• Advances in aircraft and spacecraft science
• /
• 제11권2호
• /
• pp.177-194
• /
• 2024

The objective of this paper is to compute entire flow field over Apollo-II, Aerospace Reentry Demonstrator (ARD), Orbital Experiment (OREX) with sharp shoulder and rounded shape shoulder and Space Recovery Experiment (SRE) at different flare-cone half-angle of 20° and 35°. This paper addresses numerical solutions of the compressible three-dimensional Euler equations on hexahedral meshes for a freestream Mach 6 and at an angle of incidence 5°. Furthermore, spatial discretization is accomplished by a cell centred finite volume formulation solution and advanced in time by an explicit multi-stage Runge-Kutta method. The flow field characteristics, distribution of surface pressure coefficient and Mach number on fore-body and aft-body are presented as a function of the geometrical parameters of many reentry capsules. The surface pressure variation is numerically integrated to obtain the aerodynamic drag and compared well with impact theory. The present numerical study has observed the significant dependence of the blunt body and the aft-body geometry of the vehicle and can be used to study atmospheric conditions during re-entry trajectory. The numerical analysis reveals the significant influence of capsule geometry on the flow characteristics of the mechanism of upstream and structure of the flow near the wake region and aerodynamic drag coefficient.

• 한국항공우주학회지
• /
• 제45권1호
• /
• pp.1-9
• /
• 2017

본 논문은 초음속 공탄성(aeroelastics) 해석 시간 절약을 위한 준-정상 축약 모델을 제안하고 이를 검증하였다. 유동이 초음속이고 유동의 특성시간이 구조변형의 특성시간에 비해 작을 경우, 유동의 비정상성이 작아 비정상 유동해 대신 정상 유동해를 이용하여 공탄성 해석을 할 수 있다. 크리깅 기법을 적용하여 유동의 축약모델을 구축하였다. 매 시간 축약모델로부터 예측된 표면해가 구조해석의 경계조건으로 사용되었다. 크리킹 기법을 적용한 축약모델을 비정상해석 결과와 비교하여 검증하였다.

• 대한후두음성언어의학회지
• /
• 제11권1호
• /
• pp.12-19
• /
• 2000

Background and Objectives : Dysphonia may be secondary to many different type of benign vocal cord lesions such as vocal polyp, vocal nodule, Reinke's edema, and intracordal cyst. Diagnosis and treatment of intracordal cysts are more difficult than other benign vocal cord lesions. But postoperative voice analysis of intracordal cyst have rarely been reported in the literature. The purpose of this study is to analyze aerodynamic and acoustic results and videostroboscopic findings before and after laryngomicrosurgery. Materials and Methods : We reviewed the pre and post-operative voice analysis results and videostroboscopic findings of 15 surgically treated patients of intracordal cysts at Severance hospital from Jun. 1997 to Nov. 1999 retrospectively. They were diagnosed with videostroboscopic findings, surgical findings, and pathologic reports. Their pre and post-operative speech were analyzed with MDVP(Multi Dimension Voice Analysis Program) of CSL(Computerized Speech Lab) and Aerophone II. Their pre and post-operative mucosal wave of true vocal cord was analyzed with videostroboscopy. In order to compare this results with normal group, 10 of normal persons were evaluated with same methods. Results : After the operation, mucosal wave of true vocal cord was improved in all patients. Postoperative acoustic and aerodynamic results were improved in almost parameters, but they did not reach the normal value. Conclusions : Videostroboscopy was essential in diagnosing intracordal cysts. By comparing the acoustic and aerodynamic results and video-stroboscopic findings before and after the laryngomicrosurgery, postoperative vocal function was defined more accurately and objectively. Almost parameters may be useful in assessing the quantitative changes in vocal quality before and after the laryngomicrosurgery.

