• Journal of Microbiology and Biotechnology
• /
• v.16 no.8
• /
• pp.1240-1247
• /
• 2006

The present study investigated the influence of the aeration rate and agitation intensity on the production of the mycelial biomass and antioxidative exopolysaccharide (EPS) in Ganoderma resinaceum. In submerged cultures with varying agitation speeds and aeration rates in a stirred-tank reactor, the maximum mycelial biomass and maximum EPS concentration were achieved at 50 rpm and 300 rpm, respectively. Under varying aeration rates, the highest amount of mycelial biomass (18.1 g/l) was accumulated at the lowest aeration rate (0.5 vvm) and the maximum EPS production (3.0 g/l) obtained at 1.0 vvm. A compositional analysis revealed that the five different EPSs were protein-bound heteropolysaccharides, consisting of 87.17-89.22% carbohydrates and 10.78-12.83% proteins. The culture conditions had a striking affect on the carbohydrate composition of the EPS, resulting in different antioxidative activities. All the EPSs showed strong scavenging activities against superoxide and 1, 1-diphenyl-2-picrylhydrazyl (DPPH) radicals, whereas no clear trend in antioxidative activity was observed against hydroxyl radicals and lipid peroxides. Although the precise reason for this difference is still unclear, the high glucose moiety of EPS is probably linked to its broad spectrum of antioxidative activity.

• Journal of Korean Physical Therapy Science
• /
• v.7 no.2
• /
• pp.545-558
• /
• 2000

The present study was designed to investigate the effect of low power GaAsAl laser on Fos expression in the spinal cord induced by noxious mechanical stimulation. Noxious mechanical stimulation was applied to the right hind paw following 30min of low power laser treatment using different intensity and treatment point and the resulting Fos expression in the spinal cord dorsal horn was compared to that obtained in rats exposed only to the noxious mechanical stimulation. The results were summarized as follows: 1. In intact control rats, only a few Fos like immunoreactive(Fos-IR) neurons were evident in the lumbar spinal cord dorsal horn. Similarly, following prolonged inhalation anesthesia, Fos-IR neurons were absent in the dorsal horn of the lumbar spinal cord. In animals treated with noxious mechanical stimulation, neurons with nuclei exhibiting Fos immunostaining were distributied mainly in the medial half of ipsilateral laminae I-V at lumbar segments L3-5. These findings directly indicated that prolonged anesthesia used in this study did not affect the Fos expression in the spinal cord dorsal horn of intact animals and noxious mechanical stimulation treated animals. 2. In acupoint treated animals, 10mW of laser stimulation, not 3mW intensity, significantly reduced the number of Fos immunoreactive neurons in the spinal dorsal horn induced by noxious mechanical stimulation(P<.01). However, the supressive effect of low power laser stimulatin was not observed in 3m Wand 10m W of laser stimulation into non-acupoint. These data indicate that 10mW of low power laser stimulation into acupoint is capable of inhibiting the expression of Fos in the dorsal horn induced by noxious mechanical stimulation. In conclusion, these findings raise the possibility that low power laser stimulation into acupoint may be a promising alternative medicine therapy for the mechanical stimulation induced pain in the clinical field.

• Radiation Oncology Journal
• /
• v.37 no.2
• /
• pp.82-90
• /
• 2019

Purpose: To evaluate the results of hypofractionated radiotherapy (HFX) for early glottic cancer. Materials and Methods: Eighty-five patients with cT1-2N0M0 squamous cell carcinoma of the glottis who had undergone HFX, performed using intensity-modulated radiotherapy (IMRT, n = 66) and three-dimensional conformal radiotherapy (3D CRT, n = 19) were analyzed. For all patients, radiotherapy was administered at 60.75 Gy in 27 fractions. Forty-three patients received a simultaneous integrated boost (SIB) of 2.3-2.5 Gy per tumor fraction. Results: The median follow-up duration was 29.9 months (range, 5.5 to 76.5 months). All patients achieved complete remission at a median of 50 days after the end of radiotherapy (range, 14 to 206 days). The 5-year rates for locoregional recurrence-free survival was 88.1%, and the 5-year overall survival rate was 86.2%. T2 stage was a prognostic factor for locoregional recurrence-free survival after radiotherapy (p = 0.002). SIB for the tumor did not affect disease control and survival (p = 0.191 and p = 0.387, respectively). No patients experienced acute or chronic toxicities of ≥grade 3. IMRT significantly decreased the dose administered to the carotid artery as opposed to 3D CRT (V₃₅, p < 0.001; V₅₀, p < 0.001). Conclusions: Patients treated with HFX achieved acceptable locoregional disease control rates and overall survival rates compared with previous HFX studies. A fraction size of 2.25 Gy provided good disease control regardless of SIB administration.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.3
• /
• pp.49-55
• /
• 2015

