• 열처리공학회지
• /
• 제13권5호
• /
• pp.303-308
• /
• 2000

The ring gears of automobile parts are manufactured generally process chart of which is as follows : forging ${\rightarrow}$ annealing or normalizing ${\rightarrow}$ rough machining ${\rightarrow}$ hardening(Quenching-Tempering or carburizing process) ${\rightarrow}$ finish machining. Isothermal annealing process after forging is most effective in the side of improvment of machinability. On this study we selected two kinds of steel;SCM415, SCM435 of most universal and investigated microstructures to find out most suitable condition of heat treatment in proportion continuous cooling and isothermal annealing. As the cooling rate is $5^{\circ}C$ per minute in continuous cooling process, martensite and bainite are coexisted with ferrite and pearlite in SCM435 steel. If the cooling rate is slower than $5^{\circ}C$ per minute, microstructure were only ferrite and pearlite but formation of band structure can't be avoid. On the other hand, microstructure is only ferrite and pearlite regardless of cooling rate because carbon content of SCM415 steel is low. Moreover formation of band structure isn't exposed by faster cooling rate. Most optimal temperature of the isothermal annealing is from $650^{\circ}C$ to $680^{\circ}C$ in SCM435 steel. When holding time is 60 minute with $650^{\circ}C$, the identical ferrite and pearlite microstructures can be obtained.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.13-20
• /
• 2010

본 연구의 목적은 Display 산업의 중요성에 주목하여 옥외 광고를 위한 LCD 패널용 콘솔(이하 'LCD 콘솔'이라 한다.)을 개발하는데 있다. 본 연구의 핵심 과제는 LCD 콘솔의 내부온도를 제어할 수 있도록 해주는 냉각시스템(Cooling System)을 개발하는 것이다. 냉각시스템은 상용화되어 있는 냉각휀(Cooling Fan), 히트싱크(Heat sinks), 열전소자(Thermo Electronic Module) 등의 제품들을 시스템적으로 통합시키는 응용기술로서 통계적 검정기법을 적용하여 개발되었다. 본 연구는 먼저 냉각시스템을 설계/제작한 후 실험을 통하여 냉각시스템 제어에 필요한 인자들의 설정 값들을 구하는 과정을 보였다. 이어서 개발된 냉각시스템을 이용하여 46인치 LCD Panel이 탑재된 LCD 콘솔을 설계/제작하고 실험을 통하여 완성품 LCD 콘솔의 성능을 확인하는 과정을 보였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1111-1116
• /
• 2008

The purpose of this study is to maintain high efficiency and reasonable use of cold-heat storage systems operated the showcase. An experimental study is carried out to manufacture the showcase system in a laboratory. Comparing the result at general operation condition with that at the new condition using ice storage system, this study showed the effects of the refrigerant sub-cooling, and with using inverter. At the condition using ice storage system, the ice making process was operated during midnight being not needed the cooling of the showcase through the continuous running of the condenser unit. And then, the refrigerant was sub-cooled using stored cold-heat after being discharged from the air cooling condenser during the day time. The cooling performance was increased owing to the sub-cooling of refrigerant during day time, hence the running time of the compressor was effectively decreased. In other words, this study showed that power consumption during daytime can be transferred to the midnight for making use of the refrigerant sub-cooling.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.189-192
• /
• 2008

태양광 발전은 일사량이 높을수록 발전량이 증가된다. 그러나 일사량이 높아짐에 따라 셀의 온도도 같이 증가해 발전 효율은 감소하게 된다. 냉각시스템의 설치는 이러한 문제점을 해결하기 위한 적절한 방법이 될 수 있으나 냉각시스템 설치 후 태양광 발전량의 증가량, 냉각시스템의 설치비용, 냉각시스템의 유지 보수비용 등 실용화에 필요한 내용은 논의되고 있지 않다. 따라서 본 논문에서는 냉각시스템의 효과 및 상용화 가능성에 대해 기술하였다.

