated results. There was found to be reasonably good agreement between the two.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.810-819
• /
• 1993

An autonomous lan vehicle for agriculture(ALVA-II) was developed. A prototype vehicle was made by modifying a commercial tractor. A Navigation sensor system with a geo-magnetic sensor performed the autonomous operations of ALVA-II, such as rotary tilling with headland turnings. A navigation sensor system with a machine vision system was also investigated to control ALVA-II following a work boudnary.

• Coupled systems mechanics
• /
• 제12권1호
• /
• pp.1-20
• /
• 2023

On the basis of the explicit time-domain method, an investigation is performed on the influence of the rotational stiffness and rotational damping of the vehicle body and front-rear bogies on the dynamic responses of the vehicle-bridge coupled systems. The equation of motion for the vehicle subsystem is derived employing rigid dynamical theories without considering the rotational stiffness and rotational damping of the vehicle body, as well as the front-rear bogies. The explicit expressions for the dynamic responses of the vehicle and bridge subsystems to contact forces are generated utilizing the explicit time-domain method. Due to the compact wheel-rail model, which reflects the compatibility requirement of the two subsystems, the explicit expression of the evolutionary statistical moment for the contact forces may be performed with relative ease. Then, the evolutionary statistical moments for the respective responses of the two subsystems can be determined. The numerical results indicate that the simplification of vehicle model has little effect on the responses of the bridge subsystem and the vehicle body, except for the responses of the rotational degrees of freedom for the vehicle subsystem, regardless of whether deterministic or random analyses are performed.

• Journal of Biosystems Engineering
• /
• 제27권5호
• /
• pp.409-416
• /
• 2002

This study was conducted to develop a vehicle, leading or following a worker at a certain distance to assist laborious transporting works in greenhouses. A prototype vehicle, which consisted of the rear driving, the front steering and the console units, was designed and tested in the ideal indoor conditions. Results of this study were summarized as following: 1. The driving unit was designed to travel at the speed ranges of 0.3∼0.8 m/sec depending on the operating modes with a maximum payload of 100 kg. 2. The console unit consisted of a main-board including a 80C196KC microprocessor and peripheral devices, a power-board and safety interlock. Worker-leading, and following modes were available in automatic and manual modes. 3. Steering was achieved by turning the steering motor against the sensed direction. Proper steering angles for correcting travel direction were determined as 5 and 9 degrees when sensing cultivation beds and plants, respectively.

• Journal of Biosystems Engineering
• /
• 제34권6호
• /
• pp.391-396
• /
• 2009

The percentage of those aged 60 and over is 43.5% among our country's 3,186 thousands farming population, so farm village is getting aging society rapidly. Moreover agricultural competitiveness has being weakened due to labor shortage by degradation in quality of labor configuration from elderly porson. For realisms easy workability, we developed a motor vehicle for agricultural activity. The vehicle has an automatic guidance system which could follows a track of magnetic tape on the floor for easy moving to given working position. We collected data from two guidance sensors, located on front and rear end of the vehicle and calculated displacement and angle deviation from the track. This traveling system was stably controlled with processing information deflection S, angle of deviation, D and angle velocity, Vt = $k_1D$ - $k_2S$ from two guidance sensors attached on front and rear of th motor vehicle. Also this system have been tested under various condition of $k_1$, $k_2$ for comparison on both stepped and turning routes. The results show that traveling performance is best at $k_1$=0.7, $k_2$=3.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.94.4-94
• /
• 2001

An acoustic ranging system was applied for reckoning the location of an agricultural vehicle in the field. The system has a number of fixed stations and a mobile station such as an agricultural vehicle. The mobile station comprises a radio frequency modulator-demodulator (RF MODEM), a buzzer, and a personal computer. The fixed station comprises an (RF MODEM), a microphone, an amplifier for the microphone, and a personal computer with a soundboard. The mobile station transmits a 7-bit ASCII code and, activates the buzzer simultaneously. The propagation delay time at the fixed station is caused by the difference ...

• 농업과학연구
• /
• 제42권3호
• /
• pp.269-276
• /
• 2015

Unmanned Aerial Vehicle (UAV) has several advantages over conventional remote sensing techniques. They can acquire high-resolution images quickly and repeatedly. And with a comparatively lower flight altitude, they can obtain good quality images even in cloudy weather. In this paper, we discussed the state-of-the-art of the domestic and international use of UAV in agricultural sector as well as assessed its utilization and applicability for agricultural environment in Korea. Association of robotic, computer vision and geomatic technologies have established a new paradigm of low-altitude aerial remote sensing that has now been receiving attention from researchers all over the world. In a field study, it has been found that use of UAV imagery in an agricultural subsidy program can reduce the farmers' complain and provide objective evidence. UAV high resolution photography can also be helpful in monitoring the disposal zone for animal carcasses. Due to its expeditiousness and accuracy, UAV imagery can be a very useful tool to evaluate the damage in case of an agricultural disaster for both parties insurance companies and the farmers. Also high spatial and temporal resolution in UAV system can increase the prediction accuracy which in turn help to maintain the agricultural supply and demand chain.