• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.49-52
• /
• 2002

Degradation characteristics of cathodoluminescence (CL) of ZnS:Ag,Cl phosphor were investigated with measurements of CL and photoluminescence (PL). Phosphoric acid treatment was performed to phosphor particles in order to improve CL degradation of phosphor screen that occurred during panel sealing process, and we will discuss mechanisms of degradation and improvement of luminescence mainly with help of AES (auger electron spectroscopy) analysis.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.739-744
• /
• 2009

The filter has long been used in purification processes for indoor air quality. To determine the deodorization effect of several filter materials in a full-scale air-handling system, the present study has been carried out using a wind tunnel equipped with a heat exchanger and various filter materials, such as commercial fabric, activated carbon(AC) and silver nano-particles attached to activated carbon(Ag-AC). The experiment was conducted using an odor substance with ammonia, acetaldehyde, acetic acid. The results obtained indicate that odor substance is substantially decreased on the moisture condensation on the surface of the heat exchanger. The fabric filter has no effect for removal of odor substances. The deodorization efficiency is found to be approximately 7% in the AC filter, while the deodorization efficiency is increased up to 10% using the Ag-AC filter.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2000년도 Proceedings of 5th International Joint Symposium on Microeletronics and Packaging
• /
• pp.112-117
• /
• 2000

Nd:YAG laser of 355nm wavelength, which amounts to 3.5eV, produced by a harmonic generator was used to create Ag metallic particles as seeds for nucleation in photosensitive glass containing Ag+ and Ce3+. The pulse widths and frequency of the laser were 8ns and 10Hz, respectively. For crystalline growth, heat-treatment following laser irradiation was carried out at $570^{\circ}C$ fur 1h. Then, the LiAlSi3O8. crystal phase appeared in the laser irradiated lithium aluminum silicate glass. We present the effect of laser-induced nucleation compared with spontaneous nucleation by heat treatment for crystallization in the glass.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.275-278
• /
• 2002

Conductive adhesives are commonly used for the interconnections of fine pitch, small packages like mobile applications. Since conductive particles connect mechanically with contact pads to give somewhat higher contact resistance, a metallurgical interconnection, which provides both fine pitch and low resistance, was studied using silver ball and indium which can be made at low temperatures. The connection resistance of the In-Ag metallurgical interconnection was lower than that of the Ni/Au-Ag mechanical interconnection and the former showed little dependency on the bonding load in contrast to the latter.

• Bulletin of the Korean Chemical Society
• /
• 제34권1호
• /
• pp.231-236
• /
• 2013

Some cytotoxicity studies for the interpretation of the interaction between nanoparticles and cells are non-mechanistic and time-consuming. Therefore, non-biological screening methods, which are faster and simpler than in-vivo and in-vitro methods, are required as alternatives to current cytotoxicity tests. Here, we proposed a simple screening method for the analysis of the interaction between several AgNPs (bare-, citrate-, and polyvinylpyrrolidone-coating) and dye-containing vesicles acting as a biomimetic cell-membrane. The interaction between AgNPs and vesicles could be evaluated readily by UV-vis spectra. Absorbance deviation in UV-vis spectra revealed a large attraction between neighboring particles and vesicles. This was confirmed by (Derjagin, Landau, Verwey, and Overbeek) theory and DMF (dark-field microscopy) analysis. This proposed method might be useful for analyzing the cytotoxicity of nanoparticles with cell-membranes instead of in vitro or in vivo cytotoxicity tests.

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3957-3961
• /
• 2022

Deposition behaviors of Sr and Cs in various liquid cathodes, such as Zn, Bi, Cd, and Pb, were examined to evaluate their recovery from LiCl-KCl eutectic salt. Cations in the salt were deposited on the liquid cathode, exhibiting potential of -1.8 to -2.1 V (vs. Ag/AgCl). Zn cathode had successful deposition of Sr and exhibited the highest recovery efficiency, up to 55%. Meanwhile, the other liquid cathodes showed low current efficiencies, below 18%, indicating LiCl-KCl salt decomposition. Sr was recovered from the Zn cathode as irregular rectangular SrZn₁₃ particles. A negligible amount of Cs was deposited on the entire liquid cathode, indicating that Cs was hardly deposited on liquid cathodes. Based on these results, we propose that liquid Zn cathode can be used for cleaning Sr in LiCl-KCl salt.

