• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.2
• /
• pp.162-165
• /
• 2011

In this paper, $CuInSe_2$ thin film was prepared by use of the co-evaporation method with the variation of the substrate temperature in the range of $100^{\circ}C$ to $400^{\circ}C$. The film was annealed at $300^{\circ}C$ for an hour in a vacuum chamber at $3{\times}10-4$ Pa. After annealing, the thin film prepared at the substrate temperatures of $100^{\circ}C$ and $200^{\circ}C$ was observed. The XRD (x-ray diffraction) pattern of sample prepared at $100^{\circ}C$ showed the single phase formation of $CuInSe_2$. However, at $200^{\circ}C$, there was no apparent difference in the XRD pattern except a variation in the intensity of the peak. As the annealing treatment of substrate improved the crystal structure of the film, it affected to the increase of an electron mobility, resulted in an increase in conductivity and a decrease in resistance. As a results, when the substrate temperature was at $200^{\circ}C$ and $300^{\circ}C$, the sheet resistance was 1.534 $\Omega/\Box$ and 1.554 $\Omega/\Box$, respectively, and the resistivity was $1.76{\times}10-6\;{\Omega}{\cdot}cm$ and $1.7210-6\;{\Omega}{\cdot}cm$, respectively. From the absorption spectrum measurements, there was no variation between the before and after annealing conductions. And it means that the annealing step does not affect the thickness of the thin film.

• Atmosphere
• /
• v.19 no.3
• /
• pp.227-235
• /
• 2009

Global climate warming induced by long-lived greenhouse gases is expected to cause increases in wildfire frequencies and intensity in boreal forest regions of mid- and high-latitudes in the future. Siberian forest fires are one of important sources for air pollutants such as ozone and aerosols over East Asia. Thus an accurate quantification of forest fire influences on air quality is crucial, in particular considering its higher occurrences expected under the future warming climate conditions. We here use the 3-D global chemical transport model (GEOS-Chem) with the satellite constrained fire emissions to quantify Siberian fire effects on ozone concentrations in East Asia. Our focus is mainly on spring 2003 when the largest fires occurred over Siberia in the past decade. We first evaluated the model by comparing to the EANET observations. The model reproduced observed ozone concentrations in spring 2003 with the high $R^2$ of 0.77 but slightly underestimated by 20%. Enhancements in seasonal mean ozone concentrations were estimated from the difference in simulations with and without Siberian fires and amounted up to 24 ppbv over Siberia. Effects of Siberian fires also resulted in 3-10 ppbv incresases in Korea and Japan. These increases account for about 5-15% of the ozone air quality standard of 60 ppbv in Korea, indicating a significant effect of Siberian fires on ozone concentrations. We found however that possible changes in regional meteorology due to Siberian fires may also affect air quality. Further study on the interaction between regional air quality and meteorology is necessary in the future.

• Journal of Korea Water Resources Association
• /
• v.33 no.5
• /
• pp.603-610
• /
• 2000

Climate factors such as rainfall, temperature, wind, humidity, and solar radiant heat affect soil erosion. Among those factors, rainfall influences soil erosion to the most extent. The kinetic energy of rainfall breaks away soil particles and the water flow caused by the rainfall entrains and transport them downstream. In order to estimate soil erosion, therefore, it is important to determine the rainfall erosivity. In this study, the annual average Rainfall Erosivity(R) in Korea, an important factor of the Universal Soil Loss Equation(USLE) and Revised Equation(RUSLE), has been estimated using the nationwide rainfall data from 1973 to 1996. For this estimation, hourly rainfall data at 53 meterological stations managed by the Meterological Agency was used. It has been found from this study that the newly computed values for R are slightly larger than the existing ones. It would be because this study is based on the range of rainfall data that is longer in period and denser in the number of gauging stations than what the existing result used. The final result of this study is shown in the form the isoerodent map of Korea.

