• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 학술발표회 논문집(Proceedings of the Korean Textile Conference)
• /
• pp.285-288
• /
• 2001

• Nuclear Engineering and Technology
• /
• 제5권1호
• /
• pp.55-64
• /
• 1973

압축변형시킨 순천(0.007% 탄소포함)을 8$0^{\circ}C$이하에서 저온열처리(ageing)한 후, 열처리시간에 따라 증가하는 저항복점(lower yield point)의 변화를 압축시험으로 측정하여 그 strain ageing 효과를 조사했다. 본 실험에서 압축변형된 순철의 strain ageing 속도는 저항복응력의 증가가 그치고 중가의 60% 정도에 이를 때까지 열처리시간의 2/3승에 비례했으나, 이미 알려진 인장변형의 경우에서보다 느렸다. 이 60%의 증가는 순철을 6$0^{\circ}C$에서 약 5시간 열처리함으로써 얻었다. 압축변형된 순철의 strain ageing을 위한 활성화에너지는 열처리의 초기단계(6$0^{\circ}C$에서 약 30분)에서 21,500 cal/mole이었는데, 이것은 인장변형의 경우에서 알려진 것보다 대략 10%가 큰 값이다. 이 증가는 잔유응력에 의해 결정내에 형성되는 strain field로 설명되었다. 열처리공정의 둘깨단계(6$0^{\circ}C$에서 약 5시간까지 계속되는)에서는 그 활성화에너지가 다소 감소되는 경향이 있었다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1994년도 특별강연 및 춘계학술발표 개요집
• /
• pp.44-47
• /
• 1994

The ageing behavior of Cu-bearing HSLA steels was studied by using Differential scanning calorimetry(DSC), Transmission electron microscopy and hardness tester. Two heat evolution peaks were observed during DSC scans over the temperature range of 25～590$^{\circ}C$ at a heating rate of 5$^{\circ}C$/min. The peaks appeared in low (241∼319$^{\circ}C$ : HSLA-A, 224∼310$^{\circ}C$ : HSLA-B) and high temperature (514∼590$^{\circ}C$ : HSLA-A, 451∼558$^{\circ}C$ : HSLA-B) are attributed to the formation of coherent Cu-clusters and noncoherent $\varepsilon$-Cu phase, respectively. It was confirmed that as ageing proceeds, the coherent bcc Cu-clusters transform to noncoherent fcc $\varepsilon$-Cu phase. In the case of the ageing to peak hardness at 300$^{\circ}C$ and 400$^{\circ}C$, the coherent Cu-clusters contributed to the hardening. As ageing time and temperature increase over peak hardness, noncoherent $\varepsilon$-Cu are formed and hardness decreases.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1994년도 특별강연 및 춘계학술발표 개요집
• /
• pp.39-43
• /
• 1994

The effects of ageing treatment on the mechanical properties of two Cu-bearing HSLA(High Strength Low Alloy) steels, HSLA-A and HSLA-B ,were studied by means of SEM, TEM, tensile, charpy impact and hardness tests. These steels showed excellent combination in strength and toughness at an ageing of $650^{\circ}C$ by the precipitation of $\varepsilon$-Cu and low carbon alloying. The peak strength was achieved at an ageing of 50$0^{\circ}C$ in both steels, while the impact energy was very low in this peak strength. With ageing temperature above this temperature, strength was decreased whereas impact energy increased. A marked increase in hardness above 675$^{\circ}C$ was associated with the formation of “M-A constituents” which forms during cooling from austenite-ferrite two phase region. The impact transition temperature of HSLA-A and HSLA-B steels were -l$25^{\circ}C$ and -145$^{\circ}C$, respectively.

• 경영과정보연구
• /
• 제18권
• /
• pp.1-19
• /
• 2006

Ageing induces huge dramatic change of society and economy rather than simple change of population structure. Ageing causes the decrease of working age population and production capable population, thus this brings growth slowness and long-term stagnation. In addition, progress in ageing decreases saving rate, consequently low saving rate brings about the decrease of country-wide investment resources. This ageing problem which is progressive rapidly needs core competence and implementation of human resource professionals to overcome this kind of environment change. First of all, it needs turnover in thinking way toward talents. Secondly, we need innovation one team to pursue innovation and creativity. Thirdly, it should be considered in a new way with the number of workers and efficiency of personnel expenses. Fourthly, employees should make effort for self-advancement. Under the environment with newly change human resource personnels' function and role should be emphasized to maintain sustainable growth and overcome the change of management environment. Therefore, human resources should be emphasized to become competitive personnel and organization with leading the change master and creating the value of the organization.

• 한국안전학회지
• /
• 제24권5호
• /
• pp.84-91
• /
• 2009

It is well known that Korea has got in an aged-society, and the speed of ageing is remarkably fast that has never seen before in the world. In spite of that, government officers and managers who are in charge of industrial safety seldom have interest in ageing workers, and much less ageing workers for themselves in the industrial fields. In the meanwhile the number of injured aged workers keeps going on and even increasing. Therefore this research was carried out to investigate the characteristics of aged workers on one hand, and to grasp the self-consciousness level of industrial workers on the problem of ageing. Furthermore, to develop countermeasures, opinions and hopes of middle managers in small- and medium-sized enterprises who were in charge of industrial safety and health were collected also. Though the reply rate was not so high as expected, opinions of safety and health managers were somewhat appropriate. They replied that the most urgent counterplan for ageing would be improvements of work environments followed by work assignments based upon personal aptitude. On the other hand, the self-consciousness level of aged workers was lower than middle managers, and they mainly complained of surgical disorders such as musculoskeltal disorders including lower back pains. However, they did not seem to recognize they are getting lose their physical function in maintaining body equilibrium.

