• Applied Biological Chemistry
• /
• 제27권
• /
• pp.18-28
• /
• 1984

In order to improve feed values of Korean agricultural by-products, various treatments including physical, chemical, physicochemical and fermentation were suggested in th is review article. Physical treatments such as chopping, grinding and pelleting reduce partiole size of agricultural by-products, and increase passage rate from the rumen, thus may increase voluntary feed intake and weight gain. Digestibility and voluntary feed intake of straw, rice hull and sawdust, also, may be increased by chemical treatment using sodium hydroxide or ammonia. Especially, because nitrogen content of by-products increase and toxic problem is not posed by ammonia treatment, it's practical usage is recommended in Korea. Silage or fermentation treatment using principles of microbial fermentation may improve palatability of low quality by-products. As mentioned above, it is concluded that various treatments suggested are desirable and improve feed value but may raise several problems. Unfortunately, because cost for installation and products is great and processing work is complicate, farmers are not using well these processing methods until now. Therefore, in order to increase the practical usage at farm level, it is thought that many research works be achieved for efficient process which have simple operation and low installation cost.

• 농촌계획
• /
• 제5권2호
• /
• pp.24-29
• /
• 1999

The soil from constructed wetland system for sewage treatment was analyzed to examine physical and chemical characteristics. Clogging and lowered permeability were the physical matters of concern, and nutrient and salt accumulation were the chemical matters of concern. However, the soil properties of the constructed wetland system after 3 year operation demonstrated no degradation and still the soil works almost same as the initial stage. Encouragingly, no sludge accumulation was observed inside the system. Therefore, it implies that the wetland sewage treatment system can work continuously as long as it is operated and managed properly not to cause excessive pollutant loading.

• 농촌지도와개발
• /
• 제4권2호
• /
• pp.431-442
• /
• 1997

The purpose of this study is to examine France's regional development policy in terms of rural development since the end of World War II. Following decentralization in 1982, France's regional and rural development policies have been focused on the interrelated actions of government, local authorities and European authorities. The aim of their works was to extend the dispersal of industrial activities to the reorganization of the rural space. The rural development policies aimed to the agricultural modernization in the 1950s have differed in their goals, methods, and implements. France's regional and rural development clearly illustrates the key role played by the government despite the decentralization and the challenges of the europeanization leading to a unique market of European nations. This reinforces the fact that the government is instrumental in organizing population distribution and regulating regional decision centers to harmonize both national objectives and local authorities' concerns. The French experience will be helpful as reference in the field of regional and rural development for Korea which has recently begun decentralizing.

• 농촌계획
• /
• 제10권2호
• /
• pp.43-49
• /
• 2004

According to the growing concerns of the public with efficiency and effects of regional policies, their assessment works have become an important issue. Up to now, several studies have been carried out on economic effects of policies using conventional cost/benefit analysis, while there have been few studies on assessment of amenity oriented policies. From the above consideration, this study tried to develop An Annual Expenditure Assessment Model (AEAM) for amenity-oriented policy-making in rural area. As a pre-work for model development, the hierarchical indices system for rural development and the classification system of expenditure were designed. Being based on high significant relationship between rural amenities and local government expenditure, a linear optimization model for maximization of regional amenity was constructed. Through a case study of Sunchang-gun, Chonbuk-province, the model applicability was ascertained.

• 한국잠사곤충학회지
• /
• 제2권
• /
• pp.83-88
• /
• 1962

These works were carried on to study the damage due to agricultural chemicals on silkworm and to find out the best ways to use them, considering, in the horticultural field, the utilization of them has rapidly been increased. The results may be summarized as follows: 1) The mulberry leaves being more than 100m from the horticultural field used the agricultural chemicals did not harm the silkworm. 2) Even if the mulberry leaves were located less than loom from the horticultural field sprayed with the chemicals, the silkworms were not injured after washing the mulberry leaves which were attached with the chemicals. 3) The chemicals, E.P.N., B. H. C. 2%, and Selesan were more seriously injured to silkworm than the other ones.

• 한국농촌생활과학회지
• /
• 제7권1호
• /
• pp.81-97
• /
• 1996

The purpose of this study was to analyze the structure of time use by housewives in rural households, and to compare the time use structure of housewives with that of their husbands. To attain this goals, we have selected 108 farmhouses considering agricultural area and size in L993. Data was collected by observing how (i. e., doing what kinds of work) housewives and husbands spend time, Time use was divided into four categories : physiological time, socio-cultural time, household work time and agricultural labor time. The results in this study present a valuable insight to assuage the overloaded works of rural housewives. The major results can be outlined as follows : 1. Rural housewives worked 1.2 times longer hours a day than their husbands did. 2, There existed a severe labour time imbalance between housewives and husbands during the busy farming season. 3. The time use patterns of housewives and husbands were significantly different across agricultural areas. Also, the education level of a housewife was associated with the length of her labor time.

