• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.236-241
• /
• 2009

After analyzing the characteristics of the cooling dryer, the mixed cooling dryer was developed by adding the desiccant dryer which supplement the cooling dryer's demerits. Also, the hybrid desiccant cooling dryer was developed to use effectively the exhaust heat energy of the cooling dryer. It could make a more that 20 percent reduction in energy compared with the mixed desiccant cooling dryer. It has become essential to supply this equipment and search the suitable drying product.

• International journal of advanced smart convergence
• /
• v.9 no.2
• /
• pp.123-128
• /
• 2020

We constructed a cooling system for solar cells using convection phenomena and investigated its cooling performance. The cooling system didn't need any driving power or water resources. The convection cooler manufactured with a right-triangle shape of an air duct was attached to the rear of the solar cell to confirm that cooling was performed using convection phenomena. When the ratio of duct width to attachment surface width was 3:7, and the ratio of entrance height and exit height of duct was 5:1, it showed the best cooling performance. Comparative experiments with solar cells without convection cooler showed that cooling effects from 16.5℃ to 20.9℃ occurred after 40 minutes exposed to the 1300W Xenon lamp condition.

• Journal of Korean Society of Forest Science
• /
• v.104 no.4
• /
• pp.558-563
• /
• 2015

The effects of pre-treatment methods (water cooling, water cooling+ozone, precooling+microbubble, water cooling+ozone+microbubble) after harvest on the quality of 'Mipung' chestnut were studied. Changes in quality of chestnut were greater precooling treatments effect than washing treatments. But, decaying rate and total microorganism were significantly differences among treatments. The decaying rate after 12 weeks storage was highest at 20.0% in non-treatments and lowest at 3.3% in water cooling+ozone and water cooling+ozone+microbubble treatments. The total microorganism immediately after washing treatments was in the order non-treatments (4.4 log CFU/g) > water cooling treatments (4.0 log CFU/g) > water cooling+ozone+microbubble treatments (3.5 log CFU/g) > water cooling+ozone treatments (3.4 log CFU/g) > water cooling+microbubble treatments (3.3 log CFU/g), and after 12 weeks storage was increased within 4.7 to 5.9 log CFU/g. Thus, the washing treatments, especially ozone treatments, extended the shelf-life of the 'Mipung' chestnut by inhibiting the decaying.

• Journal of Sericultural and Entomological Science
• /
• v.13 no.2
• /
• pp.109-117
• /
• 1971

Today most of farmers rear the silkworms two time a year, spring and autumn (Fig. 1). But from now on, we can rear whenever mulberry tree is grown, and it is expected that we can rear many times (Fig.2). Because the silkworm eggs can not always be hatched, we have to study a special method for rearing many times a year. The writer, in these problems, hatched the silkworm eggs from the beginning of June to the beingning of September, once every 10 days, and reard 10 times. The results are as follows; 1) The silkworm eggs for the beginning and middle of June have no difference between the double cooling method and the single cooling method. But the eggs for the end of June in the double cooling method is better. 2) For the silkworm eggs for the middle of July, the cooling method after acid treatment for eggs is better. 3) For the silkworm eggs for the end of July, the reeling method after acid treatment is better. But it is needed to study the short artificial treatment. 4) For the eggs for the beginning of August, the further study of the short artificial treatment is also needed. 5) For the eggs for the middle of August, after cooling treatment is better. The short artificial treatment is possible for them. But further study is needed. 6) For the eggs for the beginning of September, after cooling treatment is needed for further study.

• Journal of Mechanical Science and Technology
• /
• v.16 no.5
• /
• pp.647-654
• /
• 2002

This study deals with the characteristic of quenching refrigerant for heat treatment deformation control of SM45C steel. Heat-treatment deformation must be controlled for the progress of production parts for landing gear. Most of deformation is occurred on inconsistent cooling. The inconsistent cooling is caused by a property of quenching refrigerant. When a heated metal is deposited in the quenching refrigerant, the cooling speed is so slow in early period of cooling because of a steam-curtain. After additional cooling, the steam-curtain is destroyed. In this progress, the cooling speed is very fast. The object of this study is to control the deformation of heat-treatment for landing gear by improving the conditions of quenching. The cooling curves and cooling rates of water, oil and polymer solution are obtained and illustrated. From the characteristics of the quenching refrigerant, the effects of heat-treatments on thermal deformation and fatigue strength are also investigated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.4
• /
• pp.327-333
• /
• 1998

