• International Journal of Railway
• /
• v.2 no.3
• /
• pp.107-112
• /
• 2009

Research projects of SNCF aim at reducing the costs of infrastructure possessions and improving the operational equipment availability and safety. This permanent search for a better regularity led the SNCF to analyse the maintenance approach of signalling equipment in detail. Until now, it was commonly acknowledged that signalling equipment, which consists of many electronic devices, is not subject to aging. In this study, a Weibull lifetime model, able to describe an aging phenomenon, is used and it can be shown that the deterioration is statistically significant. The validity of the model is tested. We also analyse the influence of environmental covariates. We simulate different scenarios in order to investigate the impact of several maintenance strategies as well as on future maintenance costs, on the amount of components to replace based on the mean age of the network. It can be shown that in most cases a systematic replacement strategy offers the best solution.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1356-1362
• /
• 2015

The location of PV systems in distribution system has been increased as one of countermeasure for global environmental issues. As the operation efficiency of PV systems is getting decreased year by year due to the aging phenomenon and maintenance problems, the optimal algorithm for state diagnosis in PV systems is required in order to improve operation performance in PV systems. The existing output prediction algorithms considering various parameters and conditions of PV modules could have complicated calculation process and then their results may have a possibility of significant prediction error. To solve these problems, this paper proposes an optimal prediction algorithm of PV system by using least square methods of linear regression analysis. And also, this paper presents a performance evaluation algorithm in PV modules based on the proposed optimal prediction algorithm of PV system. The simulation results show that the proposed algorithm is a practical tool of the state diagnosis for performance improvement in PV systems.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.107-118
• /
• 2000

For the last several decades, the fate of organic pollutants has been extensively studied in natural environments with emphasis on sorption and desorption phenomena. Although the mechanisms involved are not clear yet there is a consensus about the existence of hysteresis in the sorption and desorption of organic pollutants. Furthermore, it is found that hysteresis is the outcome of slow nonequilibrium sorption of organic pollutants, which results in the formation of desorption-resistant fractions of the pollutants. Desorption-resistant fractions may increase as a function of the residence time of the pollutants in the environments. Field monitoring data show a slow but continuous decline of chemicals applied to soil, followed by little or no subsequent disappearance. One plausible explanation for such resistance to biodegradation, desorption, or extraction can be attributed the gradual movement of organic pollutants to less accessible remote sites inside the matrix with time. This phenomenon has been termed sequestration or aging. The fact that some pollutants are sequestered in soil with time may have a great impact on bioremediation and risk assessment, Some portion of the resistant pollutants may still be present in the environments after bioremediation. It requires vigorous means to completely remove the aged portion that may not be further bioavailable. However, precaution should be taken since aging is not always evident. Aging seems to be soil and chemical specific.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.4
• /
• pp.38-43
• /
• 2011

For the efficient and safe operation of nuclear power plant, evaluating quantitatively aging phenomenon of major components is necessary. Especially, typical aging parameters such as stresses and cumulative usage factors should be determined accurately to manage the lifetime of the plant facility. The 3-D finite element(FE) model is generated to calculate the aging parameters. Mechanical and thermal transfer functions called Green's functions are developed for the FE model with standard step input. The stress results estimated from transfer functions are verified by comparing with 3-D FE analyses results. Lastly, we suggest an effective fatigue evaluation methodology by using the transfer functions. The usefulness of the proposed fatigue evaluation methodology can be maximized by combining it with an on-line monitoring system.

• Elastomers and Composites
• /
• v.33 no.3
• /
• pp.159-167
• /
• 1998

Rubber products are aged like human complexion by the attack of oxygen, ultra violet, ozone, etc.. Aging is very important and also very complicated phenomenon to understand. This may explain the rarity of papers on this subject. In this study, we tried to understand the aging behavior of EPDM compared to that of natural rubber. We also compared the sulfur vulcanized system to the peroxide vulcanized one. In our experiment, the peroxide vulcanizates were more advantageous in aging than the sulfur vulcanizates. The authors belived that this study about the high performance EPDM would be applicable to rubber industry.

• Journal of Magnetics
• /
• v.16 no.3
• /
• pp.225-228
• /
• 2011

Magnetic properties and Rockwell hardness of 1Cr-0.5Mo steel have been investigated as a function of isothermal aging time. Our results showed that coercivity, hysteresis loss and Rockwell hardness in the aged samples decreased as aging time increased. This phenomenon was analyzed using optical microscopy and scanning electron microscopy. A significant diffusion of Cr and Mo atoms formed $M_2C$ and $M_7C$ carbides, lowering the matrix strength. $M_2C$ and $M_7C$ carbides partially segregated inside grains, diffused into grain boundaries, and finally resulted in a soft ferrite matrix and a hard grain boundary. The magnetic and mechanical softening of the matrix is likely to govern the properties of the sample more than the hardening of the grain boundary by carbide precipitations.

