• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.2
• /
• pp.93-98
• /
• 1983

Apple sugaring and apple nectar gel were treated with coating agent, and then the rate of weight loss, browning reaction and fungi growth on the storage conditions of those were investigated. The results obtained were summarized as follows; The composition of sucrose, D-sorbitol, corn syrup, gelatin, arabia gum, citric acid, sodium citrate and sodium ascorbate as a nontoxic coating agent was desirable to repress weight loss browning reaction and fungi growth of apple sugaring and apple nectar gel. It was the most effective method that apple sugaring was treated with the coating agent and refrigerated with double packaging. The contraction by weight loss, browning reaction and fungi growth of apple nectar gel treated with the coating agent and freezed with double packaging were repressed.

• Macromolecular Research
• /
• v.14 no.3
• /
• pp.261-266
• /
• 2006

Blends of silicone rubber (VMQ) and liquid crystalline polymer (LCP) were prepared using a melt blending technique in the presence and absence of glass fiber and coupling agents. The effect of glass fiber and coupling agents on the thermal, dynamic mechanical, morphological pro-perties and cure characteristics of VMQ/LCP blends were studied. The vinyl silane coupling agent showed a significant effect on the above mentioned properties of VMQ/LCP blends by reacting at the interface between VMQ and LCP. The viscosity of the VMQ/LCP blends decreased with the addition of a coupling agent. A substantial improvement in storage modulus of VMQ/LCP blends was observed in the presence of glass fiber and coupling agents. However, as a coupling agent vinyl silane proved to be better than amine for the VMQ/LCP-glass-containing blends. The thermal stability of the pure silicone rubber was higher than those of the blends. This high thermal stability of silicone rubber was attributed to the Si-O-Si bonds. However, the thermal stability of the blends decreased further in the presence of a coupling agent, possibly due to a decrease in blend crystallinity.

• Textile Coloration and Finishing
• /
• v.27 no.4
• /
• pp.301-308
• /
• 2015

This study optimizes dyeing conditions for polyamide-imide fabric using cationic dyes. Dyeing and fastness characteristics of polyamide-imide fabric were investigated with three cationic dyes and 2-hydroxyacetophenone as a swelling agent under various dyeing conditions such as dye and swelling agent concentrations, dyeing temperature and time, pH of dye bath. The dyeing properties were evaluated in terms of dye exhaustion, K/S value and color fastness. The optimized dyeing temperature and time were $130^{\circ}C$ for 90 min for the dyes. Under weak acidic conditions in the range pH 5 to 7, the exhaustion of cationic dyes could be enhanced leading to higher adsorption. Wash and rubbing fastness properties were generally good, while light fastness was slightly low, which can be attributed to the poor photo-stability of the cationic dyes.

• Journal of the Korean Ceramic Society
• /
• v.51 no.6
• /
• pp.575-583
• /
• 2014

The flue gas desulfurization (FGD) process is currently the most effective process utilized to remove sulfur dioxide from stack gases of coal-fired plants. However, FGD systems use a lot of limestone as desulfurizing agent. In this study, we use limestone sludge, which is a by-product of the steel industry, to replace the desulfurizing agent of the FGD system. The limestone particle size is found to be unrelated to the desulfurizing rate; the gypsum purity, however, is related. Limestone sludge mixes with limestone slurry delivered at a constant rate in a desulfurizing agent with organic acid are expected to lead to a high desulfurization efficiency and high quality by-product (gypsum).

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.1
• /
• pp.119-126
• /
• 2016

The US Army used MARK-1 composed of atropine autoinjector and 2-PAM autoinjector as a medical countermeasure against nerve agent poisoning. Recently, it has been being replaced by the ATNAA(Antidote Treatment Nerve Agent AutoInjector) for improvement the convenience in use and rapid detoxification effect. ATNAA(FDA approval, NDA 21-175, 2002. 1. 17) is a multi-chambered autoinjector that sequentially delivers atropine and 2-PAM through a single needle to allow Warfighters to survive against lethal exposure to nerve agents. In this paper, our group investigated the case of FDA approval of ATNAA in a point of the various data required by FDA guideline, thereby making it easy to meet the KFDA guideline for the approval of the prototype our group has been developed. The purpose of this study is to provide a reference for efficient research activities to minimize time and cost. Additionally, the purpose of this study is to provide a reference for the planning for the development of similar drug.

