• 제목/요약/키워드: Affect Intensity

검색결과 542건 처리시간 0.032초

Effect of $Mg^{2+}$ co-doping on luminescent properties of $ZnGa_2O_4:Mn^{2+}$

  • Singh, Binod Kumar;Bartwal, Kunwar Singh;Ryu, Ho-Jin
    • 반도체디스플레이기술학회지
    • /
    • 제6권4호
    • /
    • pp.29-32
    • /
    • 2007
  • Zinc gallate, $ZnGa_2O_4:Mn^{2+}$ co-doped with different concentrations of $Mg^{2+}$ (0.001- 0.5 mol%) was prepared by solid state synthesis method. These compositions were investigated for their photoluminescence and cathodoluminescence properties. The optimized composition $Zn_{0.990}Mg_{0.005}Ga_2O_4:Mn_{0.005}$ shows higher luminescence intensity compared to the parent phosphor. The intense green emission peak was found at 504 nm. The $Mg^{2+}$ doping does not affect much the decay time. It remains <10 ms for these compositions which make them potential candidate for application in TV screens.

  • PDF

연안해역의 환경변화에 따른 저차 생태계 Pulsing Simulation 예비 진단 (Preliminary Diagnosis for Pulsing Simulation of Low Trophic Ecosystem by Environmental Changes in Coastal Area)

  • 이대인
    • 환경영향평가
    • /
    • 제21권3호
    • /
    • pp.461-468
    • /
    • 2012
  • In general, long-term changes of ecological factors take a pulse form in which they interact with other factors and go through a repeated increasing and decreasing cycle. The coupling of the two approaches the grid model and the box model in ecological modeling can lead to an in-depth understanding of the environment. The study analyzes temporal variations of major storages with an energy system model that formulizes effectively the relationships among nutrients, phytoplankton, and zooplankton in the Yellow Sea and the East China Sea. An increase of light intensity and standing stock of nutrient increase the magnitude and frequency of pulsing. Also, an immense reduction of nutrient concentration can cause extinction of the pulsing and bring about a steady state. It is concluded that the nutrient loads in freshwater discharge from the Yangtze affect the cycles of major ecological components as well as water quality variables and play an important role in the marine ecosystem.

밭경사에 따른 강우유출수 내의 비점오염물질 특성 비교 분석 (A study on Compare Characteristics of Nonpoint Source in Storm-water versus Steepness of Field Slope)

  • 김기철;최용훈;원철희;최중대
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2009년도 학술발표회 초록집
    • /
    • pp.1093-1102
    • /
    • 2009
  • This study was focused on analyse Nonpoint source characteristics from Flat slope field and Steep slope field. We performed Storm-water monitering for obtain flow data and concentration data. Totally, eleven times Event was occurred. We calculated EMC(Event Mean Concentration) and Pollutants Loads using data we obtained. As a result, steep slope field has more discharge than flat field. SS value, one of the water quality contents, has largest variation and T-N has least variation. There is runoff differences even though events has same rainfall. We assume that not only amount of Rainfall, but also Rainfall Duration Times, Intensity, Number of Previous Non-precipitation days can affect to Run-off.

  • PDF

직접수치해법을 이용한 난류 예혼합 화염전파속도 연구 (Roles of Displacement Speed of Premixed Flame Embedded in Isotropic Turbulent Decaying Flow)

  • 한인석;허강열
    • 한국연소학회지
    • /
    • 제12권2호
    • /
    • pp.10-19
    • /
    • 2007
  • Flame surface area is a critical parameter determining turbulent flame speed. Three-dimensional direct numerical simulations(DNS) were conducted to figure out the evolution process of flame surface area. Fully compressible Navier-Stokes equations are solved to reproduce premixed flame embedded in isotropic decaying turbulent flow. The tangential straining and curvature of propagating surface affect development of flame area. In this study, four different turbulent intensity flows and three different Le number flames are investigated to force changes in straining and curvature effects. Consistent results are obtained for the probability density functions (PDF) of strain and curvature with previous researches. It is revealed that displacement speed, which is a speed of flame surface relative to unburnt flow, controls the balance between sink and source of flame surface area.

  • PDF

과학기술지식 생산과 공유를 위한 협력 유형분류체계 (A typology of Collaboration Modes for Scientific and Technological Knowledge Production and Sharing)

  • 황금주
    • 지식경영연구
    • /
    • 제11권2호
    • /
    • pp.133-152
    • /
    • 2010
  • This paper suggests a typology of the modes of collaboration for scientific and technological knowledge production and sharing (STKPS) based on knowledge communication types, including organizational factors, communication channel, intensity, and decision-making, that affect STKPS processes. It is mainly designed to rearrange ideas about collaboration drawn from the literature in order to develop a conceptual framework for categorizing modes of collaboration based on how communication patterns shape four modes of collaboration. In the conclusion and discussion part, practical implications, limitations of this study, and further studies are discussed. In particular, the practical implications propose communication patterns suitable for five stages of collaboration processes. As the collaboration initiation or set-up stage is critical, extensive face-to-face communication is recommended in the auditing stage. In the execution stage, media-based communication can be actively utilized, because collaborators will mostly exchange explicit codified knowledge supported by IT. The evaluation and reinforcement stages concentrate on tacit knowledge exchange and explicit knowledge evaluation, which requires intensive face-to-face communication including negotiations for evaluating collaboration outcomes and partnership.