The rainfall pattern, rainfall intensity as well as topographical conditions used for the analysis of debris flow affect, in general, the magnitude of debris flow and flow velocity, when debris flow occurs. The consideration of topographical conditions implies that the topography is equally divided into grids and the slope of inside the grid is computed as an average, leading to, in turn, obtain the closer results to the reality as the grid is smaller in the case of the severely bended topography. Although the size of grid should be as small as possible so as for more accurate analysis of debris flow, the analysis of debris flow has been so far conducted by using sparsely divided grids due to the limitation of analysis algorithm, computational ability and running time. So, it is necessary to suggest an appropriate grid size for the practical approaches. Therefore, this study presents the evaluation of the effect of the size of a grid on the debris flow besides the factors which referred to the previous studies such as accumulated rainfall, rainfall intensity and rainfall duration time. From this, it enables to suggest a rational and practical grid size for topography to be divided.

• Food Science of Animal Resources
• /
• v.34 no.4
• /
• pp.552-557
• /
• 2014

This study investigated the effects of ${\gamma}$-aminobutylic acid (GABA) on the quality and sensorial properties of both the GABA/NaCl complex and model meat products. GABA/NaCl complex was prepared by spray-drying, and the surface dimensions, morphology, rheology, and saltiness were characterized. For model meat products, pork patties were prepared by replacing NaCl with GABA. For characteristics of the complex, increasing GABA concentration increased the surface dimensions of the complex. However, GABA did not affect the rheological properties of solutions containing the complex. The addition of 2% GABA exhibited significantly higher saltiness than the control (no GABA treatment). In the case of pork patties, sensory testing indicated that the addition of GABA decreased the saltiness intensity. Both the intensity of juiciness and tenderness of patties containing GABA also scored lower than the control, based on the NaCl reduction. These results were consistent with the quality characteristics (cooking loss and texture profile analysis). Nevertheless, overall acceptability of the pork patties showed that up to 1.5%, patties containing GABA did not significantly differ from the control. Consequently, the results indicated that GABA has a potential application in meat products, but also manifested a deterioration of quality by the NaCl reduction, which warrants further exploration.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.9
• /
• pp.1387-1392
• /
• 2018

Objective: In a nucleus breeding scheme, the sire of dam's pathway plays an important role in producing genetic improvement. Selection proportion is the key parameter for predicting selection intensity, through truncating the normal distribution. Semen sexing using flow cytometry reduces the number of vials of sperm that can be obtained from a proved bull. In addition, a lower fertility of this kind of sperm is expected because of the lower sperm dosage in sex sorted semen. Both of these factors could affect the selection proportion in the sire of dam's pathway ($p_{SD}$). Methods: In the current study, through a deterministic simulation, effect of utilizing sex sorted semen on selection ($p_{SD}$) was investigated in three different strategies including 1: continuous use of sex sorted semen in heifers (CS), 2: the use of sex sorted semen for the first two (S2) and 3: the first (S1) inseminations followed by conventional semen. Results: Results indicated that the use of sex sorted semen has a negative impact on the sire of dams (SD) pathway due to increase in selection proportion. Consequently selection intensity was decreased by 10.24 to 20.57, 6.38 to 8.87 and 3.76 to 6.25 percent in the CS, S2, and S1 strategies, respectively. Conclusion: Considering the low effect of sexed semen on genetic improvement in dam pathways, it is necessary to consider the joint effect of using sex sorted semen on the sire and dams pathway to estimate about the real effect of sexed semen on genetic improvement in a nucleus breeding scheme.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.1 s.52
• /
• pp.91-102
• /
• 1996

