• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.236-241
• /
• 2009

After analyzing the characteristics of the cooling dryer, the mixed cooling dryer was developed by adding the desiccant dryer which supplement the cooling dryer's demerits. Also, the hybrid desiccant cooling dryer was developed to use effectively the exhaust heat energy of the cooling dryer. It could make a more that 20 percent reduction in energy compared with the mixed desiccant cooling dryer. It has become essential to supply this equipment and search the suitable drying product.

• International journal of advanced smart convergence
• /
• 제9권2호
• /
• pp.123-128
• /
• 2020

We constructed a cooling system for solar cells using convection phenomena and investigated its cooling performance. The cooling system didn't need any driving power or water resources. The convection cooler manufactured with a right-triangle shape of an air duct was attached to the rear of the solar cell to confirm that cooling was performed using convection phenomena. When the ratio of duct width to attachment surface width was 3:7, and the ratio of entrance height and exit height of duct was 5:1, it showed the best cooling performance. Comparative experiments with solar cells without convection cooler showed that cooling effects from 16.5℃ to 20.9℃ occurred after 40 minutes exposed to the 1300W Xenon lamp condition.

• 한국산림과학회지
• /
• 제104권4호
• /
• pp.558-563
• /
• 2015

'미풍' 밤의 수확 후 전처리 방법(수냉식 예냉, 수냉식 예냉+오존, 수냉식 예냉+마이크로버블, 수냉식 예냉+오존+마이크로버블)이 저장 중 품질에 미치는 영향을 조사하였다. 밤 과실의 품질변화는 세척 처리보다 수냉식 예냉처리의 효과가 더 크게 나타났다. 하지만 부패율과 미생물 수에서는 처리구간 차이가 확연히 나타났다. 부패율은 저장 12주 후 무처리구가 20.0%로 가장 높았고 수냉식 예냉+오존 처리구와 수냉식 예냉+오존+마이크로버블 처리구가 3.3%로 가장 낮게 나타났다. 미생물 수는 세척처리 직후 무처리구(4.4 log CFU/g) > 수냉식 예냉 처리구(4.0 log CFU/g) > 수냉식 예냉+오존+마이크로버블 처리구(3.5 log CFU/g) > 수냉식 예냉+오존 처리구(3.4 log CFU/g) > 수냉식 예냉+마이클로버블 처리구(3.3 log CFU/g)순으로 차이가 나타났으며 저장 12주 후에는 4.7-5.9 log CFU/g 범위 내에서 증가하였다. 따라서 '미풍' 밤의 세척처리는 밤 과실의 부패를 경감시킴으로써 밤의 품질유지에 효과적이였고, 특히 오존처리가 밤 과실의 품질유지와 저장성에 가장 효과적이라고 판단된다.

• 한국잠사곤충학회지
• /
• 제13권2호
• /
• pp.109-117
• /
• 1971

년간 누에의 다회육을 하는 경우 어떠한 잠종을 어떻게 처리하여서 여기에 응할 수 있겠는가 하는 시험을 6월 상순부터 9월상순까지 매일 매일마다 처리한 잠종에 대하여 조사한 결과 다음과 같은 결과를 얻었다. 1) 6월 상, 중순에 사육한 잠종은 복식냉장법과 단식냉장법과에서 차이가 없었으나, 6월 하순용 잠종은 복식냉장법이 양호하였다. 2) 7월 중순용 잠종은 즉침산냉장법이 양호하였다. 3) 7월 하순용 잠종은 즉침산냉장법이 양호하였으나 단기인공처리법에서는 재검토를 요한다. 4) 8월 하순용 잠종은 단기인공처리법으로서는 더욱 검토하여야 하고 또한 다른 방법을 강구하여야 하겠다. 5) 8월 중순용 잠종은 냉침법이 양호하나, 단기인공처리법도 가능성이 있어 앞으로 검토를 요한다. 6) 9월 상순용은 종래와 같은 냉침법이 양호하고, 또 냉침법은 앞으로 검토를 요한다.

• Journal of Mechanical Science and Technology
• /
• 제16권5호
• /
• pp.647-654
• /
• 2002

This study deals with the characteristic of quenching refrigerant for heat treatment deformation control of SM45C steel. Heat-treatment deformation must be controlled for the progress of production parts for landing gear. Most of deformation is occurred on inconsistent cooling. The inconsistent cooling is caused by a property of quenching refrigerant. When a heated metal is deposited in the quenching refrigerant, the cooling speed is so slow in early period of cooling because of a steam-curtain. After additional cooling, the steam-curtain is destroyed. In this progress, the cooling speed is very fast. The object of this study is to control the deformation of heat-treatment for landing gear by improving the conditions of quenching. The cooling curves and cooling rates of water, oil and polymer solution are obtained and illustrated. From the characteristics of the quenching refrigerant, the effects of heat-treatments on thermal deformation and fatigue strength are also investigated.