  • PDF

풍속과 풍향이 미세먼지농도에 미치는 영향 (Effect on the PM10 Concentration by Wind Velocity and Wind Direction)

  • 채희정
    • 환경위생공학
    • /
    • 제24권3호
    • /
    • pp.37-54
    • /
    • 2009
  • The study has analyzed impacts and intensity of weather that affect $PM_{10}$ concentration based on PM10 forecast conducted by the city of Seoul in order to identify ways to improve the accuracy of PM10 forecast. Variables that influence $PM_{10}$ concentration include not only velocity and direction of the wind and rainfalls, but also those including secondary particulate matter, which were identified to greatly influence the concentration in complicated manner as well. In addition, same variables were found to have different impacts depending on seasons and conditions of other variables. The study found out that improving accuracy of $PM_{10}$ concentration forecast face some limits as it is greatly influenced by the weather. As an estimation, this study assumed that basic research units and artificially estimated pollutant emissions, study on mechanisms of secondary particulate matter productions, observatory compliment, and enhanced forecaster's expertise are needed for better forecast.

자성 박막에서 여기되는 스핀파 거동 (Behavior of Spin Waves Excited in Magnetic Thin Film)

  • 한기평;손영준;백문철;조경익
    • 한국자기학회지
    • /
    • 제10권2호
    • /
    • pp.86-92
    • /
    • 2000
  • 자성 박막 표면에서의 일축 자기이방성을 고려한 자화의 경계조건을 Maxwell 방정식과 자화에 대한 Gilbert 방정식을 동시에 만족하는 해에 적용하여 자성박막에서 여기되는 스핀파 공명신호에 대한 모의실험을 수행하였다. 공명신호에 영향을 주는 물리량은 박막두께, 교환강성 상수, 표면 자기이방성 상수, 포화자화, 감쇠 상수, 전기비저항 등이며, 이러한 물리량들이 자성 박막에서 여기되는 스핀파 거동에 미치는 영향을 공명흡수선의 공명자기장, 선폭, 세기로 구분하여 조사하였다.

  • PDF

관내 입자 재응집에 의한 케이크 저항의 감소 (Reduction of Cake Resistance by Floc Reaggregation in a Membrane-Feed-Pipe)

  • 김태영;박희경
    • 상하수도학회지
    • /
    • 제21권6호
    • /
    • pp.717-726
    • /
    • 2007
  • Fully-grown flocs in a mixing tank of membrane filtration with dead-end membrane are ruptured while passing through a pump and the ruptured flocs are aggregated again in a Membrane-Feed-Pipe (MFP). To look at more details, this study tries to relate the reaggregation to a parameter of mixing intensity in MFP, i.e., G-value. The G-value is a function of Reynolds number, pipe diameter, friction factor and average velocity in MFP. To deal with polydispersity condition, we develop a representative particle size called in this study EDPD (Effective Diameter for Polydispersity condition in Dead-end filtration). The experimental results show that as the G-value increases, the EDPD decreases and also the cake resistance increases. Through comparison between EDPD and cake resistance, these results show that cake resistances are controlled by reaggregation phenomenon in MFP. The effect of detention time in MFP, however, does not affect the reaggregation of the broken flocs as G-values are increased.

Solar Cells Characteristics Tester

  • Jirawath, Parnklang;Amnard, Jenjirodpipat;Santi, Hanklar
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2000년도 제15차 학술회의논문집
    • /
    • pp.511-511
    • /
    • 2000
  • The equipment is used for testing the electrical characteristics of solar cells that were connected to be a solar panel, which can be found anywhere of solar power plant. This device was built from power switch devices f3r sinking the high current of the solar panel. The processor is a controller, which controls the quantity of the current, which flow through the switching devices and collect the characteristic of the solar panel. The tester can measure the current, voltage, temperature, and light intensity, which are main factors that affect the electrical characteristics of solar cells. 12 bits resolution signal converter is used to change the measuring levels so we can change measuring levels to 4096 levels, and these data are stored in tile memory. The equipment can also calculate the maximum power of the solar system panel.

  • PDF

전자회절을 이용한 격자상수의 측정 정확도 향상 (Accuracy Improvement of Lattice Parameters Measured from Electron Diffraction Data)

  • 이상길;송경;김진규
    • Applied Microscopy
    • /
    • 제41권1호
    • /
    • pp.75-79
    • /
    • 2011
  • For quantitative analysis of nano-crystal structure, we reported the accuracy improvement method of lattice parameters measured from electron diffraction. For calculation of Au lattice parameters used as a standard crystal structure, it was considered two different acquisition methods (detector and enegy-filter) and three different calculation methods (conventional, least-square and regression fit). As a result, the measurement reliability could be enhanced by using CCD camera which gives higher performance, while energy-filtering did not affect the improvement the camera constant accuracy. Also, the accuracy of lattice parameters could be improved up to $10^{-4}$ order by regression fitting with correction formula. Finally, it is expected that the combination of regression fitting and intensity extraction from energy-filtered precession electron diffraction gives a solution of quantitative structure analysis for unknown nano-crystals.