The influence of slow cooling and annealing time in $O_2$in MPEG process on $J_c$ was investigated. From the measurement of $J_c$,SEM and XRD, it was observed that the critical current density was related with the slow cooling time and annealing time in $O_2$. The value of $J_c$ was the highest at slow cooling time of 40 hour. And also, the value of $J_c$ along the annealing time in $O_2$in the case of the slow cooling time of 40 hours was inclined to increase with annealing time. Consequently, it can be suggested that proper slow cooling time and annealing time after slow cooling in MPMG process be important to improve the critical characteristics.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.3
• /
• pp.106-110
• /
• 2017

Due to the plasma applied from the outside, which acts as an etchant during the etching process, considerable heat is transferred to the wafer and a separate cooling process is performed to effectively remove the heat after the process. In this case, a direct cooling method using a refrigerant is suitable for cooling through effective heat exchange. The direct cooling method using the refrigerant using the latent heat exchange is superior to the cooling method using the sensible heat exchange. Therefore, in this paper, AMESim is used to design a direct refrigerant cooling system using latent heat exchange simulator was built.The constructed simulator is reliable compared with the actual experimental results. It is expected that this simulator will help to design and search for optimal process conditions.

• Korean Journal of Materials Research
• /
• v.34 no.1
• /
• pp.44-54
• /
• 2024

High-Manganese (Mn) austenitic steel, with over 24 wt% Mn content, offers outstanding mechanical properties in cryogenic settings, making it a potential replacement for existing cryogenic materials. This high manganese steel exhibits high strength, ductility, and wear resistance, making it promising for applications like LNG tanks, flanges, and valves. To operate in cryogenic environments, hot forging and heat treatment processes are vital, especially in flange production. The cooling rate during high-temperature cooling after hot forging plays a critical role in influencing the microstructure and mechanical properties of high manganese steel. The rate at which cooling occurs during this process influences the size of the grains and the distribution of manganese and consequently has an impact on mechanical properties. This study assessed the microstructure and mechanical properties based on different cooling rates during the hot forging of High-Mn steel flanges. Comparing air and water cooling after hot forging, followed by heat treatment, revealed notable differences in grain size. These differences directly impacted mechanical properties such as tensile strength, hardness, and Charpy impact property. Understanding these effects is crucial for optimizing the performance and reliability of High-Mn steel in cryogenic applications.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.6
• /
• pp.84-88
• /
• 2014

A long term passive cooling system is considered as the most important safety feature for the nuclear design after the Fukushima Daiichi nuclear power plant accident in 2011. The conventional active pump driven safety systems are not available during a station Black Out (SBO) accident. The current design requirement on cooling time of the Passive Auxiliarly Feedwater System (PAFS) is about 8 hours only. To meet the 72 hours cooling time, the pool capacity of cooling water tank should be increased as much as 3~4 times larger than that of current water cooling tank. In order to extend the cooling time for 72 hours, a new passive air-water combined cooling system is proposed. This paper provides the feasibility of the combined passive air-water cooling system. The current pool capacity of water cooling system is preserved, and the cooling capability is extended by an additional air cooler.

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.1
• /
• pp.62-69
• /
• 2014

Jungkwa is a traditional Korean dessert preserved in honey or sucrose. This study was carried out to investigate the antioxidant activities and quality characteristics of Rehmannia glutinosa Jungkwa (RJ). RJ was prepared after six repeated cycles of boiling-cooling. After blanching fresh Rehmannia glutinosa (600 g) for 5 min at $100^{\circ}C$, Rehmannia glutinosa was boiled in sucrose syrup (sucrose 720 g in water 600 g) for 60 min and then cooled for 24 hr. Moisture, pH and color values of lightness, redness and yellowness in the Hunter color system of Jungkwa decreased as the number of boiling-cooling cycles increased, whereas acidity, $^{\circ}Brix$ and reducing sugar contents of syrup increased. Total phenol content increased in by the 6th boiling-cooling cycle. Antioxidant activities, including DPPH and hydroxyl radical scavenging activities, increased in RJ by the 6th boiling-cooling cycle. Based on these results, the antioxidant activities of Rehmannia radix Jungkwa was improved according to an increasing number of boiling-cooling cycles due to increased total phenol contents.