• 항공우주시스템공학회지
• /
• 제4권1호
• /
• pp.15-18
• /
• 2010

In the hot summer manual spray work for plants would be the hardest one among the agricultural field works. Besides the physical load the possible toxication would strongly ask a way to do the job on behalf of human. Although an aircraft with sprayer could be a good candidate, the manned airplanes do not play proper roles in our country because of field geometry. Today, unmanned helicopter as expensive as 200,000 dollars can do the job with high risk of control. Therefore safe and cheap air vehicle with sprayer, if developed, could be a great help to agriculture.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권3호
• /
• pp.239-244
• /
• 1998

Dried carrot meal (DCM) prepared from fresh carrot was found to be a good source of xanthophyll (54 mg/kg) and morderate source of protein (188.3 g/kg) and energy (2,510 kcal/kg) with low level of fibre (80 g/kg). DM, EE and NFE content of DCM were 895, 35 and 661.7 g/kg respectively. The ingredient was used in laying hen diet to evaluate its pigmenting value for egg yolk. Thirty-two laying hens from Starcross strain were divided into four groups and fed four different diets: a control diet containing 62% ground wheat, a corn-based diet (50% ground yellow corn), control + 4% DCM and control + 8% DCM. Use of DCM at 8% level in layer mash significantly improved yolk colour at 3rd, 6th and 9th week of supplementation in comparison with wheat-based control diet. This improvement was statististically similar to that obtained from yellow corn-based diet. DCM at 4% level also improved yolk colour score. Wheat-based diet significantly increased feed consumption compared to yellow corn and diet supplied with 8% DCM. Body weight gain, egg production, feed conversion were not significantly affected due to dietary addition of DCM and no mortality was observed during 63-day experimental period. Further works on DCM are suggested.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.438-445
• /
• 2000

Positioning garlic cloves in upright standing in garlic field has been regarded as a very important job because it affects clove rooting, growing and, eventually, quality and yield in garlic production, Because of the geometrical uniqueness and irregularity of garlic cloves in shape, the planting operation has been conducted by manual work that needs a tremendous human labors and increases garlic production cost. The overall objective of this research was to develop garlic planting machine through investigating physical properties of garlic and designing clove upright positioning device after figuring out the factors affecting metering device and upright clove positioning mechanism. With the outcomes of the metering and posture positioning experiment, a garlic clove planter having twelve planting rows was developed for 37kW type tractor and feasibility test was carried out in the field. And, According to the performance test and cost analysis, the planter could accomplish planting operation of one hectare plot in 6.3 hours giving 48 times better efficiency, 6.3hrs/ha, and 74.2% of production cost reduction effect, 1,092,546won/ha, than the manual works of 299hrs/ha and 282,258won/ha. And, break-even point ofthe planter was calculated as of 2.71 hectares.

• 한국농공학회지
• /
• 제24권2호
• /
• pp.49-55
• /
• 1982

The purpose of this study is to classify the factors influenced on the damages of head works suffered from the storm flood occurred on July 22 1980 in both Musim and Bochong rivers and to find out an integral counter measures against the causes influenced on the disaster of head works in the engineering aspect of planning, design, construction and maintenance. In this survey, number of samples was taken 25 head Works, and the counter measures against the causes of their disasters summarized was as follows, 1. In the aspect of planning a. As the flood water level after the establishment of head works is more increased than the level before setting of head works owing to having more gentle slope of river bed between the head works than nature slope of river bed. Number of head works should be reduced for the appropriate annexation of them b. In the place where head works is established on the curved point of levee, the destruction of levee becomes severe by the strong deflective current. Therefore the setting of head works on the curved point should be kept off as long as possible and in case of unavoidable circumstances the construction method such as reinforced concrete wall or stone wall filed with concrete and anchored bank revetments should be considered. 2. In the aspect of design a. As scoring phenomena at up stream is serious around the weir Where the concentration of strong current is present in such a place, up stream apron having impermeability should be designed to resist and prevent scoring. b. As the length of apron and protected bed is too short to prevent scoring as down stream bed, the design length should be taken somewhat more than the calculated value, but in the case the calculated length becomes too long to be profitable, a device of water cushion should be considered. c. The structure of protected river bed should be improved to make stone mesh bags fixed to apron and to have vinyl mattress laid on river bed together with the improvement for increasing the stability of stone mesh bags and preventing the sucked sand from the river bed. d. As the shortage of cut-off length, especialy in case of the cutoffs conneting both shore sides of river makes the cause of destruction of embankment and weir body, the culculation of cut-off length should be taken enough length based on seepage length. 3. In the aspect of design and constructions a. The overturing destruction of weir by piping action was based on the jet water through cracks at the construction and expansion joints. therefore the expansion joint should be designed and constructed with the insertion of water proof plate and asphalt filling, and the construction joint, with concaved shape structure and steel reinforcement. b. As the wrong design and construction of the weep holes on apron will cause water piping and weir destruction, the design and construction of filter based on the rule of filter should be kept for weep holes. c. The wrong design and construction of bank revetment caused the severe destruction of levee and weir body resulting from scoring and impulse by strong current and formation of water route behind the revetment. Therefore bank revetment should be designod and constructed with stone wall filled with concrete and anchored, or reinforced concrete wall to prevent the formation of water flow route behind the wall and to resist against the scoring and impulse of strong stream. 4. In the aspect of maintenance When the damaged parts occurred at head works the authorities and farmers concerned should find and mend them as soon as possible with mutual cooperation, and on the other hand public citizen should be guided for good use of public property.