Low back pain patients and controls of shipyard workers were surveyed between June 1995 and September 1995 to identify risk factors of industrial low back pain. The patients were 17 male workers who had got medical treatment for over 3 days because of industrial back pain. Controls were 51 male workers who had not have musculoskeletal disorder for one year before the survey. By univariate analysis, the workers who did overtime work 4 times or more for the last 2 weeks showed odds ratio of 3.67 on low back pain with the workers who did less overtime work. Carrying heavy materials was also associated with the low back pain and the odds ratio increased with the increase of carrying weight. Work space and work posture were not associated with the low back pain significantly. The welder had higher odds ratio than the other workers on low back pain. The duration of employment and job satisfaction did not affect the risk of low back pain. Multiple logistic regression analysis showed that frequency of overtime work for the last 2 weeks and carrying heavy materials among the risk factors were associated significantly with the low back pain. We found that important risk factors of low back pain of shipyard workers are work intensity factors such as overtime work and carrying heavy weight.

• Journal of the Korean Society of Food Culture
• /
• v.30 no.5
• /
• pp.674-681
• /
• 2015

The purpose of this study was to analyze factors affecting acceptance of four kinds of dak-jjim samples in third year school-aged children (n=100). Soy sauce, red pepper paste, Vietnam fish sauce, and star anise were applied to samples for their familiar and exotic characteristics. Significant differences among samples were observed in odor, taste, and acceptance (p<0.001). Soy (Soy sauce sample), RPPaste (Red pepper paste sample), and Soy_FishS (Soy sauce and Vietnam fish sauce sample) samples scored higher than Soy_StarA (Soy sauce and star anise sample) sample. On the other hand, there were no significant differences in intensities of saltiness, sweetness, and hot spicy flavor (p>0.05). Liked attributes in samples were saltiness, sweetness, chicken flavor, potato flavor, moistness of chicken, hot spicy flavor, and color. Disliked attributes in samples were hot spicy flavor, saltiness, and ginger flavor. Significant differences among samples were observed in familiar intensity and willing to try again (p<0.001). Soy, RPPaste, and Soy_FishS samples scored higher than Soy_StarA sample. Panels considered taste (46%) and nutrition (45%). Higher familiar intensity of sample was associated with higher acceptance in samples. In other words, familiarity of food affects acceptance of food. Therefore, familiar ingredients such as soy sauce and chicken can be used for development of Korean menu items considering taste and nutrition with enhanced Korean food acceptance in school-aged children.

• Journal of Power System Engineering
• /
• v.4 no.1
• /
• pp.81-87
• /
• 2000

In this study, CT specimens were prepared from ASTM SA516 Gr. 70 which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C,\;-60^{\circ}C,\;-80^{\circ}C\;and\;-100^{\circ}C$ and in the range of stress ratio of 0.05 by means of opening mode displacement. At the constant stress ratio, the threshold stress intensity factor range ${\Delta}K_{th}$ in the early stage of fatigue crack growth (Region I) and stress intensity factor range ${\Delta}K$ in the stable of fatigue crack growth (Region II) was increased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm $d{\alpha}/dN\;-{\Delta}K$ in Region II, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It assumed that the fatigue crack growth rate $d{\alpha}/dN$ is rapid in proportion to descend temperature in Region II and the cryogenic-brittleness greatly affect a material with decreasing temperature.

• Proceedings of the KWS Conference
• /
• 2001.05a
• /
• pp.224-227
• /
• 2001

In this study, CT specimens were prepared hem ASTM SA516 which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C$, -3$0^{\circ}C$, -6$0^{\circ}C$, -8$0^{\circ}C$, -l$0^{\circ}C$ and -l2$0^{\circ}C$ and in the range of stress ratio of 0.1, 0.3 by means of opening mode displacement. At the constant stress ratio, the threshold stress intensity factor range $\Delta K_{th}$ in the early stage of fatigue crack growth ( Region I ) and stress intensity factor range $\Delta$K in the stable of fatigue crack growth ( Region II) was increased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm da/dN - $\Delta$K in Region II, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It assumed that the fatigue crack growth rate da/dN is rapid in proportion to descend temperature in Region H and the cryogenic-brittleness greatly affect a material with decreasing temperature.