• 한국식품과학회지
• /
• 제11권2호
• /
• pp.86-92
• /
• 1979

시판(市販) 식용대두유(食用大豆油)에 항산화제(抗酸化劑) BHA, BHT, PG를 200 ppm씩 첨가(添加)하여 $150{\pm}2^{\circ}C$에서 30분간(分間) 가열(加熱)한 후 23.5시간(時間) 방냉(放冷)하는 조작(操作)을 6회(回) 반복(反復)하였다. 그리고 이 반복과정(反復過程)에 따르는 항산화제(抗酸化劑)의 잔존율(殘存率)의 변화(變化)와 기질(基質)의 일부(一部) 물리적(物理的), 화학적성질(化學的性質)의 변화(變化)를 조사(調査)하였다. 그 결과(結果)는 아래와 같다. 1. 반복가열조작(反復加熱操作)의 회수(回數)에 따르는 항산화제(抗酸化劑)의 잔존율(殘存率)은 2회(回 )의 경우 BHA 60.5%, BHT 55.7%, PG 40.5%로써 PG는 초기농도(初期濃度)의 1/2이상(以上)이 손실(損失)되었다. 한편, 6회(回)의 경우, BHA 5.7%, BHT 3.0%, PG 1.8%로써 첨가(添加)된 항산화제(抗酸化劑)의 거의 전부(全部)가 손실(損失)되었다. 2. 반복가열조작(反復加熱操作)에 따르는 control을 포함하는 모든 기질(基質)의 굴절율(屈折率), 점도(粘度)의 변화(變化)는 초기(初期)에는 그 증가(增加)가 원만했으나 4회이후(回以後)에는 모두 급격(急激)히 증가(增加)했다. 한편 color index는 초기(初期)에는 급격(急激)히 증가(增加)했으나 2회이후(回以後)에 는 그 증가속도(增加速度)는 상당(相當)히 감소(減少)되었다. 3. 또한 항산화제(抗酸化劑)의 잔존율(殘存率)이 감소(減少)함에 따라 기질(基質)에 대한 각항산화제(各抗酸化劑)의 산패억제작용(酸敗抑制作用)도 급격(急激)히 저하(低下)되었다. 즉, 6회(回) 반복가열(反復加熱)후에는 각항산화제(各抗酸化劑)가 첨가(添加)되었든 기질(基質)들의 과산화물가(過酸化物價), TBA가(價), 산가(酸價)는 control의 그것과 별차(差)가 없었다.

• 한국버섯학회지
• /
• 제20권3호
• /
• pp.138-146
• /
• 2022

표고 수확후 적정 예냉조건을 구명하기 위해 차압예냉방법으로 2수준 (0℃에서 30분, 0℃에서 1시간), 저온실 냉각으로 3수준 (-3℃에서 1일, 0℃에서 1일, 3℃에서 1일)을 비교하여 냉각 후 랩 (PVC) 포장하여 저온 (1℃)에 6주간 보관하면서 품질 특성 및 상품성률을 조사하여 신선 표고의 유통수명을 연장할 수 있는 가장 효과적인 예냉방법을 구명하고자 하였다. 대조구로 예냉처리하지 않은 무처리를 두었다. 신선 표고의 예냉 후 저온저장시 상품성에 영향을 미치는 품질 요인은 변색과 부패 발생이었고, 이취는 6주간 저장 동안 발생하지 않거나 약하게 발생하여 상품성에 영향을 미치지 않았다. 모든 처리구에서 상품율 100%를 나타내는 저장 기한은 3주까지였다. 저온저장 5주째 표고의 상품율은 0℃ 저온실냉각처리구, 차압예냉 1시간 처리구, 무처리구에서 상품율 100% 였으며, 차압예냉 30분처리구는 80%, -3℃ 저온실 냉각처리구는 86.7% 였다. 예냉 후 1℃ 저온저장 6주째에는 0℃ 저온실 냉각처리구에서 80%, 3℃ 저온실 냉각처리구는 66.7%, 차압예냉 1시간 처리구는 46.7%, 그 외 처리구는 33% 이하의 상품율을 보였다. 따라서 표고를 6주간 보관 시 가장 적합한 예냉방법은 수확 직후 0℃ 저온실에 적재 후 강제통풍예냉을 1일간 실시하는 방법이었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.251-256
• /
• 2001