• 한국축산식품학회지
• /
• 제34권4호
• /
• pp.403-407
• /
• 2014

Changes in Maillard reaction of pidan white were monitored with $A_{294}$, fluorescence intensity, and browning intensity during pickling in the absence and presence of Chinese black tea extract (Camellia sinensis) at levels of 2% and 5% together with 0.2% $ZnCl_2$ or 0.2% $CaCl_2$ up to 3 wk, followed by ageing for another 3 wk. Browning intensity and $A_{294}$ of pidan white increased with increasing pickling/ageing, while fluorescence intensity decreased during ageing (p<0.05), irrespective of treatments. At wk 6, pidan white treated with 0.2% $ZnCl_2$ and 0.2% $CaCl_2$ showed slightly higher browning intensity, fluorescence intensity and $A_{294}$ than those treated with divalents together with Chinese black tea (p<0.05). Free amino group and sugar contents showed continuous decrease during pickling and ageing irrespective of tea and cations used. However, pidan treated without Chinese black tea extract showed significantly lower free amino group and sugar during the ageing of 6 wk (p<0.05). Thus, Chinese black tea extract had an inhibitory effect on the Maillard reaction during ageing of pidan white.

• The Journal of Asian Finance, Economics and Business
• /
• 제5권4호
• /
• pp.213-223
• /
• 2018

The interest in decrepitude expanded by graying is gradually growing in modern society. Moreover, he concern over decrepitude along with healthy mind and body is increasing. Therefore, there are many concerns and efforts toward physical and mental health. In addition, the interest in and effort for appearance health and value is rising as well as physical and mind health. The middle age is the most stable age based on the economic and social status that had been achieved through the life, but it is the most stressful age due to physical health problem and appearance ageing. There are many advanced studies for self-esteem and life satisfaction in old age by using hair, skin-care, cosmetic, nail-art among beauty related fields but studies on self-esteem and perception of successful ageing through user satisfaction of beauty service is lacking. This study is aiming to verify empirically the positive effect of self-esteem improvement through user satisfaction of beauty service on perception of successful ageing for middle-aged over 50 years old. The study has assumed that the higher middle-aged's satisfaction of beauty service is, the more self-esteem improves and there has a mediated effect to contribute successful ageing.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3398-3405
• /
• 2021

This study observed the effect of neutron irradiation and ageing on the microstructure, hardness, and corrosion resistance of SAV-1 (Al-Mg-Si) alloy. The investigated material was irradiated with neutrons to fluences of 10²¹-10²⁶ n/m² in the WWR-K research reactor and kept in dry storage. Long-term irradiation led to an increase in hardness of the alloy and a deterioration of pitting corrosion resistance. Post-irradiation ageing for 1 h at 100-300 ℃ resulted in a decrease in microhardness of the irradiated SAV-1. The effect of post-irradiation ageing on pitting corrosion was made clear through the formation of Guinier-Preston zones and secondary precipitates in the Al matrix. Ageing at 250 ℃ corresponded to the development of stable microstructure and the highest corrosion resistance for the irradiated samples. Mg₂Si, Si, and needle-shaped β" precipitates were formed in SAV-1 alloy that was irradiated with low fluences. β" and clusters of rod-shaped B-type precipitates were observed in highly irradiated samples. The precipitates were similar to those seen in non-irradiated pseudo-binary Al-Mg₂Si alloys with Si excess.

• 열처리공학회지
• /
• 제7권2호
• /
• pp.96-102
• /
• 1994

The present work was aimed to examine the changes of the shape and particle size distribution(PSD) of ${\delta}^{\prime}$ particles on ageing in Al-Li-(Cu, Zr) alloys which had low density, high specific strength and stiffness, Increasing ageing time and temperature resulted in particles whose aspect ratio tended toward 1. The aspect ratio of ${\delta}^{\prime}$ particles was not dependent upon the ageing temperature and time in Al-Li-Cu alloy but was dependent upon them in Al-Li-Zr alloy. The PSD of ${\delta}^{\prime}$ particles in Al-Li-Zr alloy skewed to the right hand compared with that in Al-Li-Cu alloy, because $Al_3Zr$ phase in Al-Li-Zr alloy formed before ageing promoted the precipitation and growth of ${\delta}^{\prime}$ phase. Therefore, the PSD of the ${\delta}^{\prime}$ particles was found to be affected by the presence of $Al_3Zr$ particles. The growth rate of ${\delta}^{\prime}$ phase was not affected by the existence of the third transition phase $T_1$ formed by the addition of Cu in Al-Li alloy but was affected by the existence of $Al_3Zr$ formed by the addition of Zr in Al-Li alloy.