• Title/Summary/Keyword: Agricultural spray

Search Result 420, Processing Time 0.03 seconds

Design of Roll-over Protection Structure for an Orchard Sprayer (과수용 방제기 전도 방지 구조물의 설계)

  • Kang, Tae-Gyoung;Lee, Chai-Sik;Jun, Hyeon-Jong;Choi, Duck-Kyu;Park, Suk-Ho;Kim, Hyeok-Ju;Kang, Tae-Hwan
    • Journal of Biosystems Engineering
    • /
    • v.36 no.6
    • /
    • pp.407-415
    • /
    • 2011
  • Damage to agricultural production caused by insects and diseases affects farming yields. The orchard sprayer is mainly used in the country to protect the fruit in a large area, with less effort and at minimum cost. The excellent performance of the air blast spray increases the fruit protection. Chemical application in orchards has been accomplished by the orchard sprayers with air assist nozzles and a axial fan in Korea. However, the orchard sprayers without ROPS resulted in severe injury or death when operators drive the sprayers improperly on hilly orchard or farming road. This study was to develop a ROPS for the orchard sprayers improving farmer's safety. In this study, the accident case was used in analysing the design and building TOP structure of the orchard sprayer. The maximum impact, body torsion frame structures including the driver's protection are also analysed for adherence to safety regulations. The ROPS safety regulations according to the strength test results were established.

Analysis on Fertilizer Application Uniformity of Centrifugal Fertilizer Distributor

  • Kim, JiMan;Woo, Dukgam;Kim, Taehan
    • Journal of Biosystems Engineering
    • /
    • v.43 no.4
    • /
    • pp.420-425
    • /
    • 2018
  • Purpose: Chemical fertilizers contribute to agricultural productivity. Annually, 450,000 tons of chemical fertilizers are used in Korea, which is 268 kg per hectare (MAFRA, 2016). However, excessive use causes problems such as environmental pollution and soil acidification. This study proposes use conditions for a fertilizer distributor that can reduce excessive fertilization by analyzing distribution patterns. Methods: This study analyzed fertilizer application uniformity according to the number of blades on a centrifugal fertilizer distributor (three or four blades), orifice gate open ratio (50 or 100%), and blade rotation speed (400, 500, or 600 rpm). Results: When using four blades, the coefficient of variation (CV) was lower than when using three by 11-13% points, and the CV using the 50% open ratio was 10-30% points lower than using the 100% open ratio. The CV at 500 rpm blade rotating speed was 9-12% points lower than that for 400 and 600 rpm. Conclusions: The CV with four blades, 50% orifice gate open ratio, and 500 rpm of blade rotating speed was 18.4%, which provided the most uniform fertilization.

Effects of Wind Net Shading and Sprinkling on Growing Conditions and Fruit Quality in 'Hongro' and 'Fuji' Apple Fruits (방풍망 차광시설 및 미세살수 처리가 '홍로' 및 '후지' 사과나무의 생육환경 및 과실 품질에 미치는 영향)

  • Kang, Kyeong-Jin;Seo, Jeong-Hak;Yoon, Hong-Ki;Seo, Jeong-Seok;Choi, Taek-Yong;Chun, Jong-Pil
    • Journal of Bio-Environment Control
    • /
    • v.28 no.2
    • /
    • pp.126-133
    • /
    • 2019
  • In recent years, the deterioration of fruit quality caused by poor coloration and sunburn disorder has become serious problems in apple market, which is a result of the increase of surface temperature due to the abnormal temperature increase during summer season. This study was conducted to investigate the effect of wind net shading and fine water spray using sprinkler on fruit coloration, sunburn damage and overall fruit quality of 'Fuji' and 'Hongro' apples. Fifteen sprinklers (7L/hr) were installed at the orchard of the Chungcheongnam-do Agricultural Research and Extension Services, located in Sinam-myeon Chungcheongnam-do Korea, at a height of 3m above the apple tree of $1.5m{\times}3.5m$ north-south direction. Fine water spraying treatment was divided into day time spray (10:00 am to 6:00 pm) and all day spray (10:00 am to 10:00 pm) from early July to 10 days before harvest in 2017 and 2018 season, respectively. Temperature of the surface of apple fruit, characteristic of fruit, and degree of sunburn damage were investigated. In 'Fuji', the fruit surface temperature checked at 2 pm on August 10 was decreased considerably in the day time spray ($35.6^{\circ}C$) and wind net ($39.0^{\circ}C$) when compared with the untreated control ($44.4^{\circ}C$). Similarly, the fruit surface temperature also decreased considerably in the all day spray ($35.1^{\circ}C$) and wind net ($36.9^{\circ}C$) treatments when compared with the untreated control ($46.5^{\circ}C$) in 'Hongro' apples. The incidence of sunburn disorder was significantly decreased with day time spray (5.0%), all day spray (5.8%) and wind net (7.0%) when compared with untreated control (23.4%) in 'Fuji' apples. As a results, the treatment of fine water spray and wind net consequently showed 26% and 34% increase of redness ($a^*$) value in the skin color difference, respectively, in 'Fuji' apples.