• Elastomers and Composites
• /
• v.53 no.4
• /
• pp.213-219
• /
• 2018

The degradation mechanism and physical properties of an FKM O-ring were observed with thermal aging in this experiment. From X-ray photoelectron spectroscopy (XPS) analysis, we could observe carbon (285 eV), fluoro (688 eV), and oxygen (531 eV) peaks. Before thermal aging, the concentration of fluoro atoms was 51.23%, which decreased to 8.29% after thermal aging. The concentration of oxygen atoms increased from 3.16% to 20.39%. Under thermal aging, the FKM O-ring exhibited debonding of the fluoro-bond by oxidation. Analysis of the C1s, O1s, and F1s peaks revealed that the degradation reaction usually occurred at the C-F, C-F2, and C-F3 bonds, and generated a carboxyl group (-COOH) by oxidation. Due to the debonding reaction and decreasing mobility, the glass transition temperature of the FKM O-ring increased from $-15.91^{\circ}C$ to $-13.79^{\circ}C$. From the intermittent CSR test, the initial sealing force was 2,149.6 N, which decreased to 1,156.2 N after thermal aging. Thus, under thermal aging, the sealing force decreased to 46.2%, compared with its initial state. This phenomenon was caused by the debonding reaction and decreasing mobility of the FKM O-ring. The S-S curve exhibited a 50% increase in modulus, with break at a low strain and stress state. This was also attributed to the decreasing mobility due to thermal aging degradation.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.1
• /
• pp.35-42
• /
• 2024

Recently, with the miniaturization and high integration of semiconductor chips, the bump bridge phenomenon caused by fine pitches is drawing attention as a problem. Accordingly, Cu pillar bump, which can minimize the bump bridge phenomenon, is widely applied in the semiconductor package industry for fine pitch applications. When exposed to a high-temperature environment, the thickness of the intermetallic compound (IMC) formed at the joint interface increases, and at the same time, Kirkendall void is formed and grown inside some IMC/Cu and IMC interfaces. Therefore, it is important to control the excessive growth of IMC and the formation and growth of Kirkendall voids because they weaken the mechanical reliability of the joints. Therefore, in this study, isothermal aging evaluation of Cu pillar bump joints with a CS (Cu+ Sn-1.8Ag Solder) structure was performed and the corresponding results was reported.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.156-159
• /
• 2006

The aging of population is a social phenomenon commonly observed in advanced countries. It causes various problems. Thus the aged problem must be approached from quality of life, which the elderly pursue instinctively regardless of their life cycle, and the utilization of their spare time or leisure hours. However, there have been research reports that, if the elderly participate in voluntary and active meaningful leisure, they can achieve successful adaptation to their aging and the life in their old age. In particular, we need to give our attention to the fact that, compared to other leisure activities, recreational sports make significant contributions to successful aging. When the aged participate in active leisure and recreational sports regularly, their satisfaction with spare time is enhanced and their loneliness is relieved, which resultantly brings high life satisfaction. This suggests that recreational sports activities enable the aged to achieve successful aging and contribute to the solution of the aged problem. In order to promote physical activity for aging population, we must utilize MINIMAX strategies.

• Journal of Adhesion and Interface
• /
• v.3 no.2
• /
• pp.40-44
• /
• 2002

We invested effect of the keeping-time of uncured composite and thermal aging, of cured composite on adhesive strength for rubber-brass coated steel cord composite in this study. We also evaluated how the adhesive strength affects to tire endurance. Using PAD adhesion specimen, peel adhesive strength was measured. The uncured composite was kept for several days up to 35 days in factory. Cured composite was also kept for 5 and 10 days at $85^{\circ}C$ in dry oven. Peel adhesive strength was decreased with increasing keeping-time and showed lower value with increasing thermal aging time. The lower peel adhesive strength, the lower tire-endurance. This fact was caused by the humidity and thermal aging which affected in the decrease of adhesive strength of the rubber-steel cord composite and resulted in interface fracture between rubber and steel cord. This phenomenon was confirmed from SEM investigation and tire-endurance. It was just known that corrosion of steel cord's surface and aging of adhesive layer strongly affected to decrease of adhesive strength. This resulted in directly decreasing tire-endurance.