• KEPCO Journal on Electric Power and Energy
• /
• v.3 no.2
• /
• pp.127-131
• /
• 2017

The present paper describes the slagging field data obtained with the one-dimensional process model for the 500 MW tangentially coal fired boiler in Korea. To obtain slagging field data in terms of thermal resistances [$m^2{\cdot}^{\circ}C/kW$], a number of plant data were collected and analyzed with the one-dimensional modelling software at 500 MW full load. The slagging field data for the primary superheater were obtained for six coal blends, and compared with two TMA (Thermo-Mechanical analyzer) slagging indices and the numerical slagging index, along with the conventional slagging indices which were modified with the ash loading. The advanced two TMA indices for six blended coals give a good slagging tendency when comparing them with the slagging field data, while the modified conventional slagging indices give a relatively poor agreement.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.5
• /
• pp.773-781
• /
• 2004

This research was Performed to raise grade efficiency of Sturtevant type air classifier. to treat powder less than $74\mu\textrm{m}$ particle produced at the crushing process of the dry aggregates manufacturing system or concrete wastes recycling system. The experimental conditions were in the ranges. 0.85 to 5.15 $m^3$/s of primary air flow rate. 0.005 to 0.015 $m^3$/s of secondary air flow rate $30^{\circ}$ to $70^{\circ}$ of auxiliary blades angle. respectively. for 1.7~3.3 kg/min of the powder feed rate. It was found that the grade efficiency of the air classifier was increased as the baffle plate was attached at the expansion region. and the optimal operating conditions of the air flow rates and the blade angle were obtained. The fractional recovery curves from the experiments were well agreement with the theoretical one of Molerus model.

• Fashion, Industry and Education
• /
• v.14 no.1
• /
• pp.1-9
• /
• 2016

This study examined the comparative advantage of manmade textile (MMT) industries in the United States (US) and South Korea (SK). The Revealed Comparative Advantage (RCA) framework was used to assess the MMT industries' performance in both countries from 2004 to 2013. With the recent ratification of the United States-South Korea Free Trade Agreement (KORUS FTA), it is important to understand the current state of these industries. Using UN Comtrade export data, the RCA index values were calculated and analyzed for 27 MMT commodities, three aggregate groups, and the whole industry. It was found that SK had a consistent comparative advantage for the whole industry. Furthermore, SK had a larger number of products with a comparative advantage. The research findings indicate that the MMT industry in SK is likely to outperform the US following the complete ratification of the KORUS FTA.

• Journal of the Korean Society of Combustion
• /
• v.21 no.3
• /
• pp.16-23
• /
• 2016

In this study, skeletal mechanisms are produced by directed relation graph with specified threshold value and sensitivity analysis based on species database from the directed relation graph. Skeletal mechanism is optimized through the elimination of unimportant reaction steps by computational singular perturbation importance index. Reduction is performed for the detailed mechanism of methyl butanoate consisting of 264 species and 1219 elementary reactions. Validation shows acceptable agreement for auto-ignition delays in wide parametric ranges of pressure, temperature and equivalence ratio. Methyl butanoate has been proposed as a simple biodiesel surrogate although the alkyl chain consists of four carbon atoms. The resulting surrogate mechanism for n-heptane and MB consists of 76 species and 226 reaction steps including those for NOx.

• Korean Journal of Veterinary Research
• /
• v.39 no.4
• /
• pp.806-810
• /
• 1999

A multiplex-polymerase chain reaction (PCR) assay was used to detect staphylococcal enterotoxin production by 12 strains of Staphylococcus aureus isolated from clinical specimens. To evaluate the efficacy and/or sensitivity of this method, the results were compared to those obtained with the reversed passive latex agglutination kit (SET-RPLA, Denka Seiken, Japan). Of 10 strains positive by PCR were positive by RPLA but two strains, representing high sensitivity of the former method. Enterotoxin B was the most prevalent by the two methods. The kappa index between the two methods was 0.826, indicating a higher agreement and fully reliable for use. These results would suggest that sensitive, inexpensive, and relatively rapid multiplex-PCR technique may be an effective means for the detection of staphylococcal enterotoxin genes as an alternative to traditional methods such as kits or immunological methods, which depend upon the amount of enterotoxin produced.