• 연구논문집
• /
• s.34
• /
• pp.113-119
• /
• 2004

Recently, the conventional concept of a machine-tool in manufacturing systems is changing from the target of integration to the autonomous manufacturing device based on a knowledge evolution. Subsequently, a machine-tool has been the subject of a cooperation through an advanced environment where an open architecture controller, high speed network and internet technology are contained In the future, a machine-tool will be more improved in the form of a knowledge evolution based device. In order to develop the knowledge evolution based machine-tool, this paper proposes the structure of knowledge evolution and the scheme of a dialogue agent among agent-based modules such as a sensory module, a dialogue module, and an expert system. The dialogue agent has a role of interfacing with another machine for cooperation. To design of the dialogue agent module in M2M(Machine To Machine)environment, FIPA-OS and ping agent based on FIPA-OS are analyzed in this study. Through this, it is expected that the dialogue agent module can be more efficiently designed and the knowledge evolution based machine-tool can be hereafter more easily implemented.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.317-326
• /
• 2021

In this study, we investigated for Bio-EPDM foam with oyster shell surface modified earth coupling agent. Experiments were carried out to confirm the bio-EPDM/Oyster shell foam applying content of earth coupling agent. The cure characterization were evaluated by measuring the mooney viscosity and oscillating disc rheometer (ODR). Mechanical properties such as hardness, tensile strength, elogation at break and tear strength were measured, and changes of mechanical properties were also evaluated after immersion in NaCl solution. In addition degree of volume change was measured after immersing the Bio-EPDM foam in NaCl solution and the low-temperature permanent compression set was evaluated at 4℃. To evaluate the low-temperature characteristics of Bio-EPDM/Oyster shell, the glass transition temperature was measured using Differential Scanning Calorimeter (DSC). As a result as the content of the earth coupling agent increased up to 3phr, the crosslinking density and mooney viscosity increased, and the mechanical properties and low-temperature permanent compression set improved, but from 4phr, it was rather decreased. The change in the glass transition temperature was insignificant, and the foam cell appeared to be uniform when the earth coupling agent was applied.

• Korean Journal of Materials Research
• /
• v.22 no.12
• /
• pp.658-663
• /
• 2012

The electrical properties of a laminated SMD type PTC thermistor for microcircuit protection were investigated as a function of polymer blowing agent addition. Green ceramics for multilayered $BaTiO_3$-based PTCRs were formed by doctor blade method of barium titanate powders; we successfully laminated the sintered ceramic chips to obtain 10 layer chip PTCRs with PTC effect. The sintered density increases with increasing sintering temperature. The electrical properties of the sintered samples were strongly dependent on the calcination and addition of a polymer blowing agent. When $BaTiO_3$ powders containing 0.2 mol% of $Y_2O_3$ were calcined at $1000^{\circ}C$ for 2 hrs, the resistivity jump was of 1-2 orders of magnitude. The resistivity at room temperature increases according to the polymer blowing agent addition. Also, the sample using the calcined powder showed a lower resistivity than that of the sample prepared using powders without calcinations. With an increase in the OBSH, the magnitude of the resistivity jumped as a function of the temperature increase. The resistivity of the sintered bodies after the addition of 0.5 wt% polymer blowing agent at $1290^{\circ}C$ for 2 h was shown to be about $8.5{\Omega}{\cdot}cm$; the jump order of the sintered bodies was shown to be on the order of $10^2$.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.2
• /
• pp.125-134
• /
• 2013

Various antimicrobial technologies have been developed to inactivate bioaerosols in indoor environments. In this study, air filter media were treated with a natural antibacterial agent of Sophora flavescens in order to inactivate the bacteria collected on the air filter. Three treatment methods were applied to manufacture the test antibacterial air filter media: electrospray, nebulization and dip-coating methods. In case of electrospray and nebulization processes, the size distribution of aerosolized natural antibacterial agent was measured using a scanning mobility particle sizer. Staphylococcus epidermidis bacteria were aerosolized to test inactivation of the filter media treated with a natural antibacterial agent. The pressure drop and the antibacterial efficiency of the filter media increased with increasing the mass loading of natural antibacterial agent in each treatment method. The antibacterial efficiency per loaded antibacterial agent mass by the electrospray method was the highest and the filter treated by the dip-coating method was the lowest among three treatment methods.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.05a
• /
• pp.1702-1706
• /
• 2006

In the field of rice research, insertional mutants have become a valuable resource for studies of gene function. However, a well-designed database yet in the area of rice functional genomics. The relevant data are widely distributed and independently managed by the individual research groups. Heterogeneous data format in the distributed database systems causes many problems related to redundancy and compatibility. In this research, integration of the distributed databases using agent technology is pursued. In particular, a data integration agent, an ontology agent, a comparison agent, and resource agents are designed, whereby the integrated database is maintained. Moreover a framework for the web-based information system, which provides information to biologists and permits biologists to add new data to the database, is proposed. To establish an interoperable data format, an XML-based data model is also developed adopting ontology concept.