• Journal of Positioning, Navigation, and Timing
• /
• v.13 no.1
• /
• pp.53-61
• /
• 2024

Global Navigation Satellite Systems are expected to meet system-defined integrity requirements when users utilize the system for safety critical applications. While the guaranteed integrity performance of GPS and Galileo is publicly available, their integrity assurance procedure and related methodology have not been released to the public in an official document format. This paper summarizes the integrity assurance procedures of Global Positioning System (GPS) and Galileo, which were utilized during their system development, through a literature survey of their integrity assurance methodology. GPS Block II assures system integrity using the following methods: continuous performance monitoring and maintenance on Space Segment (SS) and Control Segment (CS), through a cause and effect analysis of anomalies and a failure analysis. In GPS Block III, to achieve more stringent integrity performance, safety requirements are integrated into the system design and development from its starting phase to the final phase. Galileo's integrity performance is provided in the Integrity Support Message (ISM) format, as Galileo utilizes a Dual Frequency Multi Constellation (DFMC) Satellite Based Augmentation System (SBAS) and Advanced Receiver Autonomous Integrity Monitoring (ARAIM) to serve safety critical applications. The integrity performance of Galileo is ensured by using a methodology similar to GPS Block II (i.e. continuous performance monitoring and maintenance on the system). The integrity assurance procedures reviewed in this paper can be utilized for a new satellite navigation system that will be developed in the near future.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.5
• /
• pp.70-76
• /
• 2016

Tensile and compressive strength tests were conducted to investigate the mechanical characteristics of aluminized paraffin wax fuel for hybrid gas generator applications. Mixtures of 0 wt%, 10 wt% and 30 wt% nano aluminum paraffin coupons as well as 5 wt%, 10 wt% and 15 wt% micro aluminum paraffin coupons were used. The average particle size of 100nm and of $8{\mu}m$ mixed each with microcrystalline paraffin wax(Sasol 0907) were chosen for the base specimens where the tensile strength test followed the ASTM-D638 specimen standard while the compressive strength test followed the ASTM D575-91. It was found that nano based specimens increased both the tensile and compressive strength enhancing the mechanical behavior of paraffin wax whereas the micro based specimens gave still less influential effect.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.9
• /
• pp.779-788
• /
• 2014

The satellite should generate electric power efficiently to perform the mission successfully within limited power. For this reason, the electrical power system of LEO satellites usually regulates the power which is generated from the solar cells using MPPT (Maximum Power Point Tracking) method. This paper proposes advanced MPPT algorithm based on the fuzzy logic applied to small CubeSat satellite. The simulation has been performed to confirm the validity of the proposed method by interlocking between MATLAB/Simulink and STK (Systems Tool Kit). The EBA(Energy Balance Analysis) has also been performed at two different pointing modes of KAUSAT-5 for solar irradiation according to the satellite orbit and attitude, and load capacity varied with operation modes by Simulink and STK. The performance of fuzzy logic-based MPPT algorithm was verified through the EBA. The validity of the proposed MPPT algorithm based on the fuzzy logic was also confirmed by comparing with P&O (Perturbation & Observation) algorithm that is general in the MPPT.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.2
• /
• pp.227-235
• /
• 2006

For a sophisticated humanoid that explores and learns its environment and interacts with humans, anthropomorphic physical behavior is much desired. The human vision system orients each eye with three-degree-of-freedom (3-DOF) in the directions of horizontal, vertical and torsional axes. Thus, in order to accurately replicate human vision system, it is imperative to have a simulator with 3-DOF end-effector. We present a 3-DOF anthropomorphic oculomotor system that reproduces realistic human eye movements for human-sized humanoid applications. The parallel link architecture of the oculomotor system is sized and designed to match the performance capabilities of the human vision. In this paper, a biologically-inspired mechanical design and the structural kinematics of the prototype are described in detail. The motility of the prototype in each axis of rotation was replicated through computer simulation, while performance tests comparable to human eye movements were recorded.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.2
• /
• pp.264-277
• /
• 2015