• Geomechanics and Engineering
• /
• v.16 no.1
• /
• pp.21-34
• /
• 2018

Discontinuities considerably affect the mechanical and hydraulic properties of rock mass. These properties of the rock mass are influenced by the geometry of the discontinuities to a great extent. This paper aims to render an account of the geometrical parameters of several discontinuity sets related to the surrounding rock mass of Rudbar Lorestan Pumped Storage Power Plant powerhouse cavern making use of the linear and areal (circular and rectangular) sampling methods. Taking into consideration quite a large quantity of scanline and the window samplings used in this research, it was realized that the areal sampling methods are more time consuming and cost-effective than the linear methods. Having corrected the biases of the geometrical properties of the discontinuities, density (areal and volumetric) as well as the linear, areal and volumetric intensity accompanied by the other properties related to four sets of discontinuities were computed. There is an acceptable difference among the mean trace lengths measured using two linear and areal methods for the two joint sets. A 3D discrete fracture network generation code (3DFAM) has been developed to model the fracture network based on the mapped data. The code has been validated on the basis of numerous geometrical characteristics computed by use of the linear, areal sampling methods and volumetric method. Results of the linear sampling method have significant variations. So, the areal and volumetric methods are more efficient than the linear method and they are more appropriate for validation of 3D DFN (Discrete Fracture Network) codes.

• Journal of Navigation and Port Research
• /
• v.41 no.3
• /
• pp.103-108
• /
• 2017

This paper analyzed the distribution characteristics of incidents of high seas watches and warnings using data from 2010 to 2014. High seas watches and warnings are critical to the vessels and marine operators of the region, etc. because they affect the ability to safely maneuver. High seas often appear at the southern and middle regions of the East Sea and the eastern region of the South Sea. This phenomenon is closely connected to an extratropical cyclone's development and migration, as well as monsoon intensity. They occur primarily in winter(December ~ January) and spring(March ~ April). The statistical analysis of monthly high seas watches and warnings in both inshore and offshore areas shows a strong positive correlation.

• Corrosion Science and Technology
• /
• v.6 no.3
• /
• pp.103-111
• /
• 2007

The effect of stress factors on the growing process of stress corrosion cracking (SCC) of the sensitized 18-8 stainless steel in high temperature water was investigated using equations of crack growth rate derived from applying electric circuits to SCC corrosion paths. Three kinds of cross sections have to be considered when electric circuit is constructed using total current. The first is ion flow passage area, $S_{sol}$, of solution in crack, the second is total dissolving surface area, $S_{dis}$, of metal on electrode of crack tip and the third is dissolving cross section, $S_{met}$, of metal on grain boundary or in base metal or in welding metal. Stress may affect each area. $S_{sol}$ may depend on applied stress, $\sigma_{\infty}$, related with crack depth. $S_{dis}$ is expressed using a factor of $\varepsilon(K)$ and may depend on stress intensity factor, K only. SCC crack growth rate is ordinarily estimated using a variable of K only as stress factor. However it may be expected that SCC crack growth rate depends on both applied stress $\sigma_{\infty}$ and K or both crack depth and K from this consideration.$\varepsilon(K)$ is expressed as ${\varepsilon}(K)=h_2{\cdot}K^2+h_3{\cdot}K^3$ when $h_{2}$ and $h_{3}$ are coefficients. Also, relationships between SCC crack growth rate, da/dt and K were simulated and compared with the literature data of JBWR-VIP-04, NRC NUREG-0313 Rev.2 and SKIFS Draft. It was pointed out in CT test that the difference of distance between a point of application of force and the end of starter notch (starting point of fatigue crack) may be important to estimate SCC crack growth rate. An anode dissolution current density was quantitatively evaluated using a derived equation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.5
• /
• pp.212-221
• /
• 2010

The bubbles could be created from multiple source in the surface of ocean. The bubbles which are created like this affect to the intensity and the sound speed of acoustic wave which are used from the ocean. From the research, it observed Reverberation from the sea surface, using Vbeam transmission and reception equipment that was a cross-shaped Array, from 2008 July 2nd to July 3rd at 4Km from the East Sea Mookho port. It is difficult to analyze data because the received signal has ambient noise and occurrence ISI(Inter Symbol Interference) for multipath. This paper remove that ambient noise and ISI using the directions of arrival beamforming and the filter and sum beamforming. After beamforming, a following DFE(Decision Feedback Equalizer) removes the remaining multipath components. Experimental results show that the proposed technique reduce the errors caused by ISI.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.2
• /
• pp.234-240
• /
• 2016