Deformation analysis of injection molded articles whose geometry is considered as the assembly of the thin flat plates has been conducted. For the in-mold analysis, thermo-viscoelastic stress calculation of rheologically simple amorphous polymer and in-mold deformation calculation considering the in-plane mold constraint has been done. Free volume theory has been used for the non-equilibrium density state by the fast cooling. At ejection, the redistribution of stress together with instantaneous deformation has been considered. During out-of-mold cooling after ejection, thermoelastic model based on the effective temperature has been adopted for the calculation of deformation. Two typical mold geometries are used to test the numerical simulation.

• 한국수소및신에너지학회논문집
• /
• 제32권3호
• /
• pp.189-195
• /
• 2021

A compressed hydrogen tank is to be repressurized to 40 bar by being connected to a high-pressure line containing hydrogen at 50 bar and 25℃. Hydrogen filling time and the corresponding hydrogen temperature has been estimated when the filling process stopped according to several thermodynamic models. During the process of cooling the hydrogen tank, hydrogen temperature and pressure vs. time estimation was performed using Aspen Dynamics. Filling time, hydrogen temperature after filling hydrogen gas, cooling time and the final tank pressure after tank filling process have been completed according to the thermodynamic models are almost same.

• 대한기계학회논문집B
• /
• 제28권12호
• /
• pp.1484-1493
• /
• 2004

In this study, it induced to a conclusion below by experiment consideration to regarding an effective supercooling ends method of the flow cooling water in a tube of continuous ice making method and the static cooling water in a tube of continuous ice making method which used magneticfluid in a dynamic type ice storage system. Continuous ice making in a tube of the flow cooling water was shortened about 12 minutes until supercooling ends that case which gave vertical eccentricity rotation magnetic field 120rpm than did not provide magnetic field by experimental result that was tested to supercooling ends effect from shape control of magneticfluid. Continuous ice making method in a tube of the static cooling water compared with and reviewed the case that was not provided with the magnetic field and exposed cooling surface instantaneously by magnetic field. It confirmed that supercooling degree $\Delta$ $T_{c}$, $\Delta$ $T_{s}$, and $\Delta$ $T_{w}$ became lower because of heat transfering increasing by the occurrence of natural convection between after cooling starting progress time 1∼3 minutes if it did not give a magnetic field, and peformed the supercooling ends when natural convection occurred confirmed that refrigerating capacity was better. That relation $\Delta$ $T_{c}$, and $t_{e}$/($\Delta$ $T_{c}$-$\Delta$ $T_{s}$) after convection occurred, was not depended on $T_{b}$ and initial temperature if the depth of water and thickness of magneticfluid were regular and it was possible to verify conjecture of tp from $\Delta$ $T_{s}$ and $\Delta$ $T_{c}$.lar and it was possible to verify conjecture of tp from $\Delta$ $T_{s}$ and $\Delta$ $T_{c}$.c}$.>.

• 대한물리치료과학회지
• /
• 제2권3호
• /
• pp.577-586
• /
• 1995

This paper was the study of a change in the body temperature of each region(Oral cavity, Axillary, Cubital, Popliteal, Inguinal region)and by time after appling hot(Hot Pack, Infra Red) and cold (Ice Pack, Cooling Pack) to lumbar region. The statistical measures were sampled through 16 senior students in dept. of Physiothrapy, Kim Cheun College and the period for this was from July 13, 1995 to July 20, 1995. There was an increse in the temperature of distal portion besides application area after hot application. The increse in the body temperature according to applied agents and time showed significance statistically(p<0.01, p<0.05). There was just a decrease in the temperature of distal portions besides application area after appling Ice Pack. Furthermore there was an increase in the body temperature after appling Cooling Towel. Therefore, during cold application the appling agents and time did not showed any significance statistically.