• 한국전기전자재료학회논문지
• /
• 제11권4호
• /
• pp.327-333
• /
• 1998

The influence of slow cooling and annealing time in $O_2$in MPEG process on $J_c$ was investigated. From the measurement of $J_c$,SEM and XRD, it was observed that the critical current density was related with the slow cooling time and annealing time in $O_2$. The value of $J_c$ was the highest at slow cooling time of 40 hour. And also, the value of $J_c$ along the annealing time in $O_2$in the case of the slow cooling time of 40 hours was inclined to increase with annealing time. Consequently, it can be suggested that proper slow cooling time and annealing time after slow cooling in MPMG process be important to improve the critical characteristics.

• 반도체디스플레이기술학회지
• /
• 제16권3호
• /
• pp.106-110
• /
• 2017

Due to the plasma applied from the outside, which acts as an etchant during the etching process, considerable heat is transferred to the wafer and a separate cooling process is performed to effectively remove the heat after the process. In this case, a direct cooling method using a refrigerant is suitable for cooling through effective heat exchange. The direct cooling method using the refrigerant using the latent heat exchange is superior to the cooling method using the sensible heat exchange. Therefore, in this paper, AMESim is used to design a direct refrigerant cooling system using latent heat exchange simulator was built.The constructed simulator is reliable compared with the actual experimental results. It is expected that this simulator will help to design and search for optimal process conditions.

• 한국재료학회지
• /
• 제34권1호
• /
• pp.44-54
• /
• 2024

High-Manganese (Mn) austenitic steel, with over 24 wt% Mn content, offers outstanding mechanical properties in cryogenic settings, making it a potential replacement for existing cryogenic materials. This high manganese steel exhibits high strength, ductility, and wear resistance, making it promising for applications like LNG tanks, flanges, and valves. To operate in cryogenic environments, hot forging and heat treatment processes are vital, especially in flange production. The cooling rate during high-temperature cooling after hot forging plays a critical role in influencing the microstructure and mechanical properties of high manganese steel. The rate at which cooling occurs during this process influences the size of the grains and the distribution of manganese and consequently has an impact on mechanical properties. This study assessed the microstructure and mechanical properties based on different cooling rates during the hot forging of High-Mn steel flanges. Comparing air and water cooling after hot forging, followed by heat treatment, revealed notable differences in grain size. These differences directly impacted mechanical properties such as tensile strength, hardness, and Charpy impact property. Understanding these effects is crucial for optimizing the performance and reliability of High-Mn steel in cryogenic applications.

• 한국유체기계학회 논문집
• /
• 제17권6호
• /
• pp.84-88
• /
• 2014

A long term passive cooling system is considered as the most important safety feature for the nuclear design after the Fukushima Daiichi nuclear power plant accident in 2011. The conventional active pump driven safety systems are not available during a station Black Out (SBO) accident. The current design requirement on cooling time of the Passive Auxiliarly Feedwater System (PAFS) is about 8 hours only. To meet the 72 hours cooling time, the pool capacity of cooling water tank should be increased as much as 3~4 times larger than that of current water cooling tank. In order to extend the cooling time for 72 hours, a new passive air-water combined cooling system is proposed. This paper provides the feasibility of the combined passive air-water cooling system. The current pool capacity of water cooling system is preserved, and the cooling capability is extended by an additional air cooler.

• 동아시아식생활학회지
• /
• 제24권1호
• /
• pp.62-69
• /
• 2014

Jungkwa is a traditional Korean dessert preserved in honey or sucrose. This study was carried out to investigate the antioxidant activities and quality characteristics of Rehmannia glutinosa Jungkwa (RJ). RJ was prepared after six repeated cycles of boiling-cooling. After blanching fresh Rehmannia glutinosa (600 g) for 5 min at $100^{\circ}C$, Rehmannia glutinosa was boiled in sucrose syrup (sucrose 720 g in water 600 g) for 60 min and then cooled for 24 hr. Moisture, pH and color values of lightness, redness and yellowness in the Hunter color system of Jungkwa decreased as the number of boiling-cooling cycles increased, whereas acidity, $^{\circ}Brix$ and reducing sugar contents of syrup increased. Total phenol content increased in by the 6th boiling-cooling cycle. Antioxidant activities, including DPPH and hydroxyl radical scavenging activities, increased in RJ by the 6th boiling-cooling cycle. Based on these results, the antioxidant activities of Rehmannia radix Jungkwa was improved according to an increasing number of boiling-cooling cycles due to increased total phenol contents.