• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
• /
• pp.151-155
• /
• 2003

The requirements for harsh environment electronic controllers in automotive applications have been steadily becoming more and more stringent. Electronic substrate technologists have been responding to this challenge effectively in an effort to meet the performance, reliability and cost requirements. An effect of the plasma cleaning at the alumina substrate and the IMC layer between $Sn-37wt\%Pb$ solder and Ag-Pd thick film conductor after reflow soldering has been studied. Organic residual carbon layer was removed by the substrate plasma cleaning. So the interfacial adhesive strength was enhanced. As a result of AFM measurement, Ag-Pd conductor pad roughness were increased from 304nm to 330nm. $Cu_6Sn_5$ formed during initial ref]ow process at the interface between TiWN/Cu UBM and solder grew by the succeeding reflow process so the grains had a large diameter and dense interval. A cellular-shaped $Ag_3Sn$ was observed at the interface between Ag-Pd conductor pad and solder. The diameters of the $Ag_3Sn$ grains ranged from about $0.1\~0.6{\mu}m$. And a needle-shaped $Ag_3Sn$ was also observed at the inside of the solder.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 추계기술심포지움논문집
• /
• pp.169-172
• /
• 2002

Silver pastes for inner conductor in the Low Temperature Co-fired Ceramics (LTCC) are composed of silver powder, binder, solvent and additives. The composition of the chemicals have influence on rheology, printability, shrinkage rate, etc. In this study, commercial Ag pastes and Ag pastes made in KETI were investigated to find the relationship between characteristics of Ag paste and solid contents. Ag pastes with 68~90 wt% Solid Contents were tested. Substrate/paste matching property and conductivity of the conductor lines showed large dependence on solid contents of Ag paste.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 추계총회,초청강연,특별강연,연구발표회
• /
• pp.132.1-132
• /
• 2000

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.519-522
• /
• 2002

Ag (silver) can be used for YBa$_2$Cu$_3$O$\_$7-$\delta$/(YBCO) coated conductor tape as the substrate on which YBCO can be deposited directly because of the chemical compatibility of Ag with YBCO. We have fabricated rolled Ag tapes with various total reduction ratios and different thicknesses. As-rolled Ag tape was recrystallized at 750$^{\circ}C$ for 30min in air and vacuum of 10$\^$-3/ torr. The orientation distribution functions (ODF) calculated from three x-ray pole figures of as-rolled and recrystallized tapes were analysed. As the total reduction ratio increased from 94 to 98%, the development of {110}texture of as-rolled Ag improved. Under the present experimental condition, maximum {110}ODF value of Ag tape was obtained for the sample with 94% total reduction ratio which was recrystallized at 750$^{\circ}C$ for 30min in vacuum of 10$\^$-3/ torr.

• 한국전기전자재료학회논문지
• /
• 제30권1호
• /
• pp.32-36
• /
• 2017

The Ag thin film of YBCO (yttrium barium copper oxide) CC (coated conductor) protect the YBCO layer and, at the same time, affects the electrical characteristics of the YBCO CC. Therefore, YBCO CC with the commercialization of the Ag thin film layers makes it easy to establish a process, it can lead to a variety of characteristic changes in YBCO CC. In this paper, plasma surface treatment was carried out to facilitate the deposition of the Ag thin film and the deposition process of YBCO CC. Surface roughness from the test results was increased as the time of the plasma surface treatment increased from 5 to 20 minutes. On the other hand, the surface roughness was decreased for the time of the plasma surface treatment over 20 minutes. Furthermore, after depositing, the increasing of deposit amount and reduced lifting phenomenon showed a similar tendency with the rise time of surface roughness.

• 마이크로전자및패키징학회지
• /
• 제11권1호
• /
• pp.1-6
• /
• 2004

자동차 전장품의 시험환경 조건이 엄격해짐에 따라, 전장품 개발 기술자들은 이에 부합하는 성능, 신뢰성, 비용 등을 고려한 보다 효과적인 제품 설계를 위해 노력하고 있다. 본 논문에서는 ECM 알루미나 기판의 플라즈마 세척 영향과 리플로우 후 Sn-37wt%Pb 솔더와 패드 접합부 계면에서 형성되는 금속간 화합물을 관찰하였다. 기판의 플라즈마 세척은 계면 접착력을 저해하였던 C에 의한 유기 잔류물 층이 제거되어 계면 접착력을 향상시키는 효과가 있다. 또한 AFM 분석 결과 도체 패드의 표면 거칠기는 304 nm에서 330 m로 증가하였다. 리플로우 과정에서 솔더와 TiWN/Cu 패드 계면에서 형성된 $Cu_6/Sn_5$는 리플로우 횟수가 증가할 수록 결정립의 크기도 조대화되었다. 솔더와 Ag-Pd 도체패드 계면에서는 세포질 형태의 $Ag_3Sn$화합물이 관찰되었다. $Ag_3Sn$은 지름이 약 0.1∼0.6 $\mu\textrm{m}$이며, 솔더 내부에서는 침상 모양도 관찰되었다.