• 한국항공우주학회지
• /
• 제34권1호
• /
• pp.18-23
• /
• 2006

본 연구에서는 Gurney 플랩이 달린 NACA 0012 익형에 대한 플러터 해석을 시간 영역에서 수행하였다. 2차원 비정상 압축성 Navier-Stokes 방정식과 Lagrange 방정식으로 부터 유도한 2계 자유도 plunge & pitch 모델을 지배방정식으로 하여 연성 결합 기법을 통해 플러터 해석을 수행하였다. 계산 결과 Gurney 플랩을 장착할 경우 NACA 0012에 비해 플러터가 발생하는 속도가 낮아졌고, 마하수가 0.85보다 작은 영역에서는 Gurney 플랩의 플러터 경계 곡선은 안전 여유를 상회하는 영역에 위치하였다. 그러나, 마하수가 0.85에서 0.9사이일 경우에는 안전 여유에 근접하게 되므로 이러한 운용 영역에서는 Gurney 플랩의 사용에 주의를 요한다.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권1호
• /
• pp.43-57
• /
• 2012

In a modern aircraft, there are many variations in its mass, stiffness, and aerodynamic characteristics. Recently, an analytical approach was proposed, and this approach uses the idea of uncertainty to find out the most critical flight flutter boundary due to the variations in such aerodynamic characteristics. An analytical method that has been suggested to predict robust stability is the mu method. We previously analyzed the robust flutter boundary by using the mu method, and in that study, aerodynamic variations in the Mach number, atmospheric density, and flight speed were taken into consideration. The authors' previous attempt and the results are currently quoted as varying Mach number mu analysis. In the author's previous method, when the initial flight conditions were located far from the nominal flutter boundary, conservative predictions were obtained. However, relationships among those aerodynamic parameters were not applied. Thus, the varying Mach number mu analysis results required validation. Using an optimization approach, the varying Mach number mu analysis was found out to be capable of capturing a reasonable robust flutter boundary, i.e., with a low percentage difference from boundaries that were obtained by optimization. Regarding the optimization approach, a discrete nominal flutter boundary is to be obtained in advance, and based on that boundary, an interpolated function was established. Thus, the optimization approach required more computational effort for a larger number of uncertainty variables. And, this produced results similar to those from the mu method which had lower computational complexity. Thus, during the estimation of robust aeroelastic stability, the mu method was regarded as more efficient than the optimization method was. The mu method predicts reasonable results when an initial condition is located near the nominal flutter boundary, but it does not consider the relationships that are among the aerodynamic parameters, and its predictions are not very accurate when the initial condition is located far from the nominal flutter boundary. In order to provide predictions that are more accurate, the relationships among the uncertainties should also be included in the mu method.

• 한국항공우주학회지
• /
• 제49권7호
• /
• pp.539-547
• /
• 2021

회전익 항공기의 로터 블레이드는 공기역학, 구조적 유연성, 제어 가능성 등의 상호작용 효과를 고려한 설계가 필요하다. 역설계는 형상정보 및 실험결과를 통해 공통된 특성을 갖는 구성품을 설계할 때 유용하게 사용될 수 있다. 본 논문에서는 BO-105 헬리콥터의 복합재 로터 블레이드를 선정하여 공통된 특성을 갖도록 역설계하고자 하였다. 이를 위해 로터 블레이드를 여러 구간으로 나누어 복합재료가 단면에 따라 연속적으로 적층될 수 있도록 역설계를 수행하였다. 각 구간에 대해서는 variational asymptotic beam sectional analysis (VABS) 단면해석 프로그램을 사용하여 설계안의 플랩 방향, 래그 방향 및 비틀림 강성값이 실험 결과와 일정 수준 이하의 차이를 갖도록 하였다. 최종으로 CAMRAD II를 통해 특정 비행 조건에서 로터 블레이드에 작용하는 하중을 예측한 후 설계된 블레이드가 구조적으로 유효한지 확인하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권4호
• /
• pp.356-365
• /
• 2014

This paper is the second in a series and aims to build a high-fidelity mathematical model for a propeller-driven airplane using the propeller's aerodynamics and inertial models, as developed in the first paper. It focuses on aerodynamic models for the fuselage, the main wing, and the stabilizers under the influence of the wake trailed from the propeller. For this, application of the vortex lattice method is proposed to reflect the propeller's wake effect on those aerodynamic surfaces. By considering the maneuvering flight states and the flow field generated by the propeller wake, the induced velocity at any point on the aerodynamic surfaces can be computed for general flight conditions. Thus, strip theory is well suited to predict the distribution of air loads over wing components and the viscous flow effect can be duly considered using the 2D aerodynamic coefficients for the airfoils used in each wing. These approaches are implemented in building a high-fidelity mathematical model for a propeller-driven airplane. Flight dynamic analysis modules for the trim, linearization, and simulation analyses were developed using the proposed techniques. The flight test results for a series of maneuvering flights with a scaled model were used for comparison with those obtained using the flight dynamics analysis modules to validate the usefulness of the present approaches. The resulting good correlations between the two data sets demonstrate that the flight characteristics of the propeller-driven airplane can be analyzed effectively through the integrated framework with the propeller and airframe aerodynamic models proposed in this study.