• 공업화학
• /
• 제16권3호
• /
• pp.385-390
• /
• 2005

본 연구에서는 seed sol 부가법을 통해 나노 사이즈의 콜로이달 Ag를 제조하였다. 제조된 콜로이달 Ag 용액은 hybridizer system과 spray nozzle을 통하여 제지용 무기안료 표면에 분사한 후 이산화티탄으로 표면개질하여 기능성 항균 복합 분체를 제조하였다. 나노 사이즈의 콜로이달 Ag 제조에 있어 $AgNO_3$의 첨가와 시간의 경과에 따라 흡수도가 커지는 것으로 단위 중량당 입자의 크기가 커짐을 확인할 수 있었다. 제조된 기능성 무기안료의 항균성 측정은 균들의 해당 균주에서 시간이 증가함에 따라 균의 성장이 억제되는 결과를 나타내었고 항균접종 실험 실시 후 5~7 h 안에 항균성이 발현되면서 일정한 시간 범위 내에서의 항균력이 우수한 것으로 측정되었다. 또한 $TiO_2$의 광촉매 효과 측정 결과 benzene의 광분해 효율실험에서 반응시간 80 min 동안 60~70% 정도의 효율을 보였고, 반응시간 30 min 정도에서 이미 달성한 분해효율이 90% 이상에 도달해 있음을 알 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제28권8호
• /
• pp.531-538
• /
• 2015

This study examined the size and shape of the nano-silver particle through the analysis of electrical resistance when synthesizing nano-sized silver by using the chemical liquid reduction. Changes in particle behaviors formed according to the changes in electronic characteristics by electric resistance in each time period in the beginning of reduction reaction in a course of synthesizing the nano-silver particle formation were studied. In addition, analysis was conducted on particle behaviors according to the changes in concentration of $AgNO_3$ and in temperature at the time of reduction and nucleation and growth course when synthesizing the particles based on the particle behaviors were also examined. As the concentration of $AgNO_3$ increased, the same amount of resistance of approximately $5{\Omega}$ was increased in terms of initial electronic resistance. Furthermore, according to the result of formation of nuclear growth graph and estimation of slope based on estimated resistance, slops of $6.25{\times}10^{-3}$, $2.89{\times}10^{-3}$, and $1.85{\times}10^{-3}$ were derived from the concentrations of 0.01 M, 0.05 M, and 0.1 M, respectively. As the concentration of $AgNO_3$ increased, the more it was dominantly influenced by the nuclear growth areas in the initial phase of reduction leading to increase the size and cohesion of particles. At the time of reduction of nano-silver particle, the increases of initial resistance were $4{\Omega}$, $4.2{\Omega}$, $5{\Omega}$, and $5.3{\Omega}$, respectively as the temperature increased. As the temperature was increased into $23^{\circ}C$, $40^{\circ}C$, $60^{\circ}C$, and $80^{\circ}C$, slopes were formed as $4.54{\times}10^{-3}$, $4.65{\times}10^{-3}$, $5.13{\times}10^{-3}$, and $5.42{\times}10^{-3}$ respectively. As the temperature increased, the particles became minute due to the increase of nuclear growth area in the particle in initial period of reduction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.62-64
• /
• 2005

Indium Tim Oxide(ITO) thin film was prepared for TOLEDs by Facing Targets Sputtering(FTS) apparatus which can suppress the damage of organic layer due to the collisions of high energetic particles. In particular, ITO thin film was prepared with changing the distance between two targets for reduced the bombardment by high energetic particles such as ${\gamma}-electron$ or negative oxygen ions. The electrical and optical properties of ITO thin films as a function of distance of between two targets were measured. Additionally, the ITO thin films were prepared on the cell (cell : MgAg/LiF/EML/HTL/ bottom electrode) with distance of between two targets. And the I-V characteristics of ITO/cell was investigated.

• 한국표면공학회지
• /
• 제41권4호
• /
• pp.169-173
• /
• 2008

The objective of this study is to coat the $SiO_2$ layer uniformly on the ZnS:Cu phosphors by using Sol-Gel method. From results of SEM micrographs observation, XRD and XPS analysis, it could be confirmed that $SiO_2$ layer was relatively well coated on ZnS:Cu particles. $Ag_2S$ was used as a decoding chemical to analyze the dense and uniform coating performance of $SiO_2$ layer on phosphor particles. It could be concluded that phosphors synthesized from our two step replacement method showed strong blue peak comparing to other method and rather weak green peak also. Obtained particle size of phosphors were about 20m diameter. Luminescence properties of the phosphors were examined by photoluminescence spectra at the excitation wavelength of 270 nm.