This article investigates various transcription techniques for the Legendre pseudospectral (PS) method to compare the pros and cons of each approach. Eight combinations from four different types of collocation points and two discretization methods for dynamic constraints, which differentiate Legendre PS transcription techniques, are implemented to solve a carefully selected test set of nonlinear optimal control problems (NOCPs). The convergence property and prediction accuracy are compared to provide a useful guideline for selecting the best combination. The tested NOCPs consist of the minimum time, minimum energy, and problems with state and control constraints. Therefore, the results drawn from this comparative study apply to the solution of similar types of NOCPs and can mitigate much debate about the best combinations. Additionally, important findings from this study can be used to improve the numerical efficiency of the Legendre PS methods. Three PS applications to the aerospace engineering problems are demonstrated to prove this point.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.06a
• /
• pp.338-339
• /
• 2016

손 제스처는 스마트 글래스 등 웨어러블 기기의 NUI(Natural User Interface)로 부각되고 있으며 이를 위해서는 손 제스처 검출 및 인식 기능이 요구된다. 또한, 최근 MPEG 에서는 IoT(Internet of Thing) 환경에서의 미디어 소비를 위한 표준으로 IoMTW(Media-centric IoT and Wearable) 사전 탐색이 진행되고 있으며, 손 제스처를 표현하기 위한 메타데이터도 하나의 표준 기술요소로 논의되고 있다. 본 논문에서는 스마트 글래스 환경에서의 손 제스처 인식을 위한 과정으로 스테레오 영상을 통한 손 윤곽선 검출과 이를 메타데이터로 서술하기 위하여 베지에(Bezier) 곡선으로 표현하는 기법을 제시한다.

• Structural Engineering and Mechanics
• /
• v.18 no.1
• /
• pp.125-135
• /
• 2004

Industrial structure systems may have nonlinearity, and are also sometimes exposed to the danger of random excitation. This paper proposes a method to analyze response and reliability design of a complex nonlinear structure system under random excitation. The nonlinear structure system which is subjected to random process is modeled by finite element method. The nonlinear equations are expanded sequentially using the perturbation theory. Then, the perturbed equations are solved in probabilistic methods. Several statistical properties of random process that are of interest in random vibration applications are reviewed in accordance with the nonlinear stochastic problem.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.509-511
• /
• 2004

This paper outlines the development of image processing system, which will allow the general users in Government and Public organizations easily to use and apply KOMPSAT EOC images in their own business. The system includes an import/export module of EOC image distributed in Hierarchical Data Format (HDF) file and various image processing analysis modules. Especially, the image mosaic and subset functions are designed to use EOC image as an image map, generating the Ortho-image module. To update the various spatial data with EOC image, some essential modules such as change detection by pattern recognition, overlay between images and vector data, and modification of vector data are implemented in the system. The system is developed based on the user request analysis of government agency, and suited for more efficient use of satellite image in public applications. Such system is expected to contribute to practical application of KOMPSAT-2 that will be launched in 2005. Further efforts will be made to accommodate the KOMPSAT -2 MSC data.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.245-245
• /
• 2006

Recent studies of single wall carbon nanotube (SWNT)/polyimide nanocomposites indicate that these materials have a potential to provide the combination of structural integrity and sensing/actuation capability. This study shows the effect of the SWNT type and concentration on the dipole orientation and piezoelectric properties of the electroactive polymide nanocomposites using a thermally stimulated current (TSC) spectroscopy. These nanocomposites exhibit very thermally stable piezoelectric properties up to $150^{\circ}C$. This presentation will highlight the dipole orientation and electroactive characteristics of the SWNT/polyimide nanocomposites and discuss their potential multifunctional aerospace applications.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2017.11a
• /
• pp.58-59
• /
• 2017

손 제스처는 스마트 글라스 등 웨어러블 기기의 NUI(Natural User Interface)를 구현하기 위한 수단으로 주목받고 있다. 최근 손 제스처 인식에서의 인식률 개선을 위하여 다양한 인식기법이 제안되고 있으며, 딥러닝 기반의 손 제스처 인식 기법 또한 활발히 연구되고 있다. 본 눈문에서는 웨어러블 기기에서의 미디어 소비 등 다양한 응용을 위하여 CNN(Convolutional Neural Network) 기반의 손 제스처 인식 기법을 제시한다. 제시된 기법은 스테레오 영상으로부터 깊이 정보와 색 정보를 이용하여 손 윤곽선을 검출하고, 검출된 손 윤곽선 영상을 데이터 셋으로 구성하여 CNN 에 학습을 시킨 후, 이를 바탕으로 손 윤곽선 영상으로부터 제스처를 인식하는 알고리즘을 제안한다.