• 방사성폐기물학회지
• /
• 제9권1호
• /
• pp.33-40
• /
• 2011

[ $Ag_2O$ ] 첨가한 압축 벤토나이트에 대하여 관통 확산법으로 요오드 이온의 이동 특성을 관찰하였다. $Ag_2O$를 첨가하지 않은 압축 벤토나이트와 마찬가지로 $Ag_2O$를 첨가한 압축 벤토나이트에서도 요오드 이온은 확산에 의하여 이동하는데, $Ag_2O$를 첨가한 압축 벤토나이트는 $Ag_2O$를 첨가하지 않은 압축 벤토나이트에 비하여 요오드 이온의 초기 누출 시간이 지연되는 것으로 나타났다. $Ag_2O$를 첨가한 압축 벤토나이트에서 요오드 이온의 초기 누출 시간 지연은 확산 용액으로 순수 요오드 이온 수용액을 사용하였을 때 뿐만 아니라 0.1 M NaCl-요오드 이온 수용액을 사용하였을 때에도 관찰되었다. 또한 $Ag_2O$를 첨가한 압축 벤토나이트의 겉보기 확산 계수는 $Ag_2O$를 첨가하지 않은 압축 벤토나이트의 겉보기 확산 계수보다 낮은 값을 나타내었다. $Ag_2O$를 첨가하지 않은 압축 벤토나이트의 유효 확산 계수는 기존 문헌에 보고된 값과 거의 일치하는 결과를 얻었으며, $Ag_2O$를 첨가한 압축 벤토나이트에서 요오드 이온의 유효 확산 계수는 $Ag_2O$ 첨가에 따라 대체적으로 감소하는 경향을 나타내었다.

• 한국세라믹학회지
• /
• 제36권5호
• /
• pp.490-496
• /
• 1999

The sintering behavior of LTCC (low temperature cofired ceramics) chip couplers was investigated in relation with Ag diffusion at the interface of glass ceramic substrate-Ag electrode. Sintering temperature was in the range of 825$^{\circ}C$-975$^{\circ}C$. The commercial green sheet and silver electrode were used. Below 875$^{\circ}C$ the diffusion of the Ag ion into the substrate and the penetration of glassy phases into the electrode occurred due to an increase of fluidity. Thus the lectrode line was severely deformed and damaged. At 975$^{\circ}C$ the transformation of crystalline phases into glassy phases and the melting of the Ag electrode resulted in the diffusion of the considerable amount of Ag ions.

• 대한금속재료학회지
• /
• 제47권8호
• /
• pp.461-465
• /
• 2009

We study the diffusion of Ag based bimetallic nanoclusters supported on graphite. Using a molecular dynamics simulation, we reveal that the Ag clusters show rapid diffusion because of their hexagonal bottom layer. In order to decrease the rate of diffusion, we added Pt and Ni to distort the structure of the alloy cluster (i.e., the alloying method). We expected Pt to provide a stronger force on Ag atoms, and Ni to shorten the bond length and thereby change the structure of Ag cluster. However, the attempt was unsuccessful, because Pt and Ni atoms formed cores inside the Ag clusters. We therefore designed a collision system where large Ag clusters collide with small Pt or Ni clusters. Upon collision with Pt clusters, the diffusion showed little change, because Pt atoms are substituted at the Ag atomic site and form a perfectly ordered structure. The collision with Ni, however, deforms the bottom layer as well as the overall cluster structure and decreases diffusion. This outcome appoints toward the possibility of further application to the manufacture of durable nanocatalysts.

• 한국표면공학회지
• /
• 제35권2호
• /
• pp.107-112
• /
• 2002

We have studied diffusion behavior of NiFe/Ag bilayer deposited by on silicon Ion Beam Sputtering methods. The diffusion behavior of NiFe and Ag in NiFe/Ag thin film is analyzed by Medium Energy Ion Scattering Spectroscopy. For samples without Ta underlayer, silicides such as Ni-Si or Fe-Si were formed at Si substrate and NiFe interface. In contrast, Ag predominantly diffused into the NiFe layer probably through their grain boundaries for Ta underlayered samples.

• 전기화학회지
• /
• 제2권2호
• /
• pp.93-97
• /
• 1999

유해성 유기물을 효과적으로 분해시키는데 이용되는 Ag(II)이온에 의한 전기화학적 매개산화 공정의 한계전류밀도를 예측하기 위하여 질산전해질의 농도, Ag(I) 이온의 농도 및 온도변화에 따른 Ag(I)/Ag(II) 이온쌍의 cyclic voltammogram을 백금전극에서 얻었으며, 피크전류로부터 Ag(I) 이온의 확산계수를 구하였다. Ag(I)/Ag(II) 이온쌍의 산화환원 반응은 물 분해 반응에 의해 크게 영향을 받았으며 백그라운드 보정을 통하여 정확한 피크전류를 측정할 수 있었다. Ag(I) 이온의 확산계수를 질산용액의 점도 및 온도의 함수로 나타냄으로써 전기화학적 매개산화공정의 한계전류밀도를 용이하게 예측할 수 있는 실험식을 제시하였다.