• 한국결정성장학회지
• /
• 제30권3호
• /
• pp.83-90
• /
• 2020

열전도성이 우수한 AlN 기판에 형성되는 Ag계 후막도체의 접착강도에 미치는 기판 표면조도 및 소결 온도의 영향을 연구하였다. 표면조도(R_a)가 0.5인 AlN 기판을 사용하여 제조한 후막도체의 접착강도가 이보다 표면조도가 크거나 또는 작은 기판을 사용하여 제조한 후막도체의 경우보다 높게 나타났다. 표면조도가 0.5보다 작은 기판의 경우 Ag 후막도체와 기판 사이의 접촉면적이 표면조도가 0.5인 기판보다 상대적으로 작아 접착강도가 작게 나타났다. 한편, 표면조도가 0.5보다 큰 기판을 사용한 경우에는 도체막이 기판에 완전히 접착되지 못하는 현상이 나타났고, 이로 인해서 접착강도가 적게 나타남을 알 수 있었다. 또한, 850℃에서 소결하여 얻어진 Ag계 후막도체 막의 표면 평활도가 다른 소결 온도에서 소결하여 얻어진 도체막의 평활도에 비해 가장 우수하였고, 이로 인해 도체막의 접착강도가 가장 높게 나타남을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 초전도 자성체
• /
• pp.46-49
• /
• 2002

The aim of this paper is to investigate the influence of various deformation ratio on texture of Ag tapes that can be used as a RE-$Ba_2Cu_3O_{7-{\delta}}$ coated conductor tapes without any buffer layer. We fabricated as-rolled Ag substrate with various deformation ratio per step. Thickness and total deformation ratio of Ag tapes were $100{\mu}m$ and >98%, respectively. And as-rolled Ag substrate was annealed at $750^{\circ}C$ for 30min. The as-rolled and recrystallization textures were measured using x-ray pole figures and orientation distribution function (ODF) analysis. With the increase of rolling ratio from 5 to 20%, deformation texture are changed from {1l0}<311> to {1l0}<112>, {032}<100>, {051}<211>. After recrystallization by annealing, main texture was observed to {013}<100> under present condition.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1554-1556
• /
• 2000

Normal zone propagation(NZP) characteristics were investigated on Ag sheathed multi filamentary Bi-2223 tape and cylindrical stacking conductor. The critical current($I_c$) of Ag sheathed Bi-2223 tape and cylindrical stacking conductor were 12 A, 63 A at 77 K, 0 T. Normal zone propagation(NZP) experiments with tape were conducted with refrigerator in temperature from 45 K to 77 K, 0 T. Cylindrical stacking conductor was molding with epoxy and experiments were conducted with adiabatic condition in $LN_2$. NZP velocities of tape with two condition of DC and AC were almost same at each temperature. Temperature ($T_1$) of tape with distance of 0.5 cm from heater was strongly climbed up to 95K and slowly decreased. NZP velocities of cylindrical stacking conductor were 1.9-2.4 cm/sec in $LN_2$.

• 한국전기전자재료학회논문지
• /
• 제24권3호
• /
• pp.200-207
• /
• 2011

Abstract: The effect of lead free glass frit compositions on the properties of thick film conductor and resistor pastes were investigated. Two types lead free frits, HBF-A(without $Bi_2O_3$) and HBF-B(with $Bi_2O_3$) were made from $SiO_2$, $B_2O_3$, $Al_2O_3$, CaO, MgO, $Na_2O$, $K_2O$, ZnO, MnO, $ZrO_2$, $Bi_2O_3$. And Ag based conductor pastes and $RuO_2$ based resistor paste were prepared by mixed with these frits and functional phase(Ag and $RuO_2$), and organic vehicle. The properties of thick film conductor and resistor sintered at $850^{\circ}C$ were studied after printing on $Al_2O_3$ substrate. The morphology of the sintered films surface were SEM and EDS were carried out to analysis the chemical composition on resistor surface and state of Ru atom in frit matrix.