• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.937-946
• /
• 1996

A Far Infrared Ray (FIR) dryer was designed , constructed and tested for red pepper , lycium chinese, and mushroom (Cortiellus shiitake ) drying , and the results were compared to the heated air dryer at the same condition. In the FIR dryer, three different panel materials , galvanized, copper and stainless steel, were used and no ceramic coating and those with ceramic coating (three panels) were 58% , 56%, 64%, and 88% , respectively. The drying times of lycium chinese and mushroom were shortened in FIR dryer by 6 hrs and 4 hrs compared to the heated air drying, respectively. while to remarkable difference in the drying times was found in the red pepper drying . The quality of products was better in FIR dryer where more red color value for red pepper and lycium chinese and more brightness for mushroom . The drying performance of a FIR dryer was superior in terms of total cost of 80,800 WON /100kg of lycium chinese , reduced by 25% compared to the heated air drying.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.2
• /
• pp.103-108
• /
• 2003

This study was performed to find out drying characteristics and develop waste heat recovery dryer. this system was initiated in order to recover discharged waste heat of drying air from drying chamber in agricultural products dryer and recycle for additional heat source that could save drying cost. The system consists of drying chamber, fan, burner, circulation pump and heat exchanger made of fins and tubes. For the system performance, drying experiments with fresh pepper were conducted, and comparisons on fuel consumption amount and drying performance were made between conventional dryer and the heat recovery system attached dryer.

• Journal of Biosystems Engineering
• /
• v.32 no.1 s.120
• /
• pp.20-29
• /
• 2007

Korean farmers have purchased agricultural dryer and low temperature storage system apart. In this study, the system was designed and constructed to investigate the practical application possibility of the air to air heat pump as drying and low temperature storage system for agricultural products with providing basic data. The performance and drying characteristics of the system evaluated by drying red pepper. The value of coefficient of performance of the system for heating was from 1.8 to 2.2 when ambient air temperature varied from 13$^{\circ}C$ to 23$^{\circ}C$. For operating the heat pump as dryer for drying red pepper by setting three drying air temperature of 50, 55 and 60$^{\circ}C$, specific moisture extraction rates meaning amount of energy consumption for removing moisture of 1kg from red pepper were 1.095, 1.017 and 1.094 kg$_{water}$/kWh, respectively. The drying period up to moisture ratio of 0.02 were 31, 26 and 21 hour, respectively. The lightness, redness, yellowness and chroma differences of red pepper dried by the heat pump dryer were lowered than those of red pepper dried by conventional heated air dryer except for yellowness difference at drying air temperature of 60$^{\circ}C$.

• Journal of Biosystems Engineering
• /
• v.13 no.2
• /
• pp.51-62
• /
• 1988

Bulk-type dryers which are widely used for drying special agricultural products such as tobaco leaf, red pepper, mushroom, ginseng, medicinal herb, etc, began to be distributed on a full scale since 1980 and the total number of dryers introduced to farms reached to about 36,600 units as of the end of 1986. In this study a survery was carried on the farmers cultivating special crops, dryer manufacturers and related administrative institutes and associations by means of on-the-spot investigation, mail or interview to collect data on scales and patterns of farming, utilization of bulk-type dryers, production and price streams of the special crops etc. Based on the analysis of the data surveyed predictions were made for the total demand on the bulk-type dryers and for annual demand over five-year span.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.12a
• /
• pp.421-427
• /
• 1999

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• v.11 no.1
• /
• pp.56-60
• /
• 2006

• Journal of Sericultural and Entomological Science
• /
• v.53 no.2
• /
• pp.101-109
• /
• 2015

To extend shelf life of mulberry fruits, usually expensive freeze drying of freezing process is required. In this study an economic to multipurpose agricultural products dryers with mulberry dryer and technique was developed to reduce postharvest processing cost. Fuel and electricity consumption for drying were lowest when drying temperature was $60^{\circ}C$. And various drying conditions (fuel 3 hrs, heat 1 hr, room temperature air velocity 51 hrs) of the developed dryer were analyzed to improve drying performance. Dried mulberry fruits had dark brown color and marketable high quality explain the semi-dried characteristics.

• Journal of Marine Bioscience and Biotechnology
• /
• v.2 no.1
• /
• pp.23-33
• /
• 2007

The constraints of traditional fish drying in Bangladesh have been reviewed and an effective solar fish dryer was developed with the small-scale processors and fishermen using locally available cheaper materials in order to dry fish in coastal region. After successful field testing, new solar dryer was demonstrated within the community in 3 different locations of Cox's Bazar for several batches of operations in each location from late September to March and found very effective in terms of architectural suitability, operational feasibility, technical efficiency, out-put quality (good texture, colour, flavour and long storage time), user's acceptability, commercial viability and environmental adequacy. A simple cost-profit analysis was done with the community operated products, which indicates that the new solar fish dryers could be operated profitably in coastal regions where sun-light and air flows are abundant.

• Journal of Biosystems Engineering
• /
• v.6 no.2
• /
• pp.48-57
• /
• 1982

In order to improve the quality of traditionally sun-dried red peppers and to increase the efficiency of drying performance, three types of solar dryers were designed and built, and drying performance of the solar dryers was compared to traditional sun drying. Results obtained from the experiment are summarized as fallows: 1. The air temperature and relative humidity profiles over a 8-hour period measured at the specified locations in the drying chamber of solar dryers appeared to have large variation in each dryer. The rate of drying increased with the temperature rise in the drying chamber of the solar dryer. 2. In general. drying with solar dryers proceeded faster than traditional sun drying. With A'-type of solar dryer developed in the second experiment it was possible to dry red peppers in seven days from an initial moisture content of 80% to safe storage conditions. The drying time with the A'-type solar drier was 50% shorter compared to traditional sun drying. 3. Red peppers appeared to have an increasing or constant-rate drying period until the weight of the product was reduced to about one half the initial weight, followed by a falling-rate drying period. When the dried red peppers were exposed to the atmospere during the night, the moisture content increased as much as 6%, which is much higher than for the grains. 4. It was suggested from the experiment that either a heat storage system or a supplemental heating system in the solar dryer was desirable for more efficient drying operation. 5. It was shown that the solar dryer developed in this study may be suitable for drying other vegetables and fishes, and also offered additional advantages of saving in drying time, maintaining sanitation and minimizing contamination by dust, insects and unfavorable weather condition.

• Journal of Biosystems Engineering
• /
• v.31 no.5 s.118
• /
• pp.395-402
• /
• 2006

Mixed heat transfer in an indirected NIR (Near Infrared Ray) dry chamber was investigated numerical analysis. It is Important that the miked heat transfer effects on double parameters which the Reynolds number and the position of emit lamp. Reynolds number are based on the outer diameter of the cylinder range from 103 to $30{\times}105$. Four difference heat transfer regimes of behavior are apparent: forced convection and radiation on the outer surface of the cylinder, pure conduction, pure natural convection and radiation between lamp surface and inner surface of the cylinder. The temperature and flow patterns are illustrated by iso-contour lines for the double parameters. Also presented are results on the convective heat transfer flux and the radiative heat transfer flux as increased with Reynolds number.