• 전자공학회논문지D
• /
• 제35D권1호
• /
• pp.84-93
• /
• 1998

Planar graded index optical waveguides have been formed by Ag$^{+}$ ion exchange in the BK7 optical glass. The experimental results of diffusion and modal characteristics of Ag$^{+}$-Na$^{+}$ exchanged BK7 glass waveguides are presented. Measurements of the mode indices have been measured. We found the relations between the process and device parameters such as the diffusion depth and the square root of the diffusion time, diffusion coefficient and diffusion temperature, and diffusion ion concentration and surface index change. A theoretical gaussian function refractive index profile matched best with the measured data for all the guided modes. The empirical relations between the process and the device parameters are derived and subsequently used to formulate a systematic procedure for fabricating singlemode and multimode waveguides.uides.

• 한국세라믹학회지
• /
• 제36권6호
• /
• pp.583-589
• /
• 1999

In the fabrication of ceramic chip couples for high frequency application such as the mobile communication equipment the formation of electrode lines and Ag diffusion were investigated with heat treatment conditions for removing organic binders. The deformation and densification of the electrode line greatly depended on the binder burnout process due to the overlapped temperature zone near 400$^{\circ}C$ of the binder dissociation and the solid phase sintering of the silver electrode. Ag ions were diffused into the glass ceramic substrate. The Ag diffusion was led by the glassy phase containing Pb ions rather than by the crystalline phase containing Ca ions. The fact suggests that the Ag diffusion could be controlled by managing the composition of the glass ceramic substrate.

• Nuclear Engineering and Technology
• /
• 제47권5호
• /
• pp.608-616
• /
• 2015

The migration of silver (Ag) in silicon carbide (SiC) and $^{110m}Ag$ through SiC of irradiated tristructural isotropic (TRISO) fuel has been studied for the past three to four decades. However, there is no satisfactory explanation for the transport mechanism of Ag in SiC. In this work, the diffusion coefficients of Ag measured and/or estimated in previous studies were reviewed, and then pre-exponential factors and activation energies from the previous experiments were evaluated using Arrhenius equation. The activation energy is $247.4kJ{\cdot}mol^{-1}$ from Ag paste experiments between two SiC layers produced using fluidized-bed chemical vapor deposition (FBCVD), $125.3kJ{\cdot}mol^{-1}$ from integral release experiments (annealing of irradiated TRISO fuel), $121.8kJ{\cdot}mol^{-1}$ from fractional Ag release during irradiation of TRISO fuel in high flux reactor (HFR), and $274.8kJ{\cdot}mol^{-1}$ from Ag ion implantation experiments, respectively. The activation energy from ion implantation experiments is greater than that from Ag paste, fractional release and integral release, and the activation energy from Ag paste experiments is approximately two times greater than that from integral release experiments and fractional Ag release during the irradiation of TRISO fuel in HFR. The pre-exponential factors are also very different depending on the experimental methods and estimation. From a comparison of the pre-exponential factors and activation energies, it can be analogized that the diffusion mechanism of Ag using ion implantation experiment is different from other experiments, such as a Ag paste experiment, integral release experiments, and heating experiments after irradiating TRISO fuel in HFR. However, the results of this work do not support the long held assumption that Ag release from FBCVD-SiC, used for the coating layer in TRISO fuel, is dominated by grain boundary diffusion. In order to understand in detail the transport mechanism of Ag through the coating layer, FBCVD-SiC in TRISO fuel, a microstructural change caused by neutron irradiation during operation has to be fully considered.

• 한국진공학회지
• /
• 제5권2호
• /
• pp.147-155
• /
• 1996

Optical properties of $TiO_2/M/Ag/M/TiO_2$ films have been changed with the diffusion barrier metal M. Optimum opticla properties of $TiO_2/M/Ag/M/TiO_2$ as the transparent heat mirror film, could be obtained with Ti among diffusion barrier metals of Ti, Cu, Zr and Al. $TiO_2/M/Ag/M/TiO_2$ film, which was fabricated by sputtering of 18 nm-thick $TiO_2$ and Ag, and 4nm-thick Ti, showed maximum transimittance of 89% at visible wavelength and infrared reflectance of 97% at wavelength of 3000 nm. Optical properties of this film was not degraded by Xenon-sunshine weather test for 240 hours. For specimens with barrier layers of Cu, Zr, and Al, degradation of optical properties by weather test was increased in a sequence of films with Cu, Zr, and Al barrier layers.

• 한국세라믹학회지
• /
• 제27권6호
• /
• pp.763-768
• /
• 1990

The gradient and depth of tin at the side of glasses by float process were measured. The effects of tin to ion exchanged of glasses in the molten salt of KNO3 and AgNO3 were presented by means of Ag+ ion penetration depth, diffusion coefficient variation, spectral transmittance and color coordinates. The diffusion coefficient of Ag+ ion of tin side was higher than air side, and the activation energy of tin side was 0.2-0.6Kcal/mole lower than air side. Therefore Ag+ ion penetration depth of tin side is 2-10$\mu\textrm{m}$ deeper, hence it can be seen that tin promote Ag+ ion diffusion. The same treatment of ion exchange, reddish-brown oflong wavelength in case of tin present, yellowish-amber of short wavelength in case of tin absence were revealed.