Improvement of the Efficiency of a Twin-fluid Nozzle using Ultrasonic Vibration (초음파 가진을 이용한 2-유체 노즐의 효율 향상)

  • 주은선;나우정;정진도;송민근;이경열
    • Journal of Biosystems Engineering
    • /
    • v.27 no.4
    • /
    • pp.317-326
    • /
    • 2002
  • Characteristics of a twin-fluid spray with ultrasonic vibration were examined in order to obtain a high efficiency of cold-fog spray of the automatic pest control machine which has been widely used in protected horticulture recently. An electrostrictive vibrator of PZT BLT and a magnetostrictive $\pi$-type vibrator were used applied as the ultrasonic transducers with a frequency of 28 kHz. All experiments were conducted in 4 methods of spray ; a conventional spray method without ultrasonic forcing, an indirect vibration method with ultrasonic forcing, an improving-quality method by ultrasonic forced within liquid, and a combined-use method with both of the indirect vibration method and the improving quality method. It was found that the ultrasonic energy increased the atomization efficiency of spray droplets about 10% and especially much more in the case of the combined-use method.

Study on the Adaptiveness of Using an Injector As an Expansion Device of Refrigerator (냉동기 팽창장치로서 인젝터 사용의 적합성에 관한 연구)

  • Cho, B.O.
    • Journal of ILASS-Korea
    • /
    • v.5 no.3
    • /
    • pp.1-8
    • /
    • 2000
  • Spray as a liquid atomization technique has wide applications of combustion, painting, chemical, medical and agricultural purpose, and so on. Capillary tubes and expansion valves, as an expansion device of vapor compression type refrigerators, has been used from the early time. But there are some problems in practice, the former can't control refrigerant flowrate exactly and the later most of imported are expensive relatively and has some difficulties to install. Choosing an injector as a new concept of expansion device of refrigerator in this study to improve such troubles of the coming expansion device, the refrigerant spray behavior and refrigeration characteristics are evaluated experimentally. It is verified that the injector with a good function of refrigerant atomization plays a desirable role of refrigerant expansion in the actual refrigeration cycle.

  • PDF

The Best Spray Timing for the Control of the Bacterial Shot Hole with Bordeaux mixture (6-6) after Wintering in the Peach Orchard (복숭아 과원에서 월동 후 세균구멍병 방제를 위한 보르도액 최적 살포시기)

  • Kim, San Yeong;Park, Won Heum;Son, Hee Jung;Lee, Suk Hee;Song, Young Woon;Park, So Deuk
    • The Korean Journal of Pesticide Science
    • /
    • v.19 no.2
    • /
    • pp.106-112
    • /
    • 2015
  • This experiment was carried out to investigate the best spray timing for the control of the bacterial shot hole with Bordeaux mixture (6-6) after wintering in the peach orchard. We sprayed Bordeaux mixture (6-6) on 'Mibaekdo', 'Yumyeong' and 'Cheonhong' of peach verities from late-March to mid-April in 2001, 2002 and 2014, and examined how much bacterial shot hole and chemical injure occurred. The infection rate of bacterial shot hole according to spray time was 10.2 to 11.7% at leaves, and 1.7 to 2.2% at fruits in 2002. And Efficacy of the Bordeaux mixture treatment for control of bacterial shot hole at full blooming time 21.2 to 30.4% at leaves, 1.7 to 4.4% at fruits in 2014. The chemical injure occurred slightly for one week hence. The fruit bearing rate was 20.7 to 29.8% at 'Mibaekdo', and 35.4 to 61.9% at 'Yumyeong' peach trees. When the spray at the time of blooming period by bordeaux mixture was investigated the control effect of bacterial shot hole disease. The infected leaves was better than 21 to 25% twice the quantity of finished products and bordeaux self-preparation about 28 to 30% base quantity of finished products, also the control efficacy was higher in infected fruits trends in bordeaux self-preparation method and twice the quantity of finished products.