We examined the diffusion of contaminants released from the southern coast around Fukushima, Japan, during the passage of typhoons using a three-dimensional numerical model (POM) to track diffusing radioactivity (RA) released from the nuclear power plant at Fukushima following the accident caused by the giant tsunami event in March 2011. Radioactive contaminants released during the passage of typhoons may have significantly affected not only Japanese but also Korean coastal waters. The model domain covered most of the northwestern Pacific including marginal seas such as the East/Japan Sea and the Yellow Sea. Several numerical experiments were conducted case studies focusing on the westward diffusion from the southern coast of Japan of contaminants derived from the source site (Fukushima) according to various attributes of the typhoons, such as intensity, track, etc. The model produced the following results 1) significant amounts of contaminants were transported in a westward direction by easterly winds favorable for generating a coastal air stream along the southern Japanese coast, 2) the contaminants reached as far as Osaka Bay with the passage of typhoons, forced by a 5-day positive sinusoidal form with a (right-) northward track east of Fukushima, and 3) the range of contamination was significant, extending to the interior of the East/Japan Sea around the Tsugaru Strait. The model suggests that contaminants and/or radioactivity released from Fukushima with the passage of typhoons can affect Korean waters including the northeastern East/Japan Sea around the Tsugaru Strait, especially when the typhoon tracks are favorable for generating a westward coastal air stream along the southern Japanese coast.

• 한국해양학회지
• /
• v.28 no.4
• /
• pp.281-291
• /
• 1993

A time-dependent primitive two0dimensional calculation is conducted to investigate the variations of Vol. transport onto the Yellow Sea and the Korea Strait with real bathymetries and to tract the Lagrangian movement of water particles. A series of experiment of the barotropic Kuroshio intrusions shows that the eddy induced branching of Kuroshio has sufficient intensity as to modify the continental shelf circulation. This intrusion seems to be one of the important forcing terms such as winds. tides and buoyancy that can also affect the dynamics in the region of the continental shelf. Transport variations across the shelfbreak due to the branching of Kuroshio which come particularly from the southwest of the Kyushu Island, have a strong relationship with the transport variations across the Korea Strait and in the southern area of the Yellow sea. The particle trajectories of the model results are well agreed with the trajectories of satellite tracking drifters obtained by one of the WOCE/TOGA program except the longer travel time period in the present model.

• Korean journal of food and cookery science
• /
• v.21 no.5
• /
• pp.607-615
• /
• 2005

The purpose of this study was to analyze the characteristics of Chinese foods in main ingredients, sauces, and cooking methods, and to assess the applicability of kochujang in Chinese foods. Twenty Chinese foods and commercial kochujang were selected by a Chinese head cook. The main ingredients were 24 kinds such as pork, chicken, shrimp, bok choy, bean curd, Chinese noodles etc., which were generally used in Korean foods. The main Chinese sauces were 11 kinds, and soy sauce was used in 12 foods, shang loo tau soy sauce in 2, wine in 8, oyster sauce in 7, rice wine in 6. The classification of cooking units in all Chinese foods was performed and the cooking frequency was deep frying>pan frying>boiling>stir frying>steaming>roasting. The proper amount of kochujang (weight ratio) was decided by pre-test of the Chinese head cook and Chinese food added kochujang was assessed by a Chinese focus group. The overall preference of Chinese food added kochujang was assessed highly and was related to the kinds of sauces, and to the kinds of main ingredients. The foods which used soy sauce or shang loa tau soy sauce were preferred. Sweetness by using kochujang wasn't preferred in several foods. Saltiness and aftertaste by using kochujang didn't affect the food preference, and the intensity of color and pungency were evaluated as a moderate level. An increased amount of kochujang would be possible in several foods. However, the increase in the amount of kochujang for intensive color and pungency in Chinese foods was directly related to the increase of sweetness, which had been discussed as the main problem in lowering the preference. Therefore, the screening of various Chinese foods harmonized with kochujang and the determination of the proper mixing ratio with Chinese sauces are very important. The results of this study could be used as basic data for the promotion of kochujang consumption in the Chinese market.