• 한국항공우주학회지
• /
• 제38권6호
• /
• pp.547-556
• /
• 2010

항공기의 안전성 확보 및 투하되는 탄의 정확도 증대를 위한 새로운 개념의 활공비행체 개발이 많은 기업에서 진행 중에 있다. 항공기의 장착 공간 및 활공거리 증대를 고려하여 세장비가 큰 전개되는 날개를 채택하는 것이 일반적이다. 큰 세장비의 날개 구조물은 상대적으로 낮은 강성에 의하여 과도한 탄성변형 뿐 아니라 플러터 발생의 가능성이 높아지게 된다. 본 연구는 큰 세장비 날개에 대하여 유체-공력 연계기법을 이용, 구조변형에 의한 공력특성의 변화 및 플러터 발생가능성에 대하여 검토하였다. 공기력 계산을 위하여 FLUENT 코드가 구조 동특성 해석을 위하여 ABAQUS 상용코드가 사용되었으며, 국부지지 방사기저함수로 구성된 Code-bridge를 이용한 입력 자료의 보간 및 사상을 수행하였다. 해석 결과 고려된 활공 조건에서 구조 변형에 의한 공력 특성의 변화가 발생하는 것이 관측되었으며, 이에 의한 진동도 계속적으로 발생되는 것으로 표현되었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권2호
• /
• pp.122-132
• /
• 2013

In this research the development of unstructured grid discretization solution techniques is presented. The purpose is to describe such a conservative discretization scheme applied for experimental validation work. The objective of this paper is to better establish the effects of mesh generation techniques on velocity fields and particle deposition patterns to determine the optimal aerodynamic characteristics. In order to achieve the objective, the mesh surface discretization approaches used the VLA prototype manufacturing tolerance zone of the outer surface. There were 3 schemes for this discretization study implementation. They are solver validation, grid convergence study and surface tolerance study. A solver validation work was implemented for the simple 2D and 3D model to get the optimum solver for the VLA model. A grid convergence study was also conducted with a different growth factor and cell spacing, the amount of mesh can be controlled. With several amount of mesh we can get the converged amount of mesh compared to experimental data. The density around surface model can be calculated by controlling the number of element in every important and sensitive surface area of the model. The solver validation work result provided the optimum solver to employ in the VLA model analysis calculation. The convergence study approach result indicated that the aerodynamic trend characteristic was captured smooth enough compared with the experimental data. During the surface tolerance scheme, it could catch the aerodynamics data of the experiment data. The discretization studies made the validation work more efficient way to achieve the purpose of this paper.

• 한국항공우주학회지
• /
• 제35권6호
• /
• pp.496-502
• /
• 2007

본 논문에서는 비선형적 다물체 시스템의 유한요소 해석프로그램인 DYMORE의 새로운 버전을 이용하여 압전 재료(piezoelectric)를 삽입한 능동 비틀림 로터(Active Twist Rotor)의 개별 블레이드 제어(Individual Blade Control)에 의한 로터 블레이드의 진동 감소 효과를 해석하고 이를 풍동실험 및 이전 버전의 DYMORE 결과와 비교하였다. 본 연구에서는 로터 허브와 네 개의 블레이드만으로 구성된 단순한 로터시스템과 스워시 판, 피치링크 등을 모두 포함하는 개선된 로터시스템에 대한 해석이 각각 수행되었다. 사용된 실험 결과 자료들은 NASA Langley의 Transonic Dynamics Tunnel(TDT)에서 수행되었던 결과들을 사용하였다. 그 결과 새로운 버전의 DYMORE를 이용한 경우 실험값과는 여전히 차이가 있지만 이전 버전의 DYMORE를 통해 얻어진 수치해석 결과에 비해서 오차가 개선되는 것을 확인할 수 있었다. 또한 개별 블레이드 제어 방식의 로터 시스템의 모델링을 수행하고 전진 비행 시의 진동 하중 감소 효과를 확인하였다.