• Journal of electromagnetic engineering and science
• /
• v.13 no.2
• /
• pp.137-139
• /
• 2013

A compact metamaterial (MTM)-based tunable phase shifter consisting of four unit cells with a simple DC bias circuit has been designed at 2.4 GHz. The variable series capacitors and shunt inductors that are required to be loaded periodically onto a host transmission line are realized employing only chip variable capacitors (varactors). In addition, the proposed phase shifter requires only one DC bias source to control the varactors, with the matching condition of the MTM line automatically satisfied. The measured phase shifting range is $285.2^{\circ}$ (from $-74.2^{\circ}$ to $211^{\circ}$). The measured insertion loss is approximately 1.5 dB. The circuit/electromagnetic-simulated and measured results are in good agreement.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.6
• /
• pp.809-813
• /
• 2009

We want to show that the construct of best fuzzy tests for certain fuzzy situations of Poisson distribution. Due to Neyman and Pearson theorem, if we have ${\theta}_0$ and ${\theta}_1$ be distinct fuzzy values of ${\Omega}=\{{\theta}\;:\;{\theta}\;=\;{\theta}_0,\;{\theta}_1\}$ such that $L({\theta}_0\;:\;X)/L({\theta}_1\;:\;X)$ < k, then k is a fuzzy number. For each fuzzy random samples point $X\;{\subset}\;C$, we have most power test for fuzzy critical region C by agreement index.

• Structural Engineering and Mechanics
• /
• v.56 no.6
• /
• pp.1003-1020
• /
• 2015

In this study, free vibration analysis of an edge cracked multilayered symmetric sandwich beams made of functionally graded materials are investigated. Modelling of the cracked structure is based on the linear elastic fracture mechanics theory. Material properties of the functionally graded beams change in the thickness direction according to the power and exponential laws. To represent functionally graded symmetric sandwich beams more realistic, fifty layered beam is considered. Composition of each layer is different although each layer is isotropic and homogeneous. The considered problem is carried out within the Timoshenko first order shear deformation beam theory by using finite element method. A MATLAB code developed to calculate natural frequencies for clamped and simply supported conditions. The obtained results are compared with published studies and excellent agreement is observed. In the study, the effects of crack location, depth of the crack, power law index and slenderness ratio on the natural frequencies are investigated.

• Magazine of the Korea Concrete Institute
• /
• v.3 no.3
• /
• pp.121-128
• /
• 1991

Thicknesses of the hase concrete blocks supportmg large machmes were estimated by analyzing the res- 0 ¬nance modes of mechanical Vibrations The vibration was produced by the mechanical impact with steel ball drop and detected by a wideband comcal piezoelectric transducei. The detected signals were analyzed by FFT and thicknesses of specimen were determined by the resonant frequency of vibratIon. For the layered concrete block, the estimated thickness is dependent on the acoustic reflective index at the boundary between layers. The estimated thickness up to 100em were in goo:l agreement with the real value. In additlOn. this technique could be applicable to the estimation of the bondmg status of the layered structures.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1394-1400
• /
• 2014

The current flowing through the overhead transmission lines causes induced voltage on the communication lines, which can be prevented by calculating the induced voltage at the planning stage for overhead transmission line installment through an agreement between the communication and electric power companies. The procedures to calculate the induced voltages, however, are complicated due to the variety of parameters and tower types of the overhead transmission lines. The difficulty necessitates the development of a simulator to measure the induced voltage on the communication lines. This paper presents two simulators developed for this purpose; one using the Data Base (DB) index method and the other using the Graphic User Interface (GUI) method. The simulators described in this paper have been implemented by the EMTP (Electromagnetic Transient Program).