A New Spray Chrysanthemum Cultivar, 'Dream Water' with Single Type for Cut Flower (홑꽃형 절화용 스프레이 국화 '드림워터' 육성)

  • Jung, Yun-Kyung;Lim, Jae-Wook;Kim, Sung-Kee;Lee, Young-Soon;Yu, Ye-Young
    • Horticultural Science & Technology
    • /
    • v.30 no.2
    • /
    • pp.220-223
    • /
    • 2012
  • A new cultivar $Dendranthema$ $grandiflourm$ 'Dream Water' was developed at Gyeonggi-do Agricultural Research & Extension Services, Korea in 2009. The cultivar 'Dream Water' was initially derived from the cross in 2005 between 'Patra', a spray chrysanthemum cultivar with yellow single type, and 'Ruces', a spray chrysanthemum cultivar with white single type. The cultivar has single type with ivory petals. Trial evaluation was conducted from 2006 to 2009 for selection of this variety, including a shading culture in spring and a retarding culture in summer. The flowering time of 'Dream Water' was October 24th, and year-round flowering is possible by shading or lighting treatment. The diameter of the flower is 56.0 mm. Number of flowers per stem and petals per flower are 11.1 and 26.8, respectively. Its leaf color was green (Green Group 147A) and plant height was 89.7 cm. Days to flowering under the short day treatment is about 54 in spring, and diameter of flower center was 1.4 cm in the summer. The vase life was 16.7 days in autumn and consumer's preference of new spray chrysanthemum is high level than control.

Reducing the Effect of Ammonia Emissions from Paddy and Upland Soil with Deep Placement of Nitrogen Fertilizers (질소비료의 심층시비에 의한 논과 밭 토양의 암모니아 배출 억제 효과)

  • Sung-Chang Hong;Min-Wook Kim;Jin-Ho Kim
    • Korean Journal of Environmental Agriculture
    • /
    • v.41 no.4
    • /
    • pp.230-235
    • /
    • 2022
  • BACKGROUND: Ammonia gas emitted from nitrogen fertilizers applied in agricultural land is an environmental pollutant that catalyzes the formation of fine particulate matter (PM2.5). A significant portion (12-18%) of nitrogen fertilizer input for crop cultivation is emitted to the atmosphere as ammonia gas, a loss form of nitrogen fertilizer in agricultural land. The widely practiced method for fertilizer use in agricultural fields involves spraying the fertilizers on the surface of farmlands and mixing those with the soils through such means as rotary work. To test the potential reduction of ammonia emission by nitrogen fertilizers from the soil surface, we have added N, P, and K at 2 g each to the glass greenhouse soil, and the ammonia emission was analyzed. METHODS AND RESULTS: The treatment consisted of non-fertilization, surface spray (conventional fertilization), and soil depth spray at 10, 15, 20, 25, and 30 cm. Ammonia was collected using a self-manufactured vertical wind tunnel chamber, and it was quantified by the indophenol-blue method. As a result of analyzing ammonia emission after fertilizer treatments by soil depth, ammonia was emitted by the surface spray treatment immediately after spraying the fertilizer in the paddy soil, with no ammonia emission occurring at a soil depth of 10 cm to 30 cm. In the upland soil, ammonia was emitted by the surface spray treatment after 2 days of treatment, and there was no ammonia emission at a soil depth of 15 cm to 30 cm. Lettuce and Chinese cabbage treated with fertilizer at depths of 20 cm and 30 cm showed increases of fresh weight and nutrient and potassium contents. CONCLUSION(S): In conclusion, rather than the current fertilization method of spraying and mixing the fertilizers on the soil surface, deep placement of the nitrogen fertilizer in the soil at 10 cm or more in paddy fields and 15 cm or more in upland fields was considered as a better fertilization method to reduce ammonia emission.

Spray Pattern Analysis for a Centrifugal Fertilizer Distributor with Two Shutter Holes (두 개의 셔터 구멍이 적용된 원심식 비료 살포기의 살포패턴 분석)

  • Hwang, Seok-Joon;Park, Jeong-Hyeon;Lee, Ju-Yeon;Kim, Ki-Duck;Shin, Beom-Soo;Nam, Ju-Seok
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.18 no.10
    • /
    • pp.8-19
    • /
    • 2019
  • In this study, the spray pattern of a centrifugal fertilizer distributor with two shutter holes was analyzed and an effective driving width that satisfies proper spray uniformity was derived. The centrifugal fertilizer distributor was mounted on a tractor with a rated power of 23.7 kW and static and dynamic spray pattern tests were performed according to the standard procedure proposed by the American Society of Agricultural and Biological Engineers Standard ASAE S341.5. The height of the fertilizer distributor was 80 cm from the ground and the PTO (power take-off) shaft speed of the tractor was fixed at 540 rpm. The fertilizer scattered in space was collected using 275 evenly spaced collectors at shutter opening ratios of 25%, 50%, 75%, and 100%. The spray pattern was analyzed via the amount of sprayed fertilizer at each collector location and the coefficient of variation was used as an indicator of spray uniformity. Using the analyzed spray pattern, the effective driving width that satisfied less than 15% of the coefficient of variation was derived for different tractor driving patterns (race track mode, back and forth mode). From the results, spray uniformity increased as the shutter opening ratio decreased. The largest effective driving width was 8 m at a shutter opening ratio of